2015 NISSAN GT-R engine

2-52Instruments and controls
Headlight beam select
When the headlights are on, push the le�fer to
the front of the �fehicle
*1to switch to the high
�beams. The high-�beam indicator light illumi-
nates. (
“High �beam indicator light” page 2-
31)
Pull the le�fer to the neutral position
*2to
switch to the low �beams.
Pulling the le�fer toward you
*3will flash the
headlight high �beam e�fen when the headlight
switch is in the OFF position.
CAUTION
Use low beams when there are cars
approaching from the opposite direc-
tion, during city driving and at similar
times.
Battery saver system
A chime will sound when the dri�fer side door is
opened with the light switch in theorposition and the ignition switch in the ACC,
OFF or LOCK position. (“Light reminder
chime” page 2-32)
When the headlight switch is in the
orposition while the ignition switch is in the ON
position, the lights will automatically turn off after
a period of time when the ignition switch has
�been pushed to the OFF position.
When the headlight switch remains in the
orposition after the lights automatically turn
off, the lights will turn on when the ignition
switch is pushed to the ON position.
NOTICE
. When you turn on the headlight
switch again after the lights auto-
matically turn off, the lights will not
turn off automatically. Be sure to
turn the light switch to the OFF
position when you leave the vehicle
for extended periods of time, other-
wise the battery will be discharged.
. Never leave the light switch on
when the engine is not running for
extended periods of time even if the
headlights turn off automatically.
Daytime running light system
The daytime running lights automatically illumi-
nate when the engine is started with the parking
�brake released. The daytime running lights
operate with the headlight switch in the OFF
position. Turn the headlight switch to the
position for full illumination when dri�fing at night.
If the parking �brake is applied �before the engine
is started, the daytime running lights do not
illuminate. The daytime running lights illuminate
once the parking �brake is released. The daytime
running lights will remain on until the ignition
switch is pushed to the OFF position.

2-54Instruments and controls
The seat heaters can be used when the igniti\fn
switch is in the ON p\fsiti\fn\b The fr\fnt seats are
warmed by the built-in heaters\b
TURNING ON THE HEATERS
Push the "HI" \fr "LO" side \ff the switch t\f
activate the heaters\b The switch indicat\fr
illuminates\b
Switch p\fsiti\fnFuncti\fn
HI T\f heat the seat quickly
LO T\f keep the seat warm
TURNING OFF THE HEATERS
M\fve the switch t\f the level p\fsiti\fn\b The switch
indicat\fr turns \fff\b
WARNING
Do not use or allow occupants to use
the seat heater if you or the occupants
cannot monitor elevated seat tempera-
tures or have an inability to feel pain in
those body parts in contact with the
seat. Use of the seat heater by such
people could result in serious injury.
CAUTION
. Do not put anything on the seat
which insulates heat, such as a
blanket, cushion, seat cover, etc.
Otherwise, the seat may become
overheated.
. Do not place anything hard or heavy
on the seat or pierce it with a pin or
similar object. This may result in
damage to the heater.
. Any liquid spilled on the heated seat
should be removed immediately with a dry cloth.
. If any malfunctions are found or the
heated seat does not operate, turn
the switch off and have the system
checked by a GT-R certified NISSAN
dealer.
NOTICE
.The battery could run down if the
seat heater is operated while the
engine is not running.
. Do not use the seat heater for
extended periods or when no one
is using the seat.
. When cleaning the seat, never use
gasoline, thinner, or any similar
materials.
HEATED SEATS (if so equipped)

CAUTION
.The outlet and plug may be hot
during or immediately after use.
. Do not use with accessories that
exceed a 12 volt, 120W (10A) power
draw. Do not use double adapters or
more than one electrical accessory.
. This power outlet is not designed
for use with a cigarette lighter unit.
. Before inserting or disconnecting a
plug, be sure the electrical acces-
sory being used is turned OFF.
. When not in use, be sure to close
the cap. Do not allow water to
contact the outlet.
NOTICE
.Use power outlet with the engine
running to avoid discharging the
vehicle battery.
. Avoid using power outlet when the
air conditioner, headlights or rear
window defroster is on. .
Push the plug in as far as it will go.
If good contact is not made, the plug
may overheat or the internal tem-
perature fuse may open.
Next to the steering wheel
Pull out the cap to use the outlet.
Replace the cap after use.
Instruments and controls2-55
POWER OUTLETS

2-62Instruments and controls
If the power window automatic function doe\f
not operate properly after performing the pro-
cedure a\bove, have your vehicle checked \by a
GT-R certified NISSAN dealer.
MAP LIGHTS
Pu\fh the \button a\f illu\ftrated to turn the light on
or off.
INTERIOR LIGHT CONTROL SWITCH
The interior light control \fwitch ha\f three
po\fition\f: ON
*1, DOOR*2and OFF*3.
ON position
When the \fwitch i\f in the ON po\fition*1, the
map light\f will illuminate.
NOTICE
Do not use the light for extended
periods of time with the engine
stopped. This could result in a dis-
charged battery.
INTERIOR LIGHTS

2-64Instruments and controls
The HomeLinkŠUniversa�f Transceiver provides a
convenien�b way �bo conso�fida�be �bhe func�bions of
up �bo �bhree individua�f hand-he�fd �bransmi�b�bers in�bo
one bui�f�b-in device.
HomeLink
ŠUniversa�f Transceiver:
. Wi�f�f opera�be mos�b Radio Frequency (RF)
devices such as garage doors, ga�bes, home
and office �figh�bing, en�bry door �focks and
securi�by sys�bems.
. Is powered by your vehic�fe’s ba�b�bery. No
separa�be ba�b�beries are required. If �bhe
vehic�fe’s ba�b�bery is discharged or is dis-
connec�bed, HomeLink
Šwi�f�f re�bain a�f�f pro-
gramming.
When the HomeLink
ŠUniversal Transcei-
ver is programmed, retain the original
transmitter for future programming proce-
dures (Example: new vehicle purchases) .
Upon sale of the vehicle, the programmed
HomeLink
ŠUniversal Transceiver buttons
should be erased for security purposes.
For additional information, refer to
“Programming HomeLinkŠ” page 2-
64.
WARNING
. Do not use the HomeLinkŠUniversal
Transceiver with any garage door
opener that lacks safety stop and
reverse features as required by
federal safety standards. (These
standards became effective for
opener models manufactured after
April 1, 1982.) A garage door opener
which cannot detect an object in the
path of a closing garage door and
then automatically stop and reverse,
does not meet current federal safety
standards. Using a garage door
opener without these features in-
creases the risk of serious injury or
death.
. During the programming procedure
your garage door or security gate
will open and close (if the transmit-
ter is within range) . Make sure that
people or objects are clear of the
garage door, gate, etc. that you are
programming.
. Your vehicle’s engine should be
turned off while programming the
HomeLink
ŠUniversal Transceiver. Do not breathe exhaust gases; they
contain colorless and odorless car-
bon monoxide. Carbon monoxide is
dangerous. It can cause uncon-
sciousness or death.
PROGRAMMING HomeLinkŠ
If you have any ques�bions or are having difficu�f�by
programming your HomeLinkŠbu�b�bons, refer �bo
�bhe HomeLinkŠweb si�be a�b: www.home�fink.com
or ca�f�f 1-800-355-3515.
NOTE:
It is also recommended that a new battery
be placed in the hand-held transmitter of
the device being programmed to
HomeLink
Šfor quicker programming and
accurate transmission of the radio-fre-
quency.
1. Posi�bion �bhe end of your hand-he�fd �bransmi�b-
�ber 1-3 in (26-76 mm) away from �bhe
HomeLink
Šsurface, keeping �bhe HomeLinkŠ
indica�bor �figh�b*1in view.
HomeLinkŠUNIVERSAL
TRANSCEIVER

3-4Pre-driving checks and adjustments
WARNING
.Always have the doors locked while
driving. Along with the use of seat
belts, this provides greater safety in
the event of an accident by helping
to prevent persons from being
thrown from the vehicle. This also
helps keep children and others from
unintentionally opening the doors,
and will help keep out intruders.
. Before opening any door, always
look for and avoid oncoming traffic.
. Do not leave children unattended
inside the vehicle. They could un-
knowingly activate switches or con-
trols. Unattended children could
become involved in serious acci-
dents.
CAUTION
To prevent theft or accidents, be sure to
stop the engine and lock the doors
before stepping away from the vehicle.
NOTICE
When the battery cable is removed from
the battery terminal, do not close either
of the front doors. The automatic win-
dow adjusting function will not work,
and the side roof panel may be da-
maged. (
“Automatic adjusting
function” page 2-61)
NOTE:
. The doors of this vehicle are somewhat
harder to close than those of an
ordinary vehicle (especially when the
vehicle is new) . This is because the
stiffness of the rubber has been in-
creased to improve the airtightness of
the vehicle interior during situations
such as higher speed driving. This does
not indicate that there is a malfunction.
. When the driver’s door is locked or
unlocked, the fuel-filler door is auto-
matically locked or unlocked at the
same time.
When the door is being opened, the window is
a\ftomaticall\b lowered slightl\b to avoid contact
between the window and the side roof panel.
When the door is closed, the window is a\ftomaticall\b raised slightl\b. (
“A\ftomatic
adj\fsting f\fnction” page 2-61)
DOORS

TROUBLESHOOTING GUIDE
SymptomPossible causeAction to take
W�fen pus�fing t�fe ignition
switc�f to stop t�fe engine T�fe S�bIFT P warning appears on t�fe display and
t�fe inside warning c�fime sounds continuously.
T�fe s�fift lever is not in t�fe
&Pposition. S�fift t�fe s�fift lever to t�fe&Pposition.
W�fen opening t�fe driver’s door
to get out of t�fe ve�ficle T�fe inside warning c�fime sounds continuously. T�fe ignition switc�f is in t�fe ACC
position.
Pus�f t�fe ignition switc�f to t�fe OFF
position.
T�fe Intelligent Key is in t�fe Intelligent
Key port. Remove t�fe Intelligent Key from t�fe
Intelligent Key port.
W�fen closing t�fe door after
getting out of t�fe ve�ficle T�fe NO KEY warning appears on t�fe display, t�fe
outside c�fime sounds 3 times and t�fe inside
warning c�fime sounds for approximately 3 sec-
onds.
T�fe ignition switc�f is in t�fe ACC or
ON position.
Pus�f t�fe ignition switc�f to t�fe OFF
position.
T�fe S�bIFT P warning appears on t�fe display and
t�fe outside c�fime sounds continuously. T�fe ignition switc�f is in t�fe ACC or
OFF position and t�fe s�fift lever is not
in t�fe
&Pposition.Move t�fe s�fift lever to t�fe
&Pposition and
pus�f t�fe ignition switc�f to t�fe OFF
position.
W�fen closing t�fe door wit�f t�fe
inside lock knob turned to LOCK T�fe outside c�fime sounds for approximately 3
seconds and all t�fe doors unlock. T�fe Intelligent Key is inside t�fe ve�ficle
or trunk.
Carry t�fe Intelligent Key wit�f you.
W�fen pus�fing t�fe door �fandle
request switc�f to lock t�fe door T�fe outside c�fime sounds for approximately 2
seconds. T�fe Intelligent Key is inside t�fe ve�ficle
or trunk.
Carry t�fe Intelligent Key wit�f you.
A door is not closed securely. Close t�fe door securely.
T�fe door �fandle request switc�f is
pus�fed before t�fe door is closed. Pus�f t�fe door �fandle request switc�f after
t�fe door is closed.
W�fen closing t�fe trunk lid T�fe outside c�fime sounds for approximately 10
seconds and t�fe trunk lid opens.
T�fe Intelligent Key is inside t�fe trunk.
Carry t�fe Intelligent Key wit�f you.
Pre-driving checks and adjustments3-17

3-18Pre-driving checks and adjustments
OPENING THE HOOD
1. Pull the hood lock release handle*1
located \felow the instrument \banel. The
hood will then s\bring u\b slightly.
2. Pull the lever*2at the front of the hood
with your fingerti\bs and raise the hood.3. Gras\b the insulated \bart of the stay*3and
release it from the hook, then securely insert
it into the hood hole
*4.
WARNING
If you see steam or smoke coming from
the engine compartment, do not open
the hood. Doing so could cause injury.
HOOD