2015 NISSAN MAXIMA light

Black plate (89,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
NRG00851.Highlight [Move Location] and push
.
INFO:
The screen for adjusting the location also
changes by touching the map screen dis-
played on the right side of the screen.
NRG00862. Adjust the location by moving the cross pointer across the map and push
. The location of the destination
is modified.
INFO:
. The map scale can be changed by pushing
or (if so
equipped) . The map scale can also be
changed by touching the scale icon.
. The same screen as when [Move Location]
is touched can be displayed with the
following operations:
— Touching the map screen.
— Pushing the directional buttons except
up/down buttons (multi-function control-
ler with directional buttons).
— Pushing the slide switch except upward/ downward (multi-function controller with-
out directional buttons).
STORING LOCATIONGUID-2C0D9103-16C4-4B17-8344-FD9DDDFAEA38A searched location can be stored in the
Address Book. Then it can be easily retrieved
and set as a destination (or waypoint).
NRG00871. Highlight [Store Location] and push
.
NRG00882. The location is stored in the Address Book.
The corresponding icon is displayed at the
set location on the map.
VIEWING INFORMATION ABOUT
SEARCHED LOCATION
GUID-9D0F6DB1-9A69-4BAB-8D5B-154EBC40AC56Information (street address and phone number)
about places stored in the map data can be
displayed.
Route guidance5-5

Black plate (93,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
GUIDANCE SCREEN SETTINGSGUID-5906E02A-C1F4-4496-988E-D7B293738590The guidance screen can be displayed at all
times even when the vehicle is located away
from the guide point. The screen to be displayed
can be set.
Split screen settingsGUID-41170BA2-E8EE-4109-BED4-AFBC9756B80FThe display setting on the left-hand side screen
shown during route guidance can be changed.
NRG00141. Push while the current location
map screen is displayed.
2. Highlight [Map View ] and push .
NRG0015
3.Highlight [View Settings] and push
.
4. Highlight the preferred screen and push . The indicator of the selected
screen illuminates.
Intersection:
GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E
NRG0011The map screen and the enlarged intersection
view can be displayed at the same time.
Push

Black plate (94,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
5-10Route guidance
Fuel Economy:GUID-C7C06D28-6C87-4C20-A441-213FED35BE0E
NRG0017The current fuel consumption rate, average fuel
consumption rate, instantaneous fuel consump-
tion rate and distance to empty can be displayed
on the map screen. An enlarged intersection
view is automatically displayed when the vehicle
approaches the guide point.
Push

Black plate (95,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
NRG00744. Highlight [Show all Freeway Exits on Route]or [Auto. Show Turn List on Freeway] and
push . The indicator illuminates
when the item is set.
5. Push

Black plate (96,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
5-12Route guidance
NRG00794. The waypoint is set, and the route search isperformed.
“Procedures after setting destination”
(page 5-2)
GUID-EE9980BE-5F52-424F-80D9-7D2C6BD0160D
WARNING
Always stop the vehicle in a safe
location before modifying the route
conditions.
Modifying the route conditions while
driving may cause an accident.
During route guidance, the route conditions can
be modified and the route information can be
confirmed. Set route conditions according to
personal preference.
NRG0019BASIC OPERATIONGUID-94188832-FAB9-427A-8DBB-AC861A9FF13C1. Push .
2. Highlight the preferred setting item and
push .
3. Push

Black plate (97,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
.[Detour]:
To detour from the suggested route, calcu-
late a route detouring for a specified
distance.
“Setting detour route” (page 5-22)
. [Traffic Detour]:
Manually search for an alternative detour
route taking the traffic information into
consideration.
“Searching for detour route taking
traffic information into consideration”
(page 5-22)
. [Route Settings]:
Change the route calculation conditions
anywhere along the route.
“Setting conditions for route calcula-
tion” (page 5-23)
CANCELING/REACTIVATING ROUTEGUID-B9B85A76-9055-41AF-8C96-1CA9A71D696BA route that is already set can be canceled at
any time. If a route is canceled, the destination
and waypoints are also deleted.
It is also possible to reactivate a canceled route.
Canceling routeGUID-E39C57A3-89AF-41FC-AE6D-5FAA56708F14
NRG00191. Push .
2. Highlight [Cancel Route] and push
.
NRG00203. A confirmation message is displayed.
Highlight [Yes] and push .
The route is canceledd along with the
destination and waypoints.
INFO:
Canceling a route does not delete destination
and waypoint information completely.
“Delete destination” (page 4-20)
Voice command
1. Push >located on the steering
wheel switch.
2. After the tone sounds, speak a command. To cancel a route:
“Cancel Route” (Alternate Command Mode)
Reactivating routeGUID-B2D165BD-364D-4E26-A755-078D60243FED
NRG00211. Push .
2. Highlight [Resume Route] and push
.
Route guidance5-13

Black plate (98,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
5-14Route guidance
NRG00223. A confirmation message is displayed. High-light [Yes] and push . The can-
celed route is reactivated.
INFO:
If a new route is set, the canceled route cannot
be reactivated.
EDITING ROUTEGUID-C6041E77-4F51-4560-8463-40EBF97B1C1F
NRG00231. Push .
2. Highlight [Edit/Add to Route] and push
. 3. Highlight the preferred condition and push
.
4. Push to return to the previous
screen. Push

Black plate (99,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
NRG00251. Push.
2. Highlight [Edit/Add to Route] and push
.
3. Highlight [Add Destination] or [Add Way- point] and push .
If [Add Destination] is selected, the current
destination changes to a waypoint.
NRG00264. Set a destination or waypoint. The method of searching for a destination or waypoint is the
same as the one for a destination.
“4. Setting destination”
NRG00275. The selected location is displayed at thecenter of the map. Highlight [Add to Route]
after confirming the location and push
.
INFO:
Even after setting a destination/waypoint,
the destination/waypoint location can be
adjusted, the route can be stored, etc.
“Editing/deleting destination or way-
point” (page 5-15)
NRG0028
6. Return to the Edit Route screen. Set the route conditions as necessary.
7. Highlight [Calculate] and push .
The system will recalculate the routes. After
the route search is completed, the display
will automatically return to the present
location screen.
INFO:
. The prior route is automatically deleted.
. Added waypoints and search conditions will
not be taken into consideration for the route
calculation until [Calculate] is highlighted
and is pushed.
Editing/deleting destination or waypointGUID-A18D5386-1AD1-47A1-9C97-AE9C567FFFBEThe destination or waypoint that is already set
can be modified or deleted.
If a location is modified or deleted when a
suggested route is already set, the prior
suggested route will be recalculated accord-
ingly.
Route guidance5-15