2015 NISSAN JUKE warning lights


> (GLW   0RGHO )'@
5-12
Starting anddriving
SSD0860
INTELLIGEN TKEY BATTER YDIS-
CHARGE
GUID-B0D19 56A-5575-42 6F-A28A-6ED 797C76123
If the battery ofthe Intelligent Key isdischarged,
or environmental conditionsinterferewiththe
Intelligent Key operation, starttheengine
according tothe following procedure:
1. Move theshift lever tothe P(Park) position
(for Continuously Variable Transmission
models) orthe shift lever tothe N(Neutral)
position (formanual transmission models).
2. Firmly applythefoot brake.
3. Touch theignition switchwiththeIntelligent
K ey as illustrated. (Achime willsound.) 4.
Push theignition switchwhiledepressing
the brake pedalwithin 10seconds afterthe
chime sounds. Theengine willstart.
After step3is performed, whentheignition
switch ispushed withoutdepressing thebrake
pedal, theignition switchposition willchange to
ACC.
NO TE:
. When theignition switchispushed to
the ACC orON position orthe engine is
started bythe above procedures, the
Intelligent Keysystem warning light
may blink inyellow evenifthe Intelli-
gent Keyisinside thevehicle. Thisis
not amalfunction. To stop thewarning
light from blinking, touchtheignition
switch withtheIntelligent Keyagain.
. Ifthe Intelligent Keysystem warning
light inthe meter isblinking ingreen,
replace thebattery assoon aspossible.
(See ªIntelligent Keybattery replace-
mentº (P.8-23) .)
GUID-99D A8E7B-99CA -40D0-B1AA-E 547E7042524
. Make surethearea around thevehicle is
clear.
. Check fluidlevels suchasengine oil,cool-
ant, brake fluid,andwindow washerfluidas
frequently aspossible, oratleast whenever
you refuel.
. Check thatallwindows andlights areclean.
. Visually inspecttiresfortheir appearance
and condition. Alsocheck tiresforproper
inflation.
. Lock alldoors.
. Position seatandadjust headrestraints.
. Adjust insideandoutside mirrors.
. Fasten seatbelts andaskallpassengers to
do likewise.
. Check theoperation ofwarning lightswhen
the ignition switchisplaced inthe ON
position. (SeeªWarning/indicator lightsand
audible remindersº (P.2-12) .)
BEFORE STARTING THEENGINE
&RQGLWLRQ


> (GLW   0RGHO )'@
5-18
Starting anddriving
back tothe ONposition. Thevehicle
should returntoits normal operating
condition. Ifitdoes notreturn toits normal
operating condition, haveaNISSAN dealer
check thetransmission andrepair ifne-
cessary.
WARNING
When thehigh fluid temperature pro-
tection modeorfail-safe operation
occurs, vehiclespeedmaybegradually
reduced. Thereduced speedmaybe
lower thanother traffic,which could
increase thechance ofacollision. Be
especially carefulwhendriving. Ifne-
cessary, pulltothe side ofthe road ata
safe place andallow thetransmission
to return tonormal operation, orhave it
repaired if
necessary.
SSD1142
Shift lockrelease
GUID-39E4 740A-3513-44A0-A3 06-744DB1802606
If the battery charge islow ordischarged, the
shift lever maynotbemoved fromtheP(Park)
position evenwiththebrake pedal depressed
and theshift lever button pushed.
T o move theshift lever, perform thefollowing
procedure:
1. Place theignition switchinthe OFF or
L OCK position.
2. Apply theparking brake.
3. Remove theshift lockrelease cover
*
A
using asuitable tool. 4.
Push down theshift lockrelease usinga
suitable tool.
5. Push theshift lever button andmove the
shift lever tothe N(Neutral) positionwhile
holding downtheshift lockrelease.
Place theignition switchinthe ON position. The
vehicle maybemoved tothe desired location.
Replace theremoved shiftlockrelease cover
after theoperation.
If the battery isdischarged completely,the
steering wheelcannot beunlocked. Donot
move thevehicle withthesteering wheellocked.
If the shift lever cannot bemoved outofthe P
(Park) position, haveaNISSAN dealercheckthe
CVT system assoon aspossible.
WARNING
If the shift lever cannot bemoved from
the P(Park) position whiletheengine is
running andthebrake pedalisde-
pressed, thestop lights maynotwork.
Malfunctioning stoplights couldcause
an accident injuringyourself and
others.
&RQGLWLRQ


> (GLW   0RGHO )'@
GUID-A 7F7F37C-BB 96-45E4-9A88-BFC066 7354EF
. Keep your engine tunedup.
. Follow therecommended scheduledmain-
tenance.
. Keep thetires inflated tothe correct
pressure. Lowtirepressure increases tire
wear andlowers fueleconomy .
. Keep thewheels incorrect alignment.
Improper alignment increasestirewear and
lowers fueleconomy .
. Use therecommended viscosityengineoil.
(See ªEngine oiland oilfilter recommenda-
tionº (P.9-7) .)
GUID-63E 39624-CE54 -4BBF-8A6D-1FF62766 9DD9
WARNING
. For AWD equipped vehicles,donot
attempt toraise twowheels offthe
ground andshift thetransmission to
any drive orreverse position with
the engine running. Doingsomay
result indrivetrain damageorun-
expected vehiclemovement which
could result inserious vehicleda-
mage orpersonal injury.
. Do not attempt totest anAWD
equipped vehicleona2-wheel dy-
namometer (suchasthe dynam-
ometers usedbysome states for
emissions testing)orsimilar equip-
ment evenifthe other twowheels
are raised offthe ground. Makesure
that youinform thetest facility
personnel thatyour vehicle is
equipped withAWD before itis
placed onadynamometer. Using
the wrong testequipment mayre-
sult indrivetrain damageorunex -
pected vehicle movement which
could result inserious vehicleda-
mage orpersonal
injury.
SSD1129
AWD mode switch
ALL -WHEEL DRIVE(AWD) MODE
SWIT CHOPERA TIONS
GUID-D1E 25B84-9B31 -4A3A-B30F-1ACF488 15006
The All-Wheel Drive(AWD) system isused to
select the2WD (Two-Wheel Drive),A WD-V or
A WD mode depending onthe driving condi-
tions.
The AWD mode indicator lights(
(green) ,
) are located inthe instrument panel.
The AWD mode indicator lights
(green)
illuminate whentheignition switchisplaced in
the ON position. Theindicator lightsturnoff
within 1second.
The AWD mode indicator lightswilldisplay the
mode selected bythe AWD mode switch while
Starting anddriving
5-29
INCREASING FUELECONOMY ALL
-WHEEL DRIVE(AWD) (ifso
equipped)
&RQGLWLRQ


> (GLW   0RGHO )'@
5-30
Starting anddriving
engine isrunning.
If the AWD warning light
(yellow) illumi-
nates, theAWD mode indicator lightswillturn
off.
Push theAWD mode switch, located onthe
instrument panel,toselect 2WD,AWD-V or
A WD.
A WD-V :Push theAWD mode switch tothe
neutral (AWD-V) position. TheAll-Wheel Drive
(A WD) AWD-V indicator light
in the meter
illuminates.
2WD: PushtheAWD mode switch tothe 2WD
position.
A WD: Push theAWD mode switch tothe AWD
position. TheAWD indicator light
(green) in
the meter illuminates.
A WD mode Wheelsdriven A
WD mode indicator light
(
,
(green)) Use
conditions
2WD Front
wheels:
The wheel drivemode isin
T wo-Wheel Drive(2WD)
when driving onanormal road. T
urns off For
driving ondry,
paved roads
A WD-V Distribution
oftorque tothe
front andrear wheels changes
automatically [ratio;100:0
(2WD) ?50 :50 (AWD)] and
distribution oftorque between
left and right wheel ofrear
wheels changes automatically
depending onroad conditions
encountered [ratio;100:0
(2WD) ?50 :50 (AWD)]. Illuminates
For driving onpaved or
slippery roads
A WD Distribution
oftorque tothe
front andrear wheels changes
automatically [ratio;100:0
(2WD) ?50 :50 (AWD)] and
the distribution oftorque be-
tween theleftand right rear
wheels changes automatically
depending onthe slippery
road conditions encountered. Illuminates
(green)
For driving onslippery
roads
&RQGLWLRQ


> (GLW   0RGHO )'@
A WD shift tips
GUID-C35 72DD7-028 5-47BA-B5AE -F412F28BC6E1
. Ifthe AWD mode switch isoperated while
making aturn, accelerating ordecelerating,
or ifthe ignition switchisturned offwhile in
the AWD-V orAWD mode, youmay feela
jolt. This isnormal.
. The oiltemperature ofpower trainparts will
increase ifthe vehicle iscontinuously
operated underconditions wherethediffer-
ence inrotation between thefront andrear
wheels islarge (wheel slip),such aswhen
driving thevehicle onrough roadsthrough
sand ormud orwhen freeing astuck vehicle.
In these cases, theAWD warning lightblinks
rapidly andtheAWD mode changes tothe
2WD mode toprotect thepower trainparts.
If you stop driving withtheengine idlingand
wait until thewarning lightstops blinking,
the AWD returns tothe AWD-V orAWD
mode.
. Brake distance inthe AWD mode isthe
same as2WD.
CAUTION
. Do not start theengine withthe
AWD mode switch inany mode in
the following cases: Ð
when thevehicle isplaced ona
free-roller orjacking upthe
vehicle withthefront tires
raised andtherear tires onthe
ground.
Ð when towing thevehicle withthe
rear tires raised fromthe
ground.
. Operate theAWD mode switch only
when driving straight. Donot oper-
ate the AWD mode switch when
making aturn orbacking up.
. Do not operate theAWD mode
switch withthefront wheel spin-
ning.
. Engine idlingspeed ishigh while
warming upthe engine. Beespe-
cially careful whenstarting ordriv-
ing onslippery surfaces withthe
AWD mode switch setinthe AWD-V
or AWD mode.
SSD0336-D
A WD WARNING LIGHT
GUID-00 AD0D7B-4E5 0-437F-8A9D-C89C8757 711F
The AWD warning lightlocated inthe instrument
panel illuminates whentheignition switchis
placed inthe ON position. Itturns offsoon after
the engine isstarted.
If any malfunction occursinthe AWD system
while theengine isrunning, orwhile driving, the
Starting anddriving
5-31
&RQGLWLRQ


> (GLW   0RGHO )'@
6-2
In case ofemergency
GUID-F8 C8FFF6-A599 -4B3B-A1E6-F9439E4 BD2DC
SIC2574
Push theswitch ontowarn other drivers when
you must stoporpark under emergency condi-
tions. Allturn signal lightswillflash.
WARNING
. Ifstopping foranemergency, be
sure tomove thevehicle welloffthe
road.
. Do not use thehazard warning
flashers whilemoving onthe high-
way unless unusual circumstances
force youtodrive soslowly that
your vehicle mightbecome ahazard to
other traffic.
. Turn signals donot work when the
hazard warning flasherlightsare
on.
The flasher canbeactuated withtheignition
switch inany position.
Some statelawsmayprohibit theuse of
the hazard warning flasherswitchwhile
driving.
GUID-7C6 757DA-C9FC- 43FC-9E43-9CB1131A89 D7
T o shut offthe engine inan emergency situation
while driving, perform thefollowing procedure:
. Rapidly pushthepush-button ignitionswitch
3 consecutive timesinless than 1.5
seconds, or
. Push andhold thepush-button ignition
switch formore than2seconds.
HAZARD WARNING FLASHER
SWIT CH EMERGEN
CY ENGINE SHUTOFF
&RQGLWLRQ


> (GLW   0RGHO )'@
GUID-5D64A B92-19AE-4EBB-85E2-0 500CB2054C5
TIRE PRESSURE MONITORING SYS-
TEM (TPMS)
GUID-E05 64C3C-60A 2-48DF-92E3 -FDD16E1184 5D
This vehicle isequipped withtheTire Pressure
Monitoring System(TPMS).It monitors tire
pressure ofall tires except thespare. When
the low tirepressure warninglightislit, and the
CHECK TIREPRES (pressure) warningmes-
sage isdisplayed inthe vehicle information
display ,one ormore ofyour tires issignificantly
under-inflated. Ifthe vehicle isbeing driven with
low tirepressure, theTPMS willactivate and
warn youofitby the low tirepressure warning
light. Thissystem willactivate onlywhen the
vehicle isdriven atspeeds above16MPH (25
km/h) .For more details, seeªWarning/indicator
lights andaudible remindersº (P.2-12) andªTire
Pressure Monitoring System(TPMS)º (P.5-3) .
WARNING
. Ifthe low tirepressure warninglight
illuminates whiledriving, avoidsud-
den steering maneuvers orabrupt
braking, reducevehicle speed,pull
off the road toasafe location and
stop thevehicle assoon aspossi-
ble. Driving withunder-inflated tires
may permanently damagethetires
and increase thelikelihood oftire failure.
Serious vehicledamage
could occurandmay lead toan
accident andcould result inserious
personal injury.Check thetire pres-
sure forallfour tires. Adjust thetire
pressure tothe recommended COLD
tire pressure shownonthe Tire and
Loading Information labeltoturn
the low tirepressure warninglight
OFF .If you have aflat tire, replace it
with aspare tireassoon aspossi-
ble.
. When aspare tireismounted ora
wheel isreplaced, theTPMS willnot
function andthelow tirepressure
warning lightwillflash forapproxi-
mately 1minute. Thelight will
remain onafter 1minute. Contact
your NISSAN dealerassoon as
possible fortire replacement and/
or system resetting.
. Replacing tireswiththose notori-
ginally specified byNISSAN could
affect theproper operation ofthe
TPMS.
. Do not inject anytireliquid or
aerosol tiresealant intothetires,
as this may cause amalfunction ofthe
tire pressure sensors.
CHANGING AFLA TTIRE
GUID-847 4486F-6C 56-450C-B1 B8-C91BAAF1ADF3
If you have aflat tire, follow theinstructions
below .
Stopping thevehicle
GUID-C0CA 87DA-59C4-4915-A C34-CE46166 CC4B8
1. Safely movethevehicle offthe road and
away fromtraffic.
2. Turn onthe hazard warning flashers.
3. Park onalevel surface andapply theparking
brake.
4. Continuously Variable Transmission
(CVT) models:
Move theshift lever tothe P(Park) position.
Manual Transmission (MT)models:
Move theshift lever tothe R(Reverse)
position.
5. Turn offthe engine.
6. Raise thehood towarn other traffic, andto
signal professional roadassistance person-
nel that youneed assistance.
7. Have allpassengers getoutofthe vehicle
and stand inasafe place, awayfromtraffic
and clear ofthe vehicle.
In case ofemergency
6-3
FLA TTIRE
&RQGLWLRQ


> (GLW   0RGHO )'@
SCE0981
WARNING
Always followtheinstructions below.
Failure todo socould result indamage
to the charging systemandcause
personal injury.
1. Ifthe booster batteryisin another vehicle
*
B
, position thetwo vehicles (
*
A
and
*
B
)
to bring theirbatteries intoclose proximity to
each other.
Do not allow thetwo vehicles totouch. 2.
Apply theparking brake.
3. Continuously Variable Transmission
(CVT) models:
Move theshift lever tothe P(Park) position.
Manual Transmission (MT)models:
Move theshift lever tothe N(Neutral)
position.
4. Switch offallunnecessary electricalsystems
(headlights, heater,airconditioner, etc.).
5. Remove thevent caps onthe battery (ifso
equipped) .Cover thebattery withafirmly
wrung outmoist clothtoreduce explosion
hazard. 6.
Connect jumpercablesinthe sequence as
illustrated (
*
1
?
*
2
?
*
3
?
*
4
) .
If the battery isdischarged, theignition
switch cannot bemoved fromtheOFF
position. Connectthejumper cablesto
the booster vehicle
*
B
before pushing
the ignition switch.
CAUTION
. Always connect positive(+)toposi-
tive (+)and negative (