2015 NISSAN JUKE ECU


> (GLW   0RGHO )'@
2-16
Instrument sand controls
WARNING
. Ifthe light does notilluminate with
the ignition switchplaced inthe ON
position, havethevehicle checked
by aNISSAN dealerassoon as
possible.
. Ifthe light illuminates whiledriving,
avoid sudden steering maneuvers or
abrupt braking, reducevehicle
speed, pulloffthe road toasafe
location andstop thevehicle as
soon aspossible. Drivingwithun-
der-inflated tiresmaypermanently
damage thetires andincrease the
likelihood oftire failure. Serious
vehicle damage couldoccurand
may lead toan accident andcould
result inserious personal injury.
Check thetire pressure forallfour
tires. Adjust thetire pressure tothe
recommended COLDtirepressure
shown onthe Tire andLoading
Information labeltoturn thelow
tire pressure warninglightOFF.If
the light stillilluminates whiledriv-
ing after adjusting thetire pressure,
a tire may beflat. Ifyou have aflat
tire, replace itwith aspare tireas soon
aspossible.
. When aspare tireismounted ora
wheel isreplaced, theTPMS willnot
function andthelow tirepressure
warning lightwillflash forapproxi-
mately 1minute. Thelight will
remain onafter 1minute. Contact
your NISSAN dealerassoon as
possible fortire replacement and/
or system resetting.
. Replacing tireswiththose notori-
ginally specified byNISSAN could
affect theproper operation ofthe
TPMS.
CAUTION
. The TPMS isnot asubstitute forthe
regular tirepressure check.Besure
to check thetire pressure regularly.
. Ifthe vehicle isbeing driven at
speeds ofless than 16MPH (25
km/h) ,the TPMS maynotoperate
correctly.
. Besure toinstall thespecified size
of tires tothe four wheels correctly.
Low washer fluidwarning light
(Canada only)
GUID-ADABB 354-FD0A-4635-ABE1-7 FD833E3E73 4
This light illuminates whenthewasher fluidisat
a low level. Addwasher fluidasnecessary .(See
ªWindow washerfluidº(P.8-12) .)
P position selecting warninglight
GUID-2CE9 58E5-DAA1-48FB-A4F0-B 392F12FCD77
The warning lightblinks inred when theignition
switch ispushed tostop theengine withthe
shift lever inany position excepttheP(Park)
position.
If this warning appears, movetheshift lever to
the P(Park) position orpush theignition switch
to the ON position.
An inside warning chimewillalso sound.
See ªIntelligent Key systemº (P.3-6) .
Seat beltwarning light
GUID-91E 8D2F7-3908 -4392-874C- F4665FD344E7
The light andchime remind youtofasten seat
belts. Thelight illuminates whenevertheignition
switch isplaced inthe ON position, andwill
remain illuminated untilthedriver's seatbeltis
fastened. Atthe same time,thechime willsound
for about 6seconds unlessthedriver's seatbelt
is securely fastened.
The seat beltwarning lightforthe front
passenger willilluminate ifthe seat beltisnot
&RQGLWLRQ


> (GLW   0RGHO )'@
Operation:
GUID-F 83C168B-173D -4313-B631-F712588C04 63
The malfunction indicatorlightwillcome onin
one oftwo ways:
. Malfunction indicatorlightilluminated steady
Ð An emission controlsystem and/orCVT
malfunction hasbeen detected. Checkthe
fuel-filler capifthe LOOSE FUELCAP
warning message isdisplayed onthe twin
trip odometer. Ifthe fuel-filler capisloose or
missing, tightenorinstall thecap and
continue todrive thevehicle. The
light
should turnoffafter afew driving trips.Ifthe
light does notturn offafter afew driving
trips, havethevehicle inspected bya
NISSAN dealer.You do not need tohave
your vehicle towedtothe dealer.
. Malfunction indicatorlightblinking ÐAn
engine misfirehasbeen detected whichmay
damage theemission controlsystem.
T o reduce oravoid emission controlsystem
damage:
1) Do not drive atspeeds above45MPH
(72 km/h) .
2) Avoid hardacceleration ordeceleration.
3) Avoid steepuphillgrades.
4) Ifpossible, reducetheamount ofcargo
being hauled ortowed.
The malfunction indicatorlightmaystop
blinking andremain on. Have
thevehicle inspected byaNISSAN
dealer. You do not need tohave yourvehicle
towed tothe dealer.
CAUTION
Continued vehicleoperation without
having theemission controlsystem
and/or CVTsystem checked andre-
paired asnecessary couldleadtopoor
driveability, reducedfueleconomy, and
possible damagetothe emission con-
trol system.
Security indicator light
GUID-5B BF01E2-313 5-4B2A-BA68-00E15944E42A
The light blinks whentheignition switchisin the
ACC, OFForLOCK position. Thisfunction
indicates thesecurity systemequipped onthe
vehicle isoperational.
If the security systemismalfunctioning, thislight
will remain onwhile theignition switchisin the
ON position. Foradditional information, see
ªSecurity systemsº(P.2-29) .
T urn signal/hazard indicatorlights
GUID-93 8BCB58-C7D 0-4656-B2E2-A3F2D5 C472C5
The light flashes whentheturn signal switch
lever orhazard switchisturned on.
V ehicle Dynamic Control(VDC)off
indicator light
GUID-BB D2CFDF-748 6-4847-A2BC-6E1274 44B584
When theignition switchisin the ªONº position,
the Vehicle Dynamic Control(VDC)offindicator
light illuminates andthen turns off.
The light comes onwhen theVehicle Dynamic
Control (VDC)offswitch ispushed toOFF .This
indicates thattheVDC system andtraction
control system arenot operating.
AUDIBLE REMINDERS
GUID-429 04A1A-6A75 -4B8C-8F34-6D9818D 98A82
K ey reminder chime
GUID-32 BD73EC-E7A4 -4435-A048-B7769B71 7D08
A chime willsound ifthe driver sidedoor is
opened whiletheignition switchispushed to
the ACC position.
Make suretheignition switchispushed tothe
OFF position, andtake theIntelligent Key with
you when leaving thevehicle.
Instrume ntsand controls
2-19
&RQGLWLRQ


> (GLW   0RGHO )'@
2-20
Instrument sand controls
Light reminder chime
GUID-721 68721-DFA8-448A-9 61A-A3FACAB0A 8E3
The light reminder chimewillsound whenthe
driver sidedoor isopened withtheheadlight
switch inthe
or
position, andthe
ignition switchisin the ACC, OFForLOCK
position.
T urn thelight switch offwhen youleave the
vehicle.
Brake padwear warning
GUID-EF 2EB7E0-B2 27-4E63-9D C8-B730CC1 3FB1B
The disc brake padshaveaudible wearwarn-
ings. When abrake padrequires replacement, it
will make ahigh pitched scraping soundwhen
the vehicle isin motion. Thisscraping soundwill
first occur onlywhen thebrake pedalis
depressed. Aftermore wearofthe brake pad,
the sound willalways beheard evenifthe brake
pedal isnot depressed. Havethebrakes
checked assoon aspossible ifthe warning
sound isheard.
Parking brakereminder chime
GUID-885 3279F-1AD 6-47C7-B9A8 -09A67EC2B7BE
The parking brakereminder chimewillsound if
the vehicle isdriven atmore than4MPH (7
km/h) withtheparking brakeapplied. Stopthe
vehicle andrelease theparking brake.
Seat beltwarning chime
GUID-F9 E8997E-7A8 8-4D30-B477- C791A79F8575
The seat beltwarning chimewillsound forabout
6 seconds unlessthedriver's seatbeltis
securely fastened.
&RQGLWLRQ


> (GLW   0RGHO )'@
NO TE:
When theclock isnot set, theECO
information (dailyandweekly) cannotbe
used.
Reset atStart
GUID-F8522 59B-B08A-4BC8-BAC5-9ACC5A687 EEB
Records ofup tothe past 4times ofeach timeof
ignition switchONfuelconsumption canbe
shown onthe display .
Manual Reset
GUID-B6A6 2823-AFB2-4ADC-A65B -72B63B1719C0
Records ofup tothe past 4times ofresetting
fuel consumption canbeshown onthe display .
The displayed ECOINFO canbereset by
pushing theENTER buttonforlonger than1
second.
GUID-E521 ED90-7BA2-4 FC3-91C7-F35E3C88D AF5
JVI1163X
Y our vehicle hastwo types ofsecurity systems,
as follows:
. Vehicle security system
. NISSAN Vehicle Immobilizer System
The security condition willbeshown bythe
security indicator light.
VEHICLE SECURITY SYSTEM
GUID-B38A 9882-E3CB-4 884-A546-D9C91260 263B
The vehicle security systemprovides visualand
audio alarmsignals ifsomeone opensthedoors,
or lift gate when thesystem isarmed. Itis not,
however, amotion detection typesystem that
activates whenavehicle ismoved orwhen a
vibration occurs.
The system helpsdetervehicle theftbutcannot prevent
it,nor can itprevent thetheft ofinterior
or exterior vehiclecomponents inall situations.
Always secureyourvehicle evenifparking fora
brief period. Neverleaveyourkeys inthe vehicle,
and always lockitwhen unattended. Beaware
of your surroundings, andpark insecure, well-lit
areas whenever possible.
Many devices offeringadditional protection,
such ascomponent locks,identification markers,
and tracking systems, areavailable atauto
supply storesandspecialty shops.Your
NISSAN dealermayalso offer such equipment.
Check withyour insurance companytosee if
you may beeligible fordiscounts forvarious
theft protection features.
Instrume ntsand controls
2-29
SECURITY SY STEMS
&RQGLWLRQ


> (GLW   0RGHO )'@
2-30
Instrument sand controls
SIC2045
How toarm thevehicle security system
GUID-0B0D5 4E3-2D2E-4E66-84C2-DB 089A802C9C
1. Close allwindows.
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe OFF position
and remove theIntelligent Key from the
vehicle.
3. Close alldoors. Lockalldoors. Thedoors
can belocked with:
.
the L OCK
button onthe Intelligent
K ey
.
any request switch
.
the power doorlockswitch
.
the mechanical key
4. Confirm thatthesecurity indicator light
illuminates. Thesecurity indicator lightstays
on for about 30seconds. Thevehicle
security systemisnow pre-armed. After
about 30seconds thevehicle security
system automatically shiftsintothearmed
phase. Thesecurity lightbegins toflash
once every approximately 3seconds. If,
during this30-second pre-armtimeperiod,
the door isunlocked, orthe ignition switchis
placed inthe ACC orON position, the
system willnotarm.
Even when thedriver and/or passengers
are inthe vehicle, thesystem willactivate
with alldoors locked withtheignition
switch inthe LOCK position. Whenplacing
the ignition switchinthe ACC orON
position, thesystem willbereleased.
V ehicle security systemactivation
GUID-586 0D76E-23D 8-4381-99F0 -0DD8252DADA1
The vehicle security systemwillgive thefollow-
ing alarm:
. The headlights blinkandthehorn sounds
intermittently .
. The alarm automatically turnsoffafter
approximately 50seconds. However, the
alarm reactivates ifthe vehicle istampered
with again. The
alarm isactivated by:
. Unlocking thedoor without usingthe
Intelligent Key ,the request switchorthe
key .(Even ifthe door isopened byreleasing
the door inside lockknob, thealarm will
activate.)
How tostop anactivated alarm
GUID-C58 BB668-0D8A- 41CA-8C30-D900891AB B1A
The alarm willstop byunlocking adoor by
pushing theUNL
OCK
button onthe
Intelligent Key ,pushing therequest switchor
using thekey.The alarm willnotstop ifthe
ignition switchisplaced inthe ACC orON
position.
If the system doesnotoperate asde-
scribed above,haveitchecked bya
NISSAN dealer.
NISSAN VEHICLE IMMOBILIZE RSYS-
TEM
GUID-82475E C2-840C-467B-A31D-9 7F570513B2F
The NISSAN Vehicle Immobilizer Systemwillnot
allow theengine tostart without theuse ofthe
registered key.
If the engine failstostart using theregistered
key ,it may bedue tointerference causedby
another registered key,an automated tollroad
device orautomated paymentdeviceonthe key
ring. Restart theengine usingthefollowing
procedures:
&RQGLWLRQ


> (GLW   0RGHO )'@
1. Leave theignition switchinthe ON position
for approximately 5seconds.
2. Place theignition switchinthe OFF or
L OCK position andwait approximately 10
seconds.
3. Repeat step1and 2again.
4. Restart theengine whileholding thedevice
(which mayhave caused theinterference)
separate fromtheregistered key.
If this procedure allowstheengine tostart,
NISSAN recommends placingtheregis-
tered keyonaseparate keyring toavoid
interference fromother devices.
Statement relatedtosection 15ofFCC
rules forNISSAN Vehicle Immobilizer
System (CONTASSY-BCM .ANT ASSY-
IMMOBILISER)
FCC Notice:
For USA:
This device complies withPart15ofthe
FCC Rules. Operation issubject tothe
following twoconditions: (1)This device
may notcause harmful interference, and
(2) this device mustaccept anyinterfer-
ence received, including interference that
may cause undesired operation.
Note: Changes ormodifications notex-
pressly approved bythe party responsible for
compliance couldvoidtheuser's
authority tooperate theequipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Opera-
tion issubject tothe following twocondi-
tions: (1)this device maynotcause
interference, and(2)this device must
accept anyinterference, includinginterfer-
ence thatmay cause undesired operation
of the device.
SIC2045
Security indicator light
GUID-919 36668-A20A-4 8BD-8CB2-340577FB611D
The security indicator lightislocated onthe
meter panel. Itindicates thestatus ofthe
NISSAN Vehicle Immobilizer System.
The light blinks whenever theignition switchisin
the LOCK, OFForACC position. Thisfunction
indicates thesecurity systems equipped onthe
vehicle areoperational.
If the NISSAN Vehicle Immobilizer Systemis
malfunctioning, thislight willremain onwhile the
ignition switchisin the ON position.
If the light stillremains onand/or the
engine willnotstart, seeaNISSAN dealer
for NISSAN Vehicle Immobilizer System
Instrume ntsand controls
2-31
&RQGLWLRQ

 
> (GLW   0RGHO )'@
GUID-11FF EB74-6D4E -4717-B00A-F5FBAB2 E5908
CUP HOLDERS
GUID-FC8FAFBC-BCD6-43B2 -98A8-26203EF5F9DB
CAUTION
. Avoid abrupt starting andbraking
when thecup holder isbeing used
to prevent spillingthedrink. Ifthe
liquid ishot, itcan scald youoryour
passenger.
. Use only softcups inthe cup holder.
Hard objects caninjure youinan
accident.
SIC4527
Center console
SIC4528
Door (front andrear)
Soft bottle holders
GUID-1A4F BEC5-2F7E-4330-AFD C-3E00F421B6AB
CAUTION
. Do not use bottle holder forany
other objects thatcould bethrown
about inthe vehicle andpossibly
injure people duringsudden braking
or an accident.
. Do not use bottle holder foropen
liquid containers.
Instrume ntsand controls
2-43
ST ORAGE
&RQGLWLRQ

 
> (GLW   0RGHO )'@
CARGO COVER(ifso equipped)
GUID-B2FCE 0EE-8505-47 10-86C2-50A0D5588C3 3
WARNING
. Never putanything onthe cargo
cover, nomatter howsmall. Any
object onitcould cause aninjury
in an accident orsudden stop.
. Do not leave thecargo coverinthe
vehicle withitdisengaged fromthe
holder.
. The child restraint toptether strap
may bedamaged bycontact with
the cargo coveroritems inthe
luggage area.Remove thecargo
cover fromthevehicle orsecure it
and anyluggage. Your child could
be seriously injuredorkilled ina
collision ifthe top tether strapis
damaged.
The cargo coverkeeps theluggage compart-
ment contents hiddenfromthe
outside.
SIC4584
T o install thecargo cover:
1. Open theliftgate.
2. Fixthe clip
*
A
on the liftgate lower garnish.
3. Fixthe clip
*
B
on the liftgate sidegarnish.
4. Hook therope onthe clip located onthe lift
gate sidegarnish. T
o remove thecargo cover:
1. Open theliftgate.
2. Remove therope fromtheliftgate side
garnish.
3. Remove theclip
*
B
from theliftgate side
garnish.
4. Remove theclip
*
A
from theliftgate lower
garnish.
Instrume ntsand controls
2-45
&RQGLWLRQ