2015 NISSAN JUKE engine


> (GLW   0RGHO )'@
2-30
Instrument sand controls
SIC2045
How toarm thevehicle security system
GUID-0B0D5 4E3-2D2E-4E66-84C2-DB 089A802C9C
1. Close allwindows.
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe OFF position
and remove theIntelligent Key from the
vehicle.
3. Close alldoors. Lockalldoors. Thedoors
can belocked with:
.
the L OCK
button onthe Intelligent
K ey
.
any request switch
.
the power doorlockswitch
.
the mechanical key
4. Confirm thatthesecurity indicator light
illuminates. Thesecurity indicator lightstays
on for about 30seconds. Thevehicle
security systemisnow pre-armed. After
about 30seconds thevehicle security
system automatically shiftsintothearmed
phase. Thesecurity lightbegins toflash
once every approximately 3seconds. If,
during this30-second pre-armtimeperiod,
the door isunlocked, orthe ignition switchis
placed inthe ACC orON position, the
system willnotarm.
Even when thedriver and/or passengers
are inthe vehicle, thesystem willactivate
with alldoors locked withtheignition
switch inthe LOCK position. Whenplacing
the ignition switchinthe ACC orON
position, thesystem willbereleased.
V ehicle security systemactivation
GUID-586 0D76E-23D 8-4381-99F0 -0DD8252DADA1
The vehicle security systemwillgive thefollow-
ing alarm:
. The headlights blinkandthehorn sounds
intermittently .
. The alarm automatically turnsoffafter
approximately 50seconds. However, the
alarm reactivates ifthe vehicle istampered
with again. The
alarm isactivated by:
. Unlocking thedoor without usingthe
Intelligent Key ,the request switchorthe
key .(Even ifthe door isopened byreleasing
the door inside lockknob, thealarm will
activate.)
How tostop anactivated alarm
GUID-C58 BB668-0D8A- 41CA-8C30-D900891AB B1A
The alarm willstop byunlocking adoor by
pushing theUNL
OCK
button onthe
Intelligent Key ,pushing therequest switchor
using thekey.The alarm willnotstop ifthe
ignition switchisplaced inthe ACC orON
position.
If the system doesnotoperate asde-
scribed above,haveitchecked bya
NISSAN dealer.
NISSAN VEHICLE IMMOBILIZE RSYS-
TEM
GUID-82475E C2-840C-467B-A31D-9 7F570513B2F
The NISSAN Vehicle Immobilizer Systemwillnot
allow theengine tostart without theuse ofthe
registered key.
If the engine failstostart using theregistered
key ,it may bedue tointerference causedby
another registered key,an automated tollroad
device orautomated paymentdeviceonthe key
ring. Restart theengine usingthefollowing
procedures:
&RQGLWLRQ


> (GLW   0RGHO )'@
1. Leave theignition switchinthe ON position
for approximately 5seconds.
2. Place theignition switchinthe OFF or
L OCK position andwait approximately 10
seconds.
3. Repeat step1and 2again.
4. Restart theengine whileholding thedevice
(which mayhave caused theinterference)
separate fromtheregistered key.
If this procedure allowstheengine tostart,
NISSAN recommends placingtheregis-
tered keyonaseparate keyring toavoid
interference fromother devices.
Statement relatedtosection 15ofFCC
rules forNISSAN Vehicle Immobilizer
System (CONTASSY-BCM .ANT ASSY-
IMMOBILISER)
FCC Notice:
For USA:
This device complies withPart15ofthe
FCC Rules. Operation issubject tothe
following twoconditions: (1)This device
may notcause harmful interference, and
(2) this device mustaccept anyinterfer-
ence received, including interference that
may cause undesired operation.
Note: Changes ormodifications notex-
pressly approved bythe party responsible for
compliance couldvoidtheuser's
authority tooperate theequipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Opera-
tion issubject tothe following twocondi-
tions: (1)this device maynotcause
interference, and(2)this device must
accept anyinterference, includinginterfer-
ence thatmay cause undesired operation
of the device.
SIC2045
Security indicator light
GUID-919 36668-A20A-4 8BD-8CB2-340577FB611D
The security indicator lightislocated onthe
meter panel. Itindicates thestatus ofthe
NISSAN Vehicle Immobilizer System.
The light blinks whenever theignition switchisin
the LOCK, OFForACC position. Thisfunction
indicates thesecurity systems equipped onthe
vehicle areoperational.
If the NISSAN Vehicle Immobilizer Systemis
malfunctioning, thislight willremain onwhile the
ignition switchisin the ON position.
If the light stillremains onand/or the
engine willnotstart, seeaNISSAN dealer
for NISSAN Vehicle Immobilizer System
Instrume ntsand controls
2-31
&RQGLWLRQ


> (GLW   0RGHO )'@
GUID-A 6ACEC3D-5 69F-4102-A2B6-4DE76 F74F79B
SIC4520
T ype A(if so equipped)
SIC4519
T ype B(if so equipped)
T o defog/defrost therear window glassand
outside mirrors(ifso equipped) ,start theengine
and push theswitch
*
1
on. The indicator light
*
2
will illuminate. Pushtheswitch againtoturn
the defroster off.
It will automatically turnoffinapproximately 15
minutes.
CAUTION
When cleaning theinner sideofthe rear
window, becareful nottoscratch or
damage therear window defroster.
GUID-260 8E54F-A0CB -4CE9-8864-9C61F0 1ED6F7
XENON HEADLIG HTS(ifso equipped)
GUID-C62 86FEB-AC40 -4B02-B2DC-4018531 5008C
WARNING
HIGH VOLTAGE
. When xenon headlights areon,they
produce ahigh voltage. To prevent
an electric shock,neverattempt to
modify ordisassemble. Itis recom-
mended tohave yourxenon head-
lights replaced ataNISSAN dealer.
. Xenon headlights provideconsider-
ably more lightthanconventional
headlights. Ifthey arenot correctly
aimed, theymight temporarily blind
an oncoming driverorthe driver
ahead ofyou and cause aserious
accident. Ifheadlights arenot aimed
correctly, itis recommended totake
your vehicle toaNISSAN dealerand
have theheadlights adjustedcor-
rectly.
When thexenon headlight isinitially turnedon,
its brightness orcolor varies slightly .However,
the color andbrightness willsoon stabilize.
. The lifeofxenon headlights willbe
shortened byfrequent on-offopera-
Instrume ntsand controls
2-35
REAR WINDOW ANDOUTSIDE
MIRROR DEFROSTER SWITCH HEADLIGHT
ANDTURN SIGNAL
SWIT CH
&RQGLWLRQ

 
> (GLW   0RGHO )'@
2-38
Instrument sand controls
Battery saversystem
GUID-E840 9034-D45E-48DE-A071- E3A41898289B
. When theheadlight switchisin the
or
position whiletheignition switchisin
the ON position, thelights willautomatically
turn offwithin aperiod oftime after the
ignition switchhasbeen placed inthe OFF
position.
. When theheadlight switchremains inthe
or
position afterthelights auto-
matically turnoff,the lights willturn onwhen
the ignition switchisplaced inthe ON
position.
CAUTION
. When youturn onthe headlight
switch againafterthelights auto-
matically turnoff,thelights willnot
turn offautomatically. Besure to
turn thelight switch tothe OFF
position whenyouleave thevehicle
for extended periodsoftime, other-
wise thebattery willbedischarged.
. Never leavethelight switch on
when theengine isnot running for
extended periodsoftime even ifthe
headlights turnoffautomatically.
Daytime runninglightsystem (forNISMO
models andCanada)
GUID-62FCD 516-90BE-43E6-ACAB-5 CD8364D8567
The daytime runninglightsautomatically illumi-
nate when theengine isstarted withtheparking
brake released. Thedaytime runninglights
operate withtheheadlight switchinthe OFF
position. Turn theheadlight switchtothe
position forfull illumination whendriving atnight.
(The daytime runninglightswillturn off.)
If the parking brakeisapplied beforetheengine
is started, thedaytime runninglightsdonot
illuminate. Thedaytime runninglightsilluminate
once theparking brakeisreleased. Thedaytime
running lightswillremain onuntil theignition
switch isplaced inthe OFF position.
WARNING
When thedaytime runninglightsystem
is active, taillights onyour vehicle are
not on.Itis necessary atdusk toturn on
your headlights. Failuretodo socould
cause anaccident injuringyourself and
others.
SIC4517
SIC4129
&RQGLWLRQ

 
> (GLW   0RGHO )'@
2-40
Instrument sand controls
SIC3672
FOG LIGHT SWITCH(ifso equipped)
GUID-8A4 4D476-039 A-440B-9B7 F-71C22E22C8D1
T o turn thefog lights on,turn theheadlight
switch tothe
position, thenturntheswitch
to
the
position. To turn them off,turn the
switch tothe OFF position.
The headlights mustbeonfor the fog lights to
operate.
GUID-BCFDC9 61-0310-45F1-A715-10 44C3AF17A 3
SIC4521
T o sound thehorn, pushthecenter padarea of
the steering wheel.
WARNING
Do not disassemble thehorn. Doing so
could affect proper operation ofthe
supplemental frontairbag system.
T ampering withthesupplemental front
air bag system mayresult inserious
personal injury.
GUID-214BC1 87-5FC2-47C2-A34A-24 AAF5D08E5 2
SIC4544
The vehicle shouldbedriven withtheVehicle
Dynamic Control(VDC)system onfor most
driving conditions.
If the vehicle isstuck inmud orsnow ,the VDC
system reduces theengine outputtoreduce
wheel spin.Theengine speedwillbereduced
even ifthe accelerator isdepressed tothe floor.
If maximum enginepowerisneeded tofree a
stuck vehicle, turntheVDC system off.
T o turn offthe VDC system, pushtheVDC OFF
switch. The
indicator lightwillilluminate.
Push theVDC OFFswitch againorrestart the
engine toturn onthe system. (SeeªVehicle
Dynamic Control(VDC)systemº (P.5-37) .)
HORN VEHICLE
DYNAMIC CONTROL (VDC)
OFF SWIT CH
&RQGLWLRQ

 
> (GLW   0RGHO )'@
GUID-AF2D 0C38-8F40-4385-9E9C -0A71DCA2931A
WARNING
Do not use orallow occupants touse
the seat heater ifyou orthe occupants
cannot monitor elevated seattempera-
tures orhave aninability tofeel pain in
body parts thatcontact theseat. Useof
the seat heater bysuch people could
result inserious injury.
CAUTION
. The battery couldrundown ifthe
seat heater isoperated whilethe
engine isnot running.
. Do not use theseat heater for
extended periodsorwhen noone
is using theseat.
. Do not putanything onthe seat
which insulates heat,suchasa
blanket, cushion, seatcover, etc.
Otherwise, theseat maybecome
overheated.
. Donot place anything hardorheavy
on the seat orpierce itwith apin or
similar object.Thismay result in damage
tothe heater.
. Any liquid spilled onthe heated seat
should beremoved immediately
with adry cloth.
. When cleaning theseat, never use
gasoline, thinner,orany similar
materials.
. Ifany malfunctions arefound orthe
heated seatdoes notoperate, turn
the switch offand have thesystem
checked byaNISSAN dealer.
SIC2770
The seats arewarmed bybuilt-in heaters. The
switches locatedonthe center console canbe
operated independently ofeach other.
1. Start theengine.
2. Select heatrange.
*
1
For high heat, push theHI(High) sideof
the switch.
*
2
For low heat, push theLO (Low) sideof
the switch.
The indicator lightinthe switch
*
3
will
illuminate whentheheater ison.
3. To turn offthe heater, returntheswitch to
the level position. Makesuretheindicator
light goes off.
Instrume ntsand controls
2-41
HEA TED SEATS(ifso equippe d)
&RQGLWLRQ

 
> (GLW   0RGHO )'@
2-42
Instrument sand controls
The heater iscontrolled byathermostat,
automatically turningtheheater onand off.
The indicator lightwillremain onaslong as
the switch ison.
When thevehicle's interioriswarmed, or
before youleave thevehicle, besure toturn
off the switch.
GUID-850FE E13-D4FF-4D 25-97B5-E92230D2130 2
SIC4525
The power outletislocated inthe instrument
panel.
CAUTION
. The outlet andplug maybehot
during orimmediately afteruse.
. Do not use with accessories that
exceed a12 volt, 120W (10A)power
draw. Donot use double adapters or
more thanoneelectrical accessory.
. Use power outletwiththeengine
running toavoid discharging the
vehicle battery. .
Avoid usingpower outletwhenthe
air conditioner, headlightsorrear
window defroster ison.
. This power outletisnot designed
for use with acigarette lighterunit.
. Push theplug inas far asitwill go.
If good contact isnot made, theplug
may overheat orthe internal tem-
perature fusemayopen.
. Before inserting ordisconnecting a
plug, besure theelectrical acces-
sory being usedisturned OFF.
. When notinuse, besure toclose
the cap. Donot allow water orany
liquid tocontact theoutlet.
POWER OUTLET
&RQGLWLRQ


> (GLW   0RGHO )'@
2-50
Instrument sand controls
GUID-A C8C958B-C3D E-4C13-A406-ED56FDB 6824E
CAUTION
Do not use forextended periodsoftime
with theengine stopped. Thiscould
result inadischarged
battery.
SIC4572
MAP LIGHTS (ifso equipped)
GUID-1B 5DECC4-5 E3F-4B04-86 66-6F7000099558
Operate themap lightswitch toturn themap
light onoroff.
*
1
: ON position
*
2
: OFF position
SIC4573
MAP LIGHT CONTROL SWITCH(ifso
equipped)
GUID-D0 30AC73-6A5 E-41D1-B4E5-4C8B 6A705368
The map lights control switchhasthree posi-
tions: ON
*
1
, OFF
*
2
and center.
ON position
GUID-96E AA639-DA91 -44C2-B280-951FC4FE7 379
When theswitch isin the ON position
*
1
, the
map lights willilluminate.
OFF position
GUID-31 5173DD-FC 92-4382-95FF-5966BDB A76F5
When theswitch isin the OFF position
*
2
, the
map lights willnot illuminate, regardless ofthe
condition.
INTERIOR LIGHTS
&RQGLWLRQ