2015 NISSAN PULSAR Panel


> (GLW   0RGHO &$@
ENGINE COOLANT TEMPERATURE
GAUGE
GUID-C52 CA372-EAD4 -42AF-BEA6-2FBA08B4 6DF4
JVI0279X
T ype A
JVI0629X
T ype B
The engine coolant temperature gaugeindicates the
engine coolant temperature.
The engine coolant temperature isnormal whenthe
gauge needle pointswithinthezone
*
1
shown inthe
illustration.
The engine coolant temperature willvary with the
outside airtemperature anddriving conditions.
CAUTION:
. Ifthe gauge indicates enginecoolant tem-
perature nearthehot (H)end ofthe normal
range, reduce vehicle speedtodecrease
temperature.
. Ifthe gauge isover thenormal range,stop
the vehicle assoon assafely possible.
. Ifthe engine isoverheated, continuedop-
eration ofthe vehicle mayseriously damage
the engine. (SeeªIfyour vehicle overheatsº
(P .6-7) forimmediate actionrequired.)
FUEL GAUGE
GUID-1C71 2BA5-30E9- 4629-B9C3-BDF27E432 243
JVI0280X
The fuelgauge indicates theapproximate fuellevel in
the tank when theignition switchisin the ªONº
position.
The gauge maymove slightly duringbraking, turning,
accelerating, orgoing upand down hillsdueto
movement offuel inthe tank.
The lowfuel warning
light
illuminates whenthe
fuel level inthe tank isgetting low.Refuel assoon asit
is convenient, preferablybeforethegauge reads0.
The arrow
,
, indicates thatthefuel filler lidis located
onthe right sideofthe vehicle.
CAUTION:
Refuel before thegauge reads0(empty) .
There isasmall reserve offuel inthe tank when thefuel
gauge reads0(empty) .
INSTRUMENT BRIGHTNESS CONTROL
GUID-5A2F 864F-23EF-4936-8E CF-B52B0FC 47BEE
JVI0458X
The instrument brightness controloperates whenthe
ignition switchisin the ªONº position.
Push the+side ofthe switch toincrease the
brightness ofthe meter panel. Pushthe-side ofthe
switch todecrease thebrightness ofthe meter panel.
When thebrightness levelreaches themaximum or
minimum, abeep willsound.
Instrument sand controls
2-7
&RQGLWLRQ


> (GLW   0RGHO &$@
Front foglights indicator light(if
equipped)
GUID-683 3F4F8-CA7 4-4BC0-870 0-9FD6EB13 F77E
The front foglights indicator lightilluminates whenthe
front foglights areon.(See ªFoglightswitchº (P.2-
19) .)
High beam indicator light
GUID-08 BB04C3-4AA4 -419A-95B6-834C32 C5DC45
The high beam indicator lightilluminates whenthe
headlight highbeam ison. The indicator turnsoffwhen
the low beam isselected. (SeeªHeadlight andturn
signal switchº (P.2-17) .)
Malfunction IndicatorLight(MIL)
GUID-BB02E D2E-DDF0-46AF-B93D -9E584F219399
CAUTION:
. Continuing vehicleoperation withoutproper
servicing ofthe engine control system could
lead topoor driveability, reducedfuelecon-
omy, anddamage tothe engine control
system, whichmayaffect thevehicle's
warranty coverage.
. Incorrect settingofthe engine control sys-
tem may lead tonon-compliance oflocal
and national emission lawsandregulations.
When theignition switchisin the ªONº position, the
Malfunction IndicatorLight(MIL) illuminates. After
starting theengine, theMIL turns off.This indicates
that theengine control system isoperational. MRA8DE
(forAustralia, NewZealand, Thailand
and Singapore) andHR16DE enginemodel(for
Thailand) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
If the MIL illuminates whiletheengine isrunning, itmay
indicate thattheengine control system isnot
functioning properlyandmay need servicing. Have
the vehicle checked, andifnecessary repaired,bya
NISSAN dealerpromptly .
If the MIL blinks whiletheengine isrunning, itmay
indicate apotential malfunction inthe emission control
system. Inthis case, theemission controlsystem may
not function properly andmay need servicing. Havethe
vehicle checked, andifnecessary repaired,bya
NISSAN dealerpromptly .
Precautions:
T o reduce oravoid possible damagetothe engine
control system whentheMIL blinks:
. Avoid driving atspeeds above70km/h (43MPH) .
. Avoid sudden acceleration ordeceleration.
. Avoid goingupsteep uphillgrades.
. Avoid carrying ortowing unnecessary loads.
MR16DDT ,MRA8DE (exceptforAustralia, New
Zealand, Thailand andSingapore) andHR16DE
engine model(except forThailand) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
If the MIL illuminates whiletheengine isrunning, itmay
indicate thattheengine control system isnot
functioning properlyandmay need servicing. Have
the vehicle checked, andifnecessary repaired,bya
NISSAN dealerpromptly .
Security indicator light(ifequipped)
GUID-00 84C499-A A4F-4EA2-8E2 3-977DC7902911
The security indicator lightblinks whentheignition
switch isin the ªLOCKº ,ªOFFº orªACCº position. This
function indicates theNATS (NISSAN Anti-Theft
System)* equipped onthe vehicle isoperational.
(* immobilizer)
If NA TS ismalfunctioning, thislight willremain onwhile
the ignition switchisin the ªONº position. (See
ªSecurity systemº(P.3-14) .)
Small lightindicator light
GUID-379 BC1A5-E2E 0-4DC5-B30 5-D5DD6A0BAB83
The small lightindicator lightilluminates whenthefront
clearance lights,instrument panellights, rearcombina-
tion lights andlicense platelights areon.The indicator
light turns offwhen
the
is turned off.
Sport mode indicator light(ifequipped)
GUID-88 26ABAE-D5 B3-4188-A0 7C-D617FC610A44
The SPORT modeindicator lightilluminates whenthe
SPORT modeisturned ªONº.(For theuse ofthe
SPORT modeswitch, seeªDriving withContinuously
V ariable Transmission (CVT)º(P.5-9) .)
T railer direction indicatorlight(if
equipped)
GUID-27D 975E4-042 E-4290-A113 -0A4CC2F5E6 CA
The light willilluminate whenever anadditional
electrical loadisdetected bythe direction indicator
system.
For additional information, seeªTrailer towing (for
Australia andNew Zealand)º (P.5-20) .
Instrume ntsand controls
2-15
&RQGLWLRQ


> (GLW   0RGHO &$@
GUID-218B1 7C5-422C-4FAE-99C4- AA3A74107 073
XENON HEADLIGHTS (ifequipped)
GUID-D5FEC 0EB-A466-47 42-B448-DEC77F659521
WARNING:
HIGH VOLTAGE
. When xenon headlights areon,they produce
a high voltage. To prevent anelectric shock,
never attempt tomodify ordisassemble.
Always haveyourxenon headlights checked
and/or replaced ataNISSAN dealer.
. Xenon headlights provideconsiderably
more lightthanconventional headlights.If
they arenot correctly aimed,theymight
temporarily blindanoncoming driverora
driver ahead ofyou and could cause a
serious accident. Immediately takeyour
vehicle toaNISSAN dealerandhave the
headlights adjustedcorrectly.
When thexenon headlights areinitially turnedon,their
brightness andcolor varyslightly .However, thecolor
and brightness willsoon stabilize.
The lifeofxenon headlights willbeshortened by
frequent on-offoperation. Itis generally desirable not
to turn offthe headlights forshort intervals.
If the xenon headlight bulbisclose toburning out,the
brightness willdrastically decrease,theheadlight will
start blinking, orthe color ofthe headlight willbecome
reddish. Ifone ormore ofthe above conditions appear,
contact aNISSAN dealer.
HEADLIGHT SWITCH
GUID-A8314 E0E-EC8C-4483-813A-B 5EB9E8CF C25
SIC3782
T ype A
SIC3783
T ype B
NISSAN recommends thatyouconsult thelocal
regulations concerning theuse oflights.
AUT Oposition (ifequipped)
GUID-2CEC3 A16-6D49-4F4 5-8731-D6F8C92C4A8F
When theignition switchisin the ªONº position and
the headlight switchisin the ªAUT Oºposition, the
headlights, frontclearance lights,instrument panel
lights, rearcombination lightsandother lights turnon
automatically dependingonthe brightness ofthe
surroundings.
The headlights willturn onautomatically attwilight orin
rainy weather (whenthewindshield wiperisoperated continuously)
.
When theignition switchisplaced inthe ªOFFº
position, thelights willturn offautomatically .
SAA1755
CAUTION:
Do not place anyobjects ontop ofthe sensor
*
1
. The sensor senses thebrightness leveland
controls theautolight function.Ifthe sensor is
covered, itreacts asifitis dark, andthe
headlights willilluminate.
position
GUID-F6 9BE745-A75 E-4F65-8BE6 -CB953D195A14
The
position turnsonthe front clearance,
instrument panel,tailand license plate
lights.
position
GUID-E8 7178D3-B8DB -448C-9D82-DD49492DD1E4
The
position turnsonthe headlights inaddition to
the other lights.
Instrume ntsand controls
2-17
HEADLIGHT
ANDTURN SIGNAL
SWIT CH
&RQGLWLRQ


> (GLW   0RGHO &$@
. When theIntelligent Key isleft inside thevehicle
. When theIntelligent Key isnot within the
operational range
. When anydoor isopen ornot closed securely
. When theIntelligent Key battery isdischarged
. When theignition switchisin the ªACCº orªONº
position
SP A2407
. Donot push thedoor handle request switchwith
the Intelligent Key held inyour hand asillustrated.
The close distance tothe door handle willcause
the Intelligent Key system tohave difficulty
recognizing thattheIntelligent Key isoutside the
vehicle.
. After locking thedoors usingthedoor handle
request switch,makesurethatthedoors have
been securely lockedbyoperating thedoor
handles.
. When locking thedoors usingthedoor handle
request switch,makesuretohave theIntelligent
K ey inyour possession beforeoperating thedoor
handle request switchtoprevent theIntelligent
K ey from being leftinthe vehicle.
. Thedoor handle request switchisoperational only
when theIntelligent Key has been detected bythe
Intelligent Key system. .
Donot pull thedoor handle beforepushing the
door handle request switch.Thedoor willbe
unlocked butwillnot open. Release thedoor
handle onceandpullitagain toopen the door.
SP A2710
SP A2545
When youcarry theIntelligent Key with you,youcan
lock orunlock alldoors bypushing thedoor handle
request switch(driver's orfront passenger's)
*
A
or
back doorrequest switch
*
B
within therange of
operation.
When youlock orunlock thedoors oropen theback
door, thehazard indicator willflash andtheoutside
chime willsound asaconfirmation. Fordetails, see
ªHazard indicator andoutside chimeoperationº (P.3- 13)
.
Locking doors
GUID-46 A34B66-C7EC -44ED-B6E4-34709BCF1E B0
1. Push theignition switchtothe ªOFFº position.
2. Carry theIntelligent Key with you.
3. Close alldoors.
4. Push thedoor handle request switch(driver's or
front passenger's)
*
A
or the back doorrequest
switch
*
B
.
5. Alldoors andtheback doorwillbelocked.
6. Operate doorhandles toconfirm thatthedoors
have been securely locked.
Lockout protection:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T o prevent theIntelligent Key from being accidentally
locked inthe vehicle, lockoutprotection isequipped
with theIntelligent Key system.
. When theIntelligent Key isleft inthe vehicle and
you trytolock thedoor using thedriver's inside
lock knob aftergetting outofthe vehicle, allthe
doors willunlock automatically andachime will
sound afterthedoor isclosed.
. When thedriver's sidedoor isopen andthe
Intelligent Key isinside thevehicle (including
luggage room),the doors cannot belocked using
the power doorlockswitch.
CAUTION:
The lockout protection maynotfunction under
the following conditions:
. When theIntelligent Keyisplaced ontop of
the instrument panel.
. When theIntelligent Keyisplaced onthe
cargo cover.
Pre-drivi ngchecks andadjustment s
3-9
&RQGLWLRQ


> (GLW   0RGHO &$@
3-14
Pre-driving checksandadjustments
GUID-C3B 71A2F-226 3-4BD0-AEF 3-1E0562880E42
Y our vehicle isequipped withNISSAN Anti-theft
System (NATS)*.
The security condition willbeshown bythe security
indicator light.
(* immobilizer)
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-036 EA410-EB76 -4EA4-B53B-6ABB43 43E2A9
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Security indicator light
GUID-769789 21-F8F5-4B9C-B81F-AAE 7B38642C 4
SIC2045
The security indicator lightislocated onthe meter
panel. Itindicates thestatus ofNA TS.
The light operates whenever theignition switchisin
the ªLOCKº ,ªOFFº orªACCº position. Thesecurity
indicator lightindicates thatthesecurity systems on
the vehicle areoperational.
If NA TS ismalfunctioning, thislight willremain onwhile
the ignition switchisin the ªONº position.
If the light remains onand/or theengine does
not start, contact aNISSAN dealerforNATS
service assoon aspossible. Besure tobring all
NA TS keys thatyouhave when visiting aNISSAN
dealer forservice.
GUID-84DFC8 CD-2300-48BD-B6F0-707623C404FF
WARNING:
. The hood mustbeclosed andlatched
securely beforedriving. Failuretodo so
could cause thehood tofly open andresult
in an accident.
. Never openthehood ifsteam orsmoke is
coming fromtheengine compartment to
avoid injury.
SECURITY SY STEM (ifequipped) HOOD
&RQGLWLRQ


> (GLW   0RGHO &$@
OPENING HOOD
GUID-E277 3E78-51C8-4 5B7-B6C8-B152AF80 8F99
JVP0058X
1. Pull thehood lockrelease handle
*
1
located
below theinstrument paneluntilthehood springs
up.
2. Locate thelever
*
2
in between thehood and
push thelever sideways withyour fingertips.
3. Raise thehood
*
3
.
4. Remove thesupport rod
*
4
and insert itinto the
slot
*
5
.
Hold thecoated parts
*
A
when removing or
resetting thesupport rod.Avoid directcontact
with themetal parts, asthey maybehot
immediately aftertheengine hasbeen stopped.
CL OSING HOOD
GUID-BF1C1 017-F13A-42F0-BA94-57D4BCDCA2 AC
1. While supporting thehood, return thesupport rod
to its original position.
2. Slowly lowerthehood toabout 20to30 cm (8to
12 in)above thehood lock,thenletitdrop.
3. Make sureitis securely latched.
CAUTION:
Before closing thehood, besure torelease the
support rodand store itin position. Otherwise,
the support rodwill bedamaged.
GUID-024 607D4-DAF 0-4850-925 1-C15DC895 5DAA
WARNING:
. Make suretheback doorhasbeen closed
securely toprevent itfrom opening while
driving.
. Donot drive withtheback dooropen. This
could allowdangerous exhaustgasestobe
drawn intothevehicle.
CAUTION:
. Before opening theback door, besure to
clear away snow, iceordust thatmay be
stuck tothe back door. Ifthe back dooris
opened whilematerials arestill stuck toit,it
may suddenly closeagain duetothe weight
of these materials.
. Always besure tofully open theback door. If
it is not fully opened, itmay suddenly shut.
. Beespecially carefulwhenopening theback
door instrong wind.Thedoor could be
caught byagust ofwind andmay close
suddenly.
JVP0059X
Pre-driving checksandadjustments
3-15
BACK
DOOR
&RQGLWLRQ


> (GLW   0RGHO &$@
4-6
Heater andairconditioner ,and audio system
GUID-D6D 9F812-CB78-4 FA4-ADF1 -EACDF07131 0D
WARNING:
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in the vehicle. Petsshould notbeleft alone
either. Theycould unknowingly activate
switches orcontrols andinadvertently be-
come involved inaserious accident and
injure themselves. Onhot, sunny days,
temperatures inaclosed vehicle could
quickly become highenough tocause se-
vere orpossibly fatalinjuries topeople or
animals.
. Donot use therecirculation modeforlong
periods asitmay cause theinterior airto
become staleandthewindows tofog up.
. Donot adjust theheating andaircondition-
ing controls whiledriving sothat fullatten-
tion may begiven tovehicle operation.
The heater andairconditioner operatewhenthe
engine isrunning. Theairblower willoperate evenif
the engine isturned offand theignition switchisin the
ªONº position.
NO TE:
. Odors frominside andoutside thevehicle
can build upinthe airconditioner unit.Odor
can enter thepassenger compartment
through thevents.
. When parking, setthe heater andaircondi-
tioner controls toturn offairrecirculation to
allow freshairinto thepassenger compart-
ment. Thisshould helpreduce odorsinside
the vehicle.
OPERA TINGTIPS(forautomatic aircondi-
tioner)
GUID-16D CCDD4-D6 9F-42A3-BE 18-3ABDA 970B57C
JVH0067X
JVH0063X
Left-Hand Drive(LHD) model*
*: The illustration isfor the Left-Hand Drive(LHD)
model. FortheRight-Hand Drive(RHD) model, the
layout willbethe opposite.
When theengine coolant temperature andoutside air
temperature arelow,the airflow from thefoot outlets
may notoperate. However, thisisnot amalfunction.
After thecoolant temperature warmsup,the airflow
from thefoot outlets willoperate normally.
The sensors
*
1
and
*
2
, located onthe instrument
panel, helpmaintain aconstant temperature. Donot put
anything onoraround thesensors.
HEA TER AND AIRCONDIT IONER
&RQGLWLRQ


> (GLW   0RGHO &$@
5-6
Starting anddriving
possible. (SeeªJump startingº (P.6-5) .)
Operating range
GUID-80A4 4E43-0A1B -4ABB-A7E6-B D571734D53 C
SSD0436
The Intelligent Key can only beused forstarting the
engine whentheIntelligent Key iswithin thespecified
operating range
*
1
.
When theIntelligent Key battery isalmost discharged
or strong radiowaves arepresent neartheoperating
location, theIntelligent Key system's operating range
becomes narrowerandmay notfunction properly.
If the Intelligent Key iswithin theoperating range,itis
possible foranyone, evensomeone whodoes notcarry
the Intelligent Key ,to push theignition switchtostart
the engine.
. The luggage roomareaisnot included inthe
operating range,buttheIntelligent Keymay
function.
. Ifthe Intelligent Key isplaced onthe instrument
panel, insidetheglove box,door pocket orthe
corner ofthe interior compartment, theIntelligent
K ey may notfunction.
. Ifthe Intelligent Key isplaced nearthedoor or
window outsidethevehicle, theIntelligent Key
may function.
Continuously Variable Transmission (CVT)
model
GUID-59131E CE-A47C-4849-A212-5FF7051D7462
The ignition lockisdesigned sothat theignition switch
cannot beswitched tothe ªLOCKº position untilthe
shift lever ismoved tothe ªPº (Park) position. When
pushing theignition switchtothe ªOFFº position, make
sure theshift lever isin the ªPº (Park) position.
When theignition switchcannot beswitched tothe
ªL OCKº position:
1. Move theshift lever tothe ªPº (Park) position.
2. Push theignition switchtothe ªOFFº position.
3. Open thedoor. Theignition switchwillchange to
the ªLOCKº position.
If the ignition switchisswitched tothe ªLOCKº
position, theshift lever cannot bemoved fromtheªPº
(Park) position. Theshift lever canbemoved ifthe
ignition switchisin the ªONº position withthefoot
brake depressed.
STEERING LOCK
GUID-E05 63F6E-C5FD- 4C6A-83D7-9D 4CAE048AA9
The ignition switchisequipped withananti-theft
steering lockdevice.
T o lock steering wheel
GUID-199 0FCB9-1E4 5-4067-918 5-B54F6548 9D5D
1. Push theignition switchtothe ªOFFº position
where theignition switchposition indicator willnot
illuminate.
2. Open orclose thedoor. Theignition switchturns
to the ªLOCKº position.
3. Turn thesteering wheel1/6ofaturn tothe right or
left from thestraight upposition.
T o unlock steering wheel
GUID-836 CAB5B-2A97-4D4D-B A13-0D61A7DEAB3B
Push theignition switch,andthesteering wheelwillbe
automatically unlocked.
CAUTION:
. Ifthe battery ofthe vehicle isdischarged, the
push-button ignitionswitchcannot be
switched fromtheªLOCKº position.
. Ifthe ignition switchposition doesnot
change fromtheªLOCKº position, pushthe
ignition switchagainwhilerotating the
steering wheelslightly tothe right andleft.
IGNITION SWITCHPOSITIONS
GUID-787 88975-EF20-4EEC-9 BD9-C8FD 1F38789B
SSD0859
When theignition switchispushed withoutdepressing
the brake pedal (Continuously Variable Transmission
model) orthe clutch pedal(Manual Transmission
model) ,the ignition switchposition willchange as
follows:
. Push oncetochange toªACCº .
. Push twotimes tochange toªONº .
. Push three times tochange toªOFFº .
&RQGLWLRQ