2015 NISSAN SENTRA light

[x] Cancel search: light

Page 358 of 402

NISSAN SENTRA 2015 B17 / 7.G Owners Manual EXTERIOR AND INTERIOR LIGHTS
ItemWattage (W)Bulb No.
Headlight assembly Low/Daytime running lamp (Canada only) 55H11
High 65H9
Turn 28WY28/8W
Park ——
Side marker 3.8194
Door mirror turn signal lig

Page 359 of 402

NISSAN SENTRA 2015 B17 / 7.G Owners Manual 1. Map light
2. Interior light
3. Door mirror turn signal light (if soequipped)
4. Headlight assembly
5. Fog light (if so equipped)
6. High-mount stop light
7. Trunk light
8. License plate light
9. Re

Page 360 of 402

NISSAN SENTRA 2015 B17 / 7.G Owners Manual Use a cloth1to protect the interior light housing.
Replacing the rear combination light
bulbs
The rear combination light assembly must be
removed from the vehicle to replace the light
bulbs, see your

Page 369 of 402

NISSAN SENTRA 2015 B17 / 7.G Owners Manual Replacing wheels and tires
When replacing a tire, use the same size, tread
design, speed rating and load carrying capacity
as originally equipped. Recommended types and
sizes are shown in “Wheels an

Page 373 of 402

NISSAN SENTRA 2015 B17 / 7.G Owners Manual The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure
described in the “Maintenance and do-it-yourself” section to

Page 376 of 402

NISSAN SENTRA 2015 B17 / 7.G Owners Manual ●If a methanol blend is used, it should
contain no more than 5% methanol
(methyl alcohol, wood alcohol) . It
should also contain a suitable amount
of appropriate cosolvents and corro-
sion inhibitor

Page 385 of 402

NISSAN SENTRA 2015 B17 / 7.G Owners Manual Use the following steps to mount the front license
plate:
1Make holes on the plastic finisher at the
location mark (small dimple) using a 0.20 in
(5 mm) drill. Apply light pressure to the drill.
Inst

Page 392 of 402

NISSAN SENTRA 2015 B17 / 7.G Owners Manual Due to legal requirements in some states and
Canadian Provinces, your vehicle may be re-
quired to be in what is called the “ready condi-
tion” for an Inspection/Maintenance (I/M) test of
the emis