
7
Comfort controlsVents ................................................................................................7-2 Automatic climate control air conditioner  
..............
...........
.........
.....7-5 
Important air conditioning operating tips  .. 
...........
...........
.........
.....7-14 
Air purifier  .....................................................................................7-14 AM/FM radio/CD player  (if so equipped) .....................................7-15 Handling of Discs  ..........................................................................7-18Audio Files (MP3/WMA/AAC)  ....................................................7-20 Important Points on Safety for the Customer  ................................7-24 Operation Keys  ..............................................................................7-24Listen to Radio ...............................................................................7-28 Listen to Satellite Radio (if so equipped) .......................................7-29 Listen to CDs  .................................................................................7-31Listen to MP3s  ...............................................................................7-32 Listen to an iPod  ............................................................................7-33 Listen to Audio Files on a USB Device .........................................7-35Listen to Bluetooth Audio (if so equipped) ....................................7-38 Display Indicator  ...........................................................................7-40 Audio Quality and Volume Balance Adjustment ...........................7-41System Settings ..............................................................................7-42 Troubleshooting .......... 
...........
...........
...........
...........
.........
.........
.....7-45 
Antenna ..........................................................................................7-47General information about your radio  ..... 
...........
...........
...........
.....7-48
BK0211800US.book  1 ページ  2014年3月12日 水曜日 午後2時42分 

Automatic climate cont
rol air conditioner 
Comfort controls 7-5
7
N00731501311
The air conditioner can only be us 
ed while the engine is running.
N00711801552
Automatic climate control air conditioner Control panel Automatic climate control air conditioner - Type 11- Temperature control switch 2- Air conditioning switch 3- MODE switch 4- Blower speed  
selection switch 
5- Air selection switch 6- Defogger switch 7- AUTO switch8- Electric rear wi 
ndow defogger switch 
  P.5-183 
9- OFF switch 10- Temperature display  
 P.7-7 
11- Air conditioning indicator 12- Blower speed display  13- Mode selection display
BK0211800US.book  5 ページ  2014年3月12日 水曜日 午後2時42分 

Automatic climate cont
rol air conditioner 
7-6 Comfort controls
7
Dual-zone automatic climate c 
ontrol air conditioner - Type 2
1- Driver’s side temperature control 
switch
2- Air conditioning switch 3- Blower speed selection switch 4- MODE switch5- Passenger’s side temperature control 
switch 
6- Air selection switch7- Defogger switch 8- AUTO switch 9- Electric rear window 
 defogger switch  
  P.5-183 
10- OFF switch 11- Driver’s side temperature display 
  P.7-7 
12- DUAL indicator 13- Mode selection display 
14- Passenger’s side temperature display  
  P.7-7 
15- Air conditioning indicator16- Blower speed display 
NOTE
 There is an interior air temperature sensor (A) in the illustrated position.Never place anything ov 
er the sensor, since 
doing so will prevent it from functioning properly.
BK0211800US.book  6 ページ  2014年3月12日 水曜日 午後2時42分 

Automatic climate cont
rol air conditioner 
Comfort controls 7-7
7
N00736901189
Press   of the blower speed selection switch to increase the blower speed. Press   of the blower speed selection switch to decrease the blower speed. The selected blower sp 
eed will be shown in 
the display (A).
N00737001334
Press   or   of the temperature controlswitch to the desired temperature. The selected temperature will be shown in the display (A).
NOTE
 Since the air conditi
oning operation is con- 
trolled while the ECO mode is operating,you may feel that effectiveness of the airconditioner is insufficient.   ECO mode switch P.5-177 
 Even during ECO mode operation, you can select normal operati 
on of the air condi- 
tioner.On vehicles equipped  
with Mitsubishi Multi- 
Communication System,  
screen operations 
can be used to change the setting. Refer tothe separate owner’ 
s manual for details. 
 In extreme cold, the air conditioning control panel screen may operate sluggishly. This does not indicate a problem. It will disappear when 
 the vehicle interior 
temperature rises to a normal temperature.  A sound will be made every time you push all the switches.
Blower speed selection switch 1- Increase 2- DecreaseType 1 Type 2
Temperature control switch 
NOTE
 The temperature value of air conditioner is switched in conjunction  
with outside temper- 
ature display unit of the multi informationdisplay. On vehicles equipped with multi information display - Type 1, refer to “Changing the tem-perature unit” on page 5-136. On vehicles equipped with multi information display - Type 2, refer to “Changing the tem-perature unit” on page 5-147.
BK0211800US.book  7 ページ  2014年3月12日 水曜日 午後2時42分 

Automatic climate cont
rol air conditioner 
7-8 Comfort controls
7
The above indicates the  
factory settings. You 
can personalize the air  
selection switch and 
air conditioning switch to match your per- sonal preferences.Contact your Mitsubishi  
Motors dealer or a 
repair facility of your 
 choice for assistance. 
Refer to “Personalizi 
ng the air conditioning 
switch (Changing the function setting)” on page7-11. Refer to “Personalizing the air selection(Changing the function setting)” on page7-10. The driver’s side and the passenger’s side temperature can be controlled independently.At this time, the “ 
DUAL” indicator will be 
shown in the display (A).  Synchronized mode 
If the driver’s side temperature control switch is pressed, the passenger’s sidetemperature will also be controlled to the same setting temperat 
ure as the driver’s 
side. Dual mode If the passenger’s side temperature con- trol switch is pressed under synchronizedmode, the system will switch to dual mode. In dual mode, the driver’s side and the passenger’s side  
temperature can be 
set separately by usi 
ng each temperature 
control switch.Press the AUTO switch to return to syn- chronized mode.
 When the engine coolan
t temperature is low, 
the air temperature from the heater will becool/cold until the engi 
ne warms up, even if 
you have selected warm 
 air with the switch. 
To prevent the windshield and windows from fogging up, the vent mode 
 will be changed to 
“ ” and the blower speed will be reduced while the system is operating in the AUTO mode.  When you feel that it is hotter or colder than the set temperature, you may adjust it to yourpreference. For further information, we recommend you to consult an authorized Mitsubishi Motorsdealer or a repair fa 
cility of your choice. 
 When the temperature is set to the highest or the lowest setting, the air selection and the air conditioner will be  
automatically changed 
as follows.Also, if the air selection is operated manually after an automatic ch 
angeover, manual oper- 
ation will be selected. • Quick Heating (When th 
e temperature is set 
to the highest setting)Outside air will be introduced and the air conditioner will stop. • Quick Cooling (When th 
e temperature is set 
to the lowest setting) Inside air will be recirculated and the airconditioner wi 
ll operate.
NOTE
Synchronized mode and dual mode
  
(if so equipped)
BK0211800US.book  8 ページ  2014年3月12日 水曜日 午後2時42分 

Automatic climate cont
rol air conditioner 
Comfort controls 7-9
7
N00737101218
To change the amount of air flowing from the vents, press the MODE switch. Each time the MODE switch is pressed, the mode changesto the next one in the following sequence: “”  
 “” 
 “” 
 “” 
 “”. 
The selected mode is shown in the display (A). Refer to “Changing the mode selection”on page 7-3.
N00703401025
When this switch is pressed, the mode changes to the “ ” mode. The indicator light (A) will come on. The selected mode is shown in the display (B). Refer to “Changingthe mode selection” on page 7-3.
N00737201378
Normally, use the outside 
 air position to keep 
the windshield and side 
 windows clear and to 
quickly remove fog or frost from the wind-shield. To change the air selection, simply press the air selection switch.  Outside air {Indicator light (A) OFF} Outside air is introduced into the passen- ger compartment.  Recirculated air {Indicator light (A) ON} Air is recirculated  
inside the passenger 
compartment. 
When the air conditioning turns on, the air selection is controlled automatically. When the air conditioning turns  
off, the air selection
Mode switch 
Defogger switch 
NOTE
When the defogger switch is pressed, the air conditioning system au 
tomatically operates 
and outside air (as oppos 
ed to recirculated 
air) is selected. This automatic switchingcontrol is carried out to prevent misting of the windows even if “Disable automatic air conditioning control” or 
 “Disable automatic 
air control” is set. Refer to “Personalizing the air conditioning sw 
itch (Changing the 
function setting)” on pa 
ge 7-11, “Personaliz- 
ing the air selection  
(Changing the function 
setting)” on page 7-10.
Air selection switch 
BK0211800US.book  9 ページ  2014年3月12日 水曜日 午後2時42分 

Automatic climate cont
rol air conditioner 
7-10 Comfort controls
7
automatically goes back 
 to the outside posi- 
tion.If high cooling performanc 
e is desired, or if 
the outside air is dusty 
 or contaminated in 
some way, use the  
recirculat
ion position. 
Switch to the outside position every now and then to keep the windows from fogging up.
N00712300023
You can change the following functions to match your preference. 
 Enable automatic air control: When the AUTO switch is pressed, the airselection switch will also be automatically controlled.  Disable automatic air control: Even when the AUTO switch is pressed,the air selection switch will not be auto- matically controlled.  Changing the settings Press the air selection switch for approxi- mately 10 seconds or longer. When the setting has changed, the systemwill beep and the indi 
cator light will flash. 
• When the setting has changed from enabled to disabled,  
the system will beep 
three times and the indicator light will flash three times. • When the setting has changed from dis-abled to enabled, the system will beep two times and the indicator light will flash three times.On vehicles equippe 
d with Mitsubishi 
Multi-Communication System, screen operations can also be  
used to change the 
setting. Refer to the separate owner’s manual for details.
N00737301353
Push the switch, and the air conditioning compressor will turn on. The “ ” indicator will be shown in the display (A). Push the switch again and the air condition- ing compressor will stop and the indicatorgoes off.
CAUTION Using recirculated air for a long time may cause the windows to fog up.NOTE
 If the mode selection 
is set “ ” position, 
you cannot turn the ai 
r conditioner off or 
select the recirc 
ulation position. 
This prevents the windows from fogging up.  When the engine coolan
t temperature rises to 
a certain level, the air selection is automati- cally switched to the  
recirculation position 
and the indicator light  
(A) comes on. At this 
time, the system will not switch to the out- side position even if  
the air selection switch 
is pushed.
 
Personalizing the air selection  (Changing the function setting) 
NOTE
 The factory setting is 
“Enable automatic air 
control”.
 When the defogger switch is pressed, the air selection will automati 
cally change to the 
outside air position, even if the system is setto “Disable automatic air control”, in order to prevent windows from fogging up.
Air conditioning switch 
NOTE
BK0211800US.book  10 ページ  2014年3月12日 水曜日 午後2時42分 

Automatic climate cont
rol air conditioner 
Comfort controls 7-11
7
N00712200022
You can change the following functions to match your preference.  Enable automatic ai
r conditioning control: 
When the AUTO switch is pressed, or when the temperature control switch hasbeen set to the minimum temperature, the air conditioning switch is automatically controlled.  Disable automatic air conditioning con- trol: The air conditioning switch is not auto- matically controlled,  
unless the air condi- 
tioning switch is used.  Changing the settings Press the air conditioning switch for about10 seconds or longer. When the setting has changed, the system will beep and the indi 
cator light will flash. 
• When the setting has changed from enabled to disabled, the system will beep three times and the indicator light willflash three times. • When the setting has changed from dis- abled to enabled, the system will beeptwo times and the i 
ndicator light will 
flash three times. On vehicles equippe 
d with Mitsubishi 
Multi-Communication System, screen operations can also be used to change the setting. Refer to th 
e separate owner’s 
manual for details.
N00703501039
When the AUTO switch is pressed, the indi-cator light (A) comes on and the mode selec-tion, blower speed adju 
stment, reci
rculated/ 
outside air selection, temperature adjustment, and air conditioner ON/ 
OFF status are all 
controlled automatically.
CAUTION Using the air conditioni
ng slightly increases 
the engine idle speed. Therefore, make sureyour foot is firmly on the brake pedal whenshifting the transaxle into drive.NOTE
 If a problem is detect
ed in the air condition- 
ing compressor, the “ ” indicator blinks. Press the air conditioning 
 switch once to turn 
it off, then once more to turn it back on. If the“ ” indicator does not blink, there is no problem. If it does blink, 
 have it checked at 
an authorized Mitsubish 
i Motors dealer or a 
repair facility of your choice.  For example, sometimes after using a high- pressure car wash, the  
condenser can get wet, 
and the “ ” indicator blinks temporarily. Wait for a while, pres 
s the air conditioning 
switch once to turn the system off, then oncemore to turn it back on. Once the water evap-orates, the blinking will stop.
 
Personalizing the 
air conditioning  
switch (Changing the function set-ting) 
NOTE
 The factory setting is 
“Enable automatic air 
conditioning control”.  When the defogger switch 
is pressed, the air 
conditioner will run au 
tomatically, even if 
the system is set to “Disable automatic airconditioning control”, in order to prevent windows from fogging up.
AUTO switch 
BK0211800US.book  11 ページ  2014年3月12日 水曜日 午後2時42分