2015 MITSUBISHI MIRAGE display

AM/FM electronically tuned radio with CD player (if so equipped) 7-20 Comfort controls
7
3. Press the seek button to tune to a station, or press one of the memory select buttonsto tune in to a station memorized for that button. Refer to “Automatic tuning”, “Manualtuning” or “To enter frequencies into the memory”.
The frequency changes every time the seek button is pressed. Pres
s the button to select
the desired station. After keeping the seek button depressed until it beeps, release the button, and the selected station reception will start. As many as 6 AM and
12 FM stations can be
entered into the memory. To store a frequency in the memory, follow these steps:
1. Press the seek button to tune to the fre- quency you wish to keep in the memory.2. Press one of the me
mory select buttons
until it beeps. The sound will be momentarily inter-rupted while the frequency is being entered into the memory. The number of the button matching the entry in the mem-ory as well as the fre
quency is displayed.
3. The preset memory setting is retrieved by pressing the button a
nd then releasing it
within 1 second.
N00735300756
N00735501087
1. Insert the disc wi
th the label facing up.
When a disc is inserted, the CD indicator will come on and the CD player will begin playing even if the radio is being used.The CD player will also start playback when the CD button is pressed with a disc in the player or with a disc set in the Disc-loading slot, even if the radio is being used.
To tune the radio

Manual tuning Automatic tuningTo enter frequencies into the mem- ory

CD control panel and display

1- CD (CD mode changeover) button 2- RADIO button 3- DISP (Display)/ (Return) button 4- CD eject button 5- CD indicator 6- Disc-loading slot
7- FOLDER indicator 8- TRACK indicator 9- Display10- RPT (Repeat)/F-RPT (Folder repeat
mode) indicator
11- RDM (Random mode)/F-RDM (Folder
random mode) indicator
12- SEL (Select) indicator 13- PAGE (Title scroll) button 14- (Fast-reverse/
Track down) button
15- (Fast-forward/Track up) button 16- PWR (On-Off)/SEL
(Select) switch
17- RPT (Repeat) button18- RDM (Random) buttonTo listen to a CD

To s e t a d i s c

BK0212400US.book 20 ページ ２０１４年４月１日　火曜日　午後２時２１分

AM/FM electronically tuned radio with CD player (if so equipped)
Comfort controls 7-21
7
2. To stop the CD, turn off the power by pressing the PWR switch for 2 seconds orlonger, or change over to the radio mode by pressing the RADIO button, or eject the disc by pressi
ng the eject button.
When the CD eject button is pressed, the disc automatically stops and is ejected. Press the CD button if a disc is already in the CD player. The CD player will enter CD
mode and start playba
ck. The track number
and the playing time will appear on the dis-play. The tracks in the disc will be played continuously. This CD player allows you to play MP3 (MPEG Audio Layer-3) files recorded on CD-ROMs, CD-Rs (recordable CDs), and CD-RWs (rewritable CDs) in ISO9660 Level 1/Level 2, Joliet, a
nd Romeo formats. Each
disc can hold up to 255 files in up to 100 fold- ers, up to a maximum of 16 levels. The ID3 tag information can be displayed during MP3playback. For information concerning ID3 tags, refer to “CD text
and MP3 title display”
on page 7-23. 1. Insert a disc containing MP3 files into the slot. 2. Press the CD button if a disc is already in the CD player.The display shows “READING”, then playback will begin.
NOTE
 For information on adjusting the volume and tone, refer to “To adju
st the volume” on page
7-18 and “To adjust the tone” on page 7-19.  3 inches (8 cm) compact disc cannot be played on this CD player.  For information concerning the handling of compact discs, refer to “Handling of com- pact discs” on page 7-40.
To eject a disc

NOTE
 If you do not remove the disc before 15 sec- onds have elapsed, the CD player will auto-matically reload the disc and stop.
To listen to a music CD

To listen to an MP3 CD

NOTE
 While listening to a disc on which CD-DA (CD-Digital Audio) a
nd MP3 files have both
been recorded, you can switch between read-ing of the CD-DA, reading of the MP3 files, and the external audi
o input mode by press-
ing the CD button for 2 seconds or longer(until you hear a beep). For information on the external audio input, refer to “To use the external audio inputfunction” on page 7-26.  With a disc that contains both CD-DA and MP3 files, the CD-DA files are automati- cally played first.  The playback sound quality differs depend- ing on the encoding software and the bit rate. For details, refer to the user manual of yourencoding software.  Depending on file/folde
r configurations on a
disc, it may take some
time before playback
starts.  MP3 encode software and writing software are not supplied with this unit.  You may encounter trouble in playing an MP3 or displaying the information of MP3 files recorded with certain writing softwareor CD recorders (CD-R/RW drivers).  If you record too many folders or files other than MP3 onto a disc, it
may take some time
before playback starts.  This unit does not record MP3 files.  For information on CD-Rs/RWs, refer to “Notes on CD-Rs/RWs” on page 7-41.
BK0212400US.book 21 ページ ２０１４年４月１日　火曜日　午後２時２１分

AM/FM electronically tuned radio with CD player (if so equipped) 7-22 Comfort controls
7
Folder selection orde
r/MP3 file playback
order (Example)
The disc is fast-forwarded while the but- ton is held down.Playback will begi
n once the button is
released. The disc is fast-reversed while the button is held down.Playback will begi
n once the button is
released. The disc will skip as
many songs as the num-
ber of times the but
ton is pressed.
The display window will display the track number of the track selected. The disc will skip as
many songs as the num-
ber of times the but
ton is pressed.
The display window will display the tracknumber of the track selected.
Operate the SEL switch to
select desired file.
When this mode is activated by pressing the SEL switch, the SEL i
ndicator will be dis-
played in the display.
CAUTION Attempting to play a file not in the MP3 for- mat which has the “.mp3” file name mayproduce noise from the speakers and speakerdamage, and can da
mage your hearing.
Folder selection in the order File selection in the order
Root folder (Root directory)
Level 1 Level 3 Level 4
Level 2
To fast-forward/reverse the disc

Fast-forward Fast-reverseTo select a desired track

Tr a c k u pTr a c k d o w n
To find a file (MP3 CDs only)

Press the SEL switch :To start this mode or
to select the folder or file.
Turn the SEL switch :To show the folder or
file
NOTE
 To cancel the selecti
on, press the button
to return to the previous step.  If no operation is perf
ormed for 10 seconds
or more or other butt
on is operated after the
SEL switch has been turned, searching of the desired file is canceled.  If no operation is performed for 5 seconds or more after the file is
displayed, playback
starts.  When the SEL indicato
r is not shown on the
display and the SEL switch is operated, thevolume adjustment is activated.
BK0212400US.book 22 ページ ２０１４年４月１日　火曜日　午後２時２１分

AM/FM electronically tuned radio with CD player (if so equipped)
Comfort controls 7-23
7
Press the RPT button to
repeat the same track.
If the RPT button is pressed, the RPT indica- tor will come on. To exit this mode, press the button again. While a song is playing,
press the RPT button
for 2 seconds or longer (until you hear abeep). The F-RPT indicator will come on and the disc will repeat all the songs in the folder that contains the s
ong currently playing.
To exit this mode, press the button again.
If the RDM button is pressed, the RDM indi- cator will come on and the tracks that are played will be selected at random. To exit this mode, press the button again. If the RDM button is pressed, the F-RDM indicator will come on and the tracks that areplayed will be select
ed at random from the
folder that is currently selected. To exit this mode, press the button again. Press the RDM button for 2 seconds or longer (until you hear a beep). The RDM indicator will come on and the tracks that are playedwill be selected at
random from all folders on
the disc currently selected. To exit this mode, press the button again.
N00752100179
This CD player can display CD text and MP3titles, including ID3 tag information. The CD player can display disc and track titles for discs with c
onverted disc and track
title information. Press the DISP buttonrepeatedly to make selections in the following sequence: disc name
 track name
 normal
display mode.
To r e p e a t t r a c k s

To repeat a track To repeat songs in the same folder (MP3 CDs only)
NOTE
 With a disc that contains both CD-DA and MP3 files, the repeat
mode causes only files
of the same format (CD-DA only or MP3 files only) to be repeated.
To change the order of tracks for playback

Random playback for a disc (music CDs only) Random playback for a folder (MP3 CDs only) Random playback for all folders on a disc (MP3 CDs only)
NOTE
 With a disc that contains both CD-DA and MP3 files, the random
mode causes only
files of the same format (CD-DA only orMP3 files only) to be played in a random sequence.
CD text and MP3 title display

CD text
NOTE
 The display can show up to 11 characters. If a disc name or track name has more than 11 characters, press the PAGE button to view the next 11 characters.  When there is no title information to be dis- played, the display
shows “NO TITLE”.
 Characters that the CD
player cannot display
are shown as “•”.
BK0212400US.book 23 ページ ２０１４年４月１日　火曜日　午後２時２１分

AM/FM electronically tuned radio with CD player (if so equipped) 7-24 Comfort controls
7
The CD player can display folder and file titles for discs with c
onverted folder and file
information. Press th
e DISP button repeat-
edly to make selections in the following sequence: folder name
 file name
 nor-
mal display mode. The CD player can display ID3 tag informa- tion for files that have been recorded withID3 tag information. 1. Press the DISP button for 2 seconds or longer to switch to
the ID3 tag informa-
tion.2. Press the DISP button repeatedly to make selections in the following sequence: album TAG
 track TAG
 artist TAG
 normal display mode.
N00702600010
Press the button to switch the clock mode. To exit the clock mode, press the button.
N00702700011
1. Press and hold the button and the clock display flashes. 2. Press the or button to adjust the “hours” digit.
MP3 titles ID3 tag information
NOTE
 To return from ID3 tag information to the folder name, press the
DISP button again for
2 seconds or longer.  When there is no title information to be dis- played, the display shows “NO TITLE”.
 The display can show up to 11 characters. If a folder name, track name
, or item of ID3 tag
information has more than 11 characters,press the PAGE button to view the next 11 characters.  Characters that the CD
player cannot display
are shown as “•”.
To display the clock

A- (Clock) button
NOTE
Example CD player mode Clock mode
NOTE
 While the clock mode is selected, the display will switch to the applicable operation dis-play whenever the CD player, external audioinput mode or radio, etc. is operated. Then, if no entries are made for 7 seconds, the dis- play will automatically return to the clockmode.
To adjust the clock

A- (Clock) button B- (Clock adjustment up) buttonC- (Clock adjustment down) button
BK0212400US.book 24 ページ ２０１４年４月１日　火曜日　午後２時２１分

AM/FM electronically tuned radio with CD player (if so equipped)
Comfort controls 7-25
7
If you keep pressing the button, fast-for- ward begins.3. When the “hours” digit is adjusted, press the button to flash the “minutes” digit.Press the or button to adjust the “minutes” digit. If you keep pressing the button, fast-for-ward begins. 4. When the time is set, press the button to stop the clock display from flashing.
N00702800012
1. Press and hold the /MENU button untilyou hear a beep. “GracenoteDB” will appear on the display. Each time the /MENU button is pressed, this switches in the order Grace- note DB, PHONE SET and cancel. 2. Press the or buttons several times to select “DB Version” and then press the
/MENU button to determine.
The Gracenote DB ve
rsion is displayed.
N00702900013
It is possible to set the language used for voice control. 1. Press and hold the /MENU button until you hear a beep. “GracenoteDB” will appear on the display. 2. Press the /MENU button to select “PHONE SET”. Then press the or buttons several times to select “LANGUAGE” and then press the /MENU button to determine.
NOTE
 Reset the time after the battery terminals are disconnected an
d reconnected.
 Seconds do not appear
in the clock display,
but after adjusting the “minutes” setting, the clock begins to operate from 0 seconds.
To confirm the version number of the Gracenote DB (vehicles with a Bluetooth
® 2.0 interface)

A-
/MENU button
B-
button
C-
button
To change the language (vehi- cles with Bluetooth
® 2.0 inter-
face)

A-
/MENU button
B-
button
C-
button
BK0212400US.book 25 ページ ２０１４年４月１日　火曜日　午後２時２１分

AM/FM electronically tuned radio with CD player (if so equipped) 7-26 Comfort controls
7
3. Press the or buttons to select “LangChg YES” and then press the
/MENU button to determine.
4. Press the or buttons to select lan- guage and then press the /MENU but- ton to determine. 5. Press the or buttons to select “LangSet YES” and then press the
/MENU button to determine.
N00703000011
You can listen to commercially available audio equipment, such
as a portable audio
system, from your vehicl
e’s speakers, by con-
necting the audio equi
pment to the auxiliary
audio connector. 1. Connect the headphone port of the porta- ble audio system to the auxiliary audio connector using a comm
ercially available
connection cord.2. Press the AUX button several times to switch to the AUX mode. The display will show “AUX” and then the external audioinput mode will be activated. 3. To deactivate the external audio input mode, press the AUX button to switch toanother mode.
To use the external audio input function

A- Auxiliary Audio connector (Mini-jack) B- AUX button C- Display
NOTE
 Use a stereo mini-jac
k connector to connect
the audio equipment to the auxiliary audio connector.
To activate the external audio input mode

CAUTION Do not operate the c
onnected audio equip-
ment while driving. This could distract
you and an accident
might occur.
NOTE
 The connected audio
equipment cannot be
adjusted using the vehicle’s audio system.  Depending on the conne
cted audio equip-
ment, it may produce noise from the speak- ers.  Use the connected audio equipment’s own power source, such as its battery.Noise may be produced from the speakers if the connected audio equipment is used while charging it using the ac
cessory socket of the
vehicle.  Do not activate the external audio input mode when no audio equipment is con- nected. Otherwise, noise may be produced from thespeakers.  Connect audio equipment when the external audio input mode is deactivated or lower the vehicle’s speaker volume before connecting it.Noise may be produced from the speakers if audio equipment is conne
cted after the exter-
nal audio input mode is activated.  Compared to the CD player mode and radio mode, the vehicle’s speaker volume will belower in the external audio input mode. Therefore, be careful when switching from the external audio input mode to the CDplayer mode or radio mode since the speaker volume will be higher.  Do not use excessive force on the connection cord. Otherwise, the
cord and connectors
may be damaged.
BK0212400US.book 26 ページ ２０１４年４月１日　火曜日　午後２時２１分

To play tracks from USB device (if so equipped)
Comfort controls 7-27
7
N00762200056
You can connect your iPod or USB memory device to the USB input terminal and playmusic files stored in the iPod or USB mem- ory device. See the following section for the types ofconnectable devices
and supported files.
Refer to “Types of connectable devices and supported file specifications” on page 5-103.See the following sections for the connecting methods, “How to conne
ct an iPod” on page
5-102 and “How to connect a USB memorydevice” on page 5-101. If your vehicle is equipped with a Bluetooth
®
2.0 interface, you can play music files in your iPod or USB memory de
vice via voice opera-
tion. Refer to “To play iPod
tracks via voice opera-
tion” on page 7-29 and “To play USB mem-
ory device tracks via voice operation” on page 7-35.
N00762300060
N00762400087
1. Press the PWR switch to turn on the audio system. The system turns on in the lastmode used. 2. Connect your iPod to the USB input ter- minal.Refer to “How to connect an iPod” on page 5-102. 3. Press the CD button several times toswitch to the iPod mode. The input mode changes as follows every time the CD but- ton is pressed: CD mode
 iPod mode
 Bluetooth
® mode (if so equipped)

AUX mode
 CD mode.
The iPod indicator are illuminated andthen the iPod mode will be activated. 4. Once the device is selected, playback starts and indicato
r appears on the dis-
play.
 If the connection cord
alone is left connected
to the auxiliary audi
o connector, noise may
be produced from the speakers.  For information on how to connect and oper- ate the commercially av
ailable audio equip-
ment, refer to the ow
ner’s manual for the
commercially availabl
e audio equipment.
To play tracks from USB device
(if so equipped)
NOTE
NOTE
 A file protected by c
opyright might not be
able to playback.  It is recommended to adjust the equalizer of the connected device to 0 db or neutral.
iPod control panel and display

1- CD (Mode changeover) button 2- RADIO button 3-
DISP (Title display)/ (Return) but- ton
4-
(USB device active) indicator
5- iPod indicator 6- Display 7- TRACK indicator8- RPT (Repeat mode) indicator
9- RDM (Random mode)/F-RDM (Folder
random mode) indicator
10- SEL (Select)
indicator
11- PAGE (Title scroll) button 12-
(Fast-reverse/Track down) button
13-
(Fast-forward/Track up) button
14- PWR (On-Off)/SEL (Select) switch 15- RPT (Repeat) button 16- RDM (Random) buttonTo play from an iPod

BK0212400US.book 27 ページ ２０１４年４月１日　火曜日　午後２時２１分