2015 NISSAN ROGUE stop start

[x] Cancel search: stop start

Page 298 of 440

NISSAN ROGUE 2015  Owner´s Manual the accelerator pedal by depressing the
brake pedal and pushing the push-button
ignition switch to start the engine. If the
engine starts, but fails to run, repeat the
above procedure.
CAUTION
Do not

Page 299 of 440

NISSAN ROGUE 2015  Owner´s Manual 2. Keep the foot brake pedal depressed andmove the shift lever to a driving position.
3. Release the parking brake and foot brake pedal, and then gradually start the vehicle in
motion.
WARNING
●Do n

Page 300 of 440

NISSAN ROGUE 2015  Owner´s Manual CAUTION
Use the P (Park) or R (Reverse) position
only when the vehicle is completely
stopped.
P (Park)
CAUTION
To prevent transmission damage, use the
P (Park) position only when the vehicle is
comple

Page 301 of 440

NISSAN ROGUE 2015  Owner´s Manual 5. Press the shift lever button and move theshift lever to the N (Neutral) position while
holding down the shift lock release. The
vehicle may be moved to the desired loca-
tion. Replace the removed s

Page 310 of 440

NISSAN ROGUE 2015  Owner´s Manual BSW/LDW TEMPORARY DISABLED
STATUS
Under the following condition, the BSW and/or
LDW system is turned off temporarily, the BSW
light and/or LDW light will blink, and either of the
following message wil

Page 315 of 440

NISSAN ROGUE 2015  Owner´s Manual ●The system is designed to automatically
check the sensor’s functionality. If the
sensor area of the front bumper is cov-
ered with ice, a transparent or translu-
cent bag, etc., the system may no

Page 317 of 440

NISSAN ROGUE 2015  Owner´s Manual Follow these easy-to-use Fuel Efficient Driving
Tips to help you achieve the most fuel economy
from your vehicle.1. Use Smooth Accelerator and Brake
Pedal Application
● Avoid rapid starts and stops.

Page 318 of 440

NISSAN ROGUE 2015  Owner´s Manual 10.Keeping your Vehicle Cool
● Park your vehicle in a covered parking
area or in the shade whenever possible.
● When entering a hot vehicle, opening the
windows will help to reduce the inside
temp