2015 PEUGEOT 108 lights

4
108_en_Chap00b_vue-ensemble_ed01-2015
exterior
102
81 91
33
Electronic key: Keyless
Entry and Starting
this system allows the locking, unlocking and
starting the vehicle by keeping the key on your
person and in the recognition zone.
Stop & Start
this system puts the engine temporarily
into standby during stops in the traffic (red
lights, traffic jams, etc...). t
h
e engine restarts
automatically as soon as you want to move
off.
t
h
e Stop & Start system reduces fuel
consumption, exhaust emissions and the noise
level when stationary.
Under-inflation detection
this system automatically checks the tyre
pressures when driving and alerts you in the
event of an under-inflated tyre.
Active City Brake
the aim of this system is to avoid a frontal
collision or reduce the speed of impact if the
driver fails to react or reacts too late.
Lane departure warning
system
this system gives a warning if you inadvertently
cross a longitudinal road marking.
108
Over view

21
108_en_Chap01_controle-de-marche_ed01-2015
Parking brakefixed, accompanied by
an audible signal.th e parking brake is applied or not
properly released. Release the parking brake to switch off the warning
lamp, keeping your foot on the brake pedal.
Observe the safety recommendations.
For more information on the parking brake, refer to the
corresponding section.
Warning / indicator lamp
StateCause Action / Observations
Passenger's
front airbag fixed in the seat belt
and passenger's front
airbag warning lamps
display.
th

e control switch, located in the
glove box, has been placed in the
"ON" position.
the

passenger's front airbag is activated.
In this case, do not install a rear ward facing child seat.
Stop & Star t
(VTi 68 S&S
engine) fixed.
When the vehicle stops (red lights,
traffic jams...) the Stop & Start system
has put the engine into S
tO

P mode.
th
e indicator lamp goes off and the engine restarts
automatically in S
tA

R
t
mode, as soon as you want to
move off.
Keyless Entr y
and Starting
system fixed.
th

e conditions for starting are met. For more information, refer to the "Starting - switching off the engine with the Keyless
e
n
try and Starting
system" section.
flashing slowly.
th

e vehicle is in "ACC" mode.
th

e accessories (audio system,
12V socket...) can be used.
1
Monitoring

81
108_en_Chap05_conduite_ed01-2015
Stop & Start (Vti 68 S&S engine)
Operation
Going into engine STOP mode
this indicator lamp comes on in the
instrument panel and the engine
goes into standby automatically:
-

w

hen stationary, in neutral, and you
release the clutch pedal.
Never refuel with the engine in S
tO

P
mode; you must switch off the ignition
with the button. For smoother operation, during
parking manoeuvres S
tO

P mode is
not available for a few seconds after
coming out of reverse gear.
S
tO

P mode does not affect the
vehicle's systems, such as for example,
braking, power steering...
Special cases: STOP mode not
available
StOP mode is not invoked principally when:
- t he driver's door is open,
-

t
he driver's seat belt is not fastened,
-

t
he engine is needed to maintain a
comfortable temperature in the passenger
compartment,
-
d

emisting is active,
-
s

ome special conditions (battery charge,
engine temperature, braking assistance,
vehicle stopped on a steep gradient, high
altitude...) where the engine is needed to
assure control of a system.
th

e Stop & Start

system puts the engine temporarily into standby - S
tO

P mode - during stops in the traffic (red lights, traffic jams, or other...). t
h
e
engine restarts automatically - S
tA

R
t

mode - as soon as you want to move off.
t
h

e restart takes place instantly, quickly and silently.
Per fect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
Stop & Start time counters
A partial time counter counts the periods in
StO P mode during a journey.
It is displayed in the trip computer once the
Stop & Start acts.
Press one of the screen management buttons
to return to the previous display.
A global time counter counts the periods in
S
tO

P mode since the last reset.
When it is displayed, press one of the screen
management buttons to reset the counter.
5
Driving

243
108_en_Chap13_recherche-visuelle_ed01-2015
Keys 30
Remote control 3 1-32
Keyless
e
n
try and
Starting system

3
3 -36
Remote control battery

3
2, 36
Starting

6
9, 70 -72
exterior
Door mirrors 4 9
Lighting control stalk
93
-97
Adjusting the headlamps
9

8
Changing bulbs
1

49-151, 153
-

f
ront lamps
-
d

irection indicator repeaters
Doors


37-39
-
ope

ning / closing
-

c
entral locking
el

ectric windows
4
0
Quarter lights (5 -door)

4
0 W ip e r s


9 9 -10 0
Changing a wiper blade
1
66
Boot 38-39te
mporary puncture repair kit 1 38-142
Reversing camera
9

0
to

w i n g
1
6 7
Changing bulbs
1

52-153
-
r

ear lamps
-
3
rd brake lamp
-
n
umber plate lamps
Fuel tank, refuelling

1
36 -137
Fuel gauge

2
5
ele

ctronic stability programme
1

05-107
Snow chains

1

48
un

der-inflation detection
1

02-104
ty

re pressures
1

41-142, 182
Changing a wheel
1

43-147
-

tools
-

r

emoval / fitting
ele

ctric fabric roof
4

1-44
Roof bars

1

68
Accessories


169-170
.
Visual search