2015 MERCEDES-BENZ S-Class COUPE garage door opener

Temperature (on-board com-
puter) ............................................. 245
Viscosity ........................................3 94
ESP ®
(Electronic Stability Pro-
gram)
AMG menu (on-board computer) ... 245
Characteristics ................................. 71
Deactivating/activating ................... 72
Display message ............................ 247
ETS/4ETS ........................................ 71
Function/notes ................................ 71
General notes .................................. 71
Important safety information ........... 71
Warning lamp ................................. 283
ETS/4ETS (Electronic Traction Sys-
tem) ...................................................... 71
Exhaust
see Exhaust pipe
Exhaust check ................................... 170
Exhaust pipe
Cleaning ......................................... 331
Exterior lighting
Cleaning ......................................... 329
see Lights
Exterior mirrors
Adjusting ....................................... 114
Dipping (automatic) ....................... 115
Folding in/out (automatically) ....... 114
Folding in/out (electrically) ........... 114
Out of position (troubleshooting) ... 115
Setting ........................................... 114
Storing settings (memory func-
tion) ............................................... 117
Storing the parking position .......... 115
Eyeglasses compartment ................. 295F
Features ............................................. 298
Filler cap
see Fuel filler flap
Filling capacities (Technical data) ... 391
Flat tire
Changing a wheel/mounting the
spare whee l................................... 377
MOExtended tire s.......................... 337
Preparing the vehicle ..................... 336
TIREFIT kit ...................................... 338 Floormats
........................................... 314
Front-passenger seat
Adjusting from the driver's seat ..... 104
Fuel
Additives ........................................ 393
Consumption statistics .................. 232
Displaying the current consump-
tion ................................................ 231
Displaying the range ...................... 231
Driving tip s.................................... 170
Fuel gaug e....................................... 31
Grade (gasoline )............................ 392
Important safety notes .................. 392
Problem (malfunction) ................... 166
Refueling ........................................ 163
Tank content/reserve fue l............. 392
Fuel filler flap
Opening ......................................... 164
Fuel level
Calling up the range (on-board
computer) ...................................... 231
Fuel tank
Capacity ........................................ 392
Problem (malfunction) ................... 166
Fuses
Allocation chart ............................. 352
Before changing ............................. 351
Dashboard fuse box ....................... 351
Engine emergency stop ................. 353
Fuse box in the engine compart-
ment .............................................. 352
Fuse box in the front-passenger
footwell .......................................... 352
Fuse box in the trunk ..................... 352
Important safety notes .................. 351 G
Garage door opener Clearing the memory ..................... 314
General notes ................................ 311
Important safety notes .................. 311
Opening/closing the garage doo r..3 14
Programming (button in the rear-
view mirror) ................................... 312
Synchronizing the rolling code ....... 312
Gasoline ............................................. 392 10
Index

Function/notes ................................ 73
Important safety notes .................... 73
Warning lamp ................................
.289
PRE-SAFE ®
PLUS (anticipatory
occupant protection PLUS)
Operation ......................................... 59
Program selector button .................. 158
Protection against theft
ATA (Anti-Theft Alarm system) ......... 76
Immobilizer ...................................... 75
Protection of the environment
General notes .................................. 21
Pulling away
Automatic transmission ................. 150
General notes ................................ 150
Hill start assist ............................... 150 Q
QR code Rescue card ..................................... 27
Qualified specialist workshop ........... 25R
Radio Selecting a station ......................... 235
Radio-wave reception/transmis-
sion in the vehicle
Declaration of conformity ................ 25
Reading lamp ..................................... 125
Rear compartment
Setting the air vents ..................... .143
Stowage compartment .................. 296
Rear lamps
see Lights
Rear seats
Overview .......................................... 39
Rear view camera
Cleaning instructions ..................... 330
Function/notes ............................ .203
Switching on/off ........................... 204
Rear window blind ............................ 300
Rear window defroster
Problem (malfunction) ................... 139
Switching on/off ........................... 138
Rear-view mirror
Anti-glare (manual) ........................ 113 Dipping (automatic) ....................... 115
Recuperation display ........................ 231
Refrigerant (air-conditioning sys-
tem)
Important safety notes .................. 396
Refueling
Fuel gauge ....................................... 31
Important safety notes .................. 163
Refueling process .......................... 164
see Fuel
Remote control
Garage door opene r....................... 311
Programming (garage door
opener) .......................................... 312
Replacing bulbs
General notes ................................ 126
Reporting safety defects .................... 26
Rescue card ......................................... 27
Reserve (fuel tank)
see Fuel
Reserve fuel
Display message ............................ 266
Warning lamp ................................. 286
Residual heat (climate control) ........ 139
Restraint system
Display message ............................ 256
Introduction ..................................... 42
Warning lamp ................................. 285
Warning lamp (function) ................... 43
Reversing feature
Roller sunblind ................................. 97
Side windows ................................... 94
Trunk lid ........................................... 88
Reversing lamps (display mes-
sage) ................................................... 262
ROAD SURFACE SCAN ....................... 192
Roadside Assistance (breakdown) .... 23
Roller sunblind
Panorama roof ................................. 97
Rear window .................................. 300
Roller sunblind for the panorama
roof
Opening and closing ........................ 98
Operating ......................................... 97
Resetting ......................................... 98
Roof lining and carpets (cleaning
guidelines) ......................................... 333 Index
15

Overhead control panel
Function Page
0043
003D
Switches the left-
hand reading lamp on/off 125
0044
0033
Switches the auto-
matic interior lighting con-
trol on/off 125
0087
0053
SOS button (mbrace
system) 304
0085
004A
Switches the front
interior lighting on/off 125
0083
0042
Switches the rear
interior lighting on/off 125
0084
003D
Switches the right-
hand reading lamp on/off 125
006B
00D9
MB Info call button
(mbrace system) 306
006C
Eyeglasses compartment 295
006D
Operates the roller sun-
blind for the panorama roof 97 Function Page
006E
00B7
Operates MAGIC SKY
CONTROL 99
Vehicles without MAGIC
SKY CONTROL: operates
the roller sunblind for the
panorama roof
97
006F
Buttons for the garage door
opener 312
0070
Microphone for mbrace
(emergency call system),
telephone and the Voice
Control System; see the
separate operating instruc-
tions
0071
0052
Breakdown assis-
tance call button (mbrace
system) 305Overhead control panel
37At a glance

The data you receive contains the following
information:
R the location where the speed limit was
exceeded
R the time at which the speed limit was
exceeded
R the selected speed limit which was excee-
ded
Geo fencing Geo fencing allows you to select areas which
the vehicle should not enter or leave. You will
be informed if the vehicle crosses the boun-
daries of the selected areas. You can select
the way in which you receive this information beforehand. Possible options include text
message, e-mail or an automated call.
The area can be determined as either a circle
or a polygon with a maximum of ten corners.
You can specify up to ten areas simultane-
ously. Different settings are possible for each area.
These settings can be called up under "Own-
ers Online" at http://www.mbusa.com.
Alternatively, you can trigger an MB Info call
and inform the customer service representa-
tive that you wish to activate geo fencing.
Currently inactive areas can be activated by
text message.
Triggering the vehicle alarm With this function, you can trigger the vehi-
cle's panic alarm via text message. An alarm
sounds and the exterior lighting flashes.
Depending on the setting, the panic alarm
lasts five or ten seconds. Afterwards, the
alarm switches off. Garage door opener
General notes The HomeLink
®
garage door opener integra-
ted in the rear-view mirror allows you to oper- ate up to three different door and gate sys-
tems.
Use the integrated garage door opener only
on garage doors that:
R have safety stop and reverse features and
R meet current U.S. federal safety standards
Once programed, the integrated garage door opener in the rear-view mirror will assume the
function of the garage door system's remote
control. Please also read the operating
instructions for the garage door system.
When programming a garage door opener,
park the vehicle outside the garage. Do not
run the engine while programming.
Certain garage door drives are incompatible
with the integrated garage door opener. If you
have difficulty programing the integrated
garage door opener, contact an authorized
Mercedes-Benz Center.
Alternatively, you can call the following tele-
phone assistance services:
R USA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
R Canada: Customer Service at
1-800-387-0100
R HomeLink ®
hotline 1-800-355-3515 (free
of charge)
More information on HomeLink ®
and/or
compatible products is also available online
at http://www.homelink.com.
Notes on the declaration of conformity
(Y page 25).
USA: FCC ID: CB2HMIHL4
Canada: IC: 279B-HMIHL4
Important safety notes G
WARNING
When you operate or program the garage door with the integrated garage door opener, per-
sons in the range of movement of the garage
door can become trapped or struck by the
garage door. There is a risk of injury. Features
311Stowage and features
Z

When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door.
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces with-
out sufficient ventilation.
Programming Programming buttons
Pay attention to the "Important safety notes"
(Y page 311). Garage door remote control
0083is not inclu-
ded with the integrated garage door opener.
X Turn the SmartKey to position 2in the igni-
tion lock (Y page 147).
X Select one of buttons 0044to0085 to use to
control the garage door drive.
X To start programming mode: press and
hold one of buttons 0044to0085 on the inte-
grated garage door opener.
The garage door opener is now in program-
ming mode. After a short time, indicator
lamp 0043lights up yellow.
Indicator lamp 0043lights up yellow as soon
as button 0044,0087or0085 is programmed for
the first time. If the selected button has
already been programmed, indicator lamp
0043will only light up yellow after ten
seconds have elapsed.
X Release button 0044,0087or0085. Indicator
lamp 0043flashes yellow.
X To program the remote control: point
garage door remote control 0083towards
buttons 0044to0085 on the rear-view mirror at
a distance of 2 to 8 inches (5 to 20 cm).
X Press and hold button 0084on remote control
0083 until indicator lamp 0043lights up green.
When indicator lamp 0043lights up green:
programming is finished.
When indicator lamp 0043flashes green: pro-
gramming was successful. The next step is to synchronize the rolling code
(Y page 312).
X Release button 0084on remote control 0083for
the garage door drive system.
If indicator lamp 0043lights up red: repeat the
programing procedure for the correspond-
ing button on the rear-view mirror. When
doing so, vary the distance between remote control 0083and the rear-view mirror.
The required distance between remote
control 0083and the integrated garage door
opener depends on the garage door drive
system. Several attempts might be neces-
sary. You should test every position for at
least 25 seconds before trying another
position.
Synchronizing the rolling code
Pay attention to the "Important safety notes"
(Y page 311).
If the garage door system uses a rolling code,
you will also have to synchronize the garage
door system with the integrated garage door
opener in the rear-view mirror. To do this you
will need to use the programming button on
the door drive control panel. The program-
ming button may be positioned at different
locations depending on the manufacturer. It
is usually located on the door drive unit on the garage ceiling.
Familiarize yourself with the garage door
drive operating instructions, e.g. under "Pro- 312
FeaturesStowage and features

gramming of additional remote controls",
before carrying out the following steps.
Your vehicle must be within reach of the
garage door or gate opener drive. Make sure
that neither your vehicle nor any persons/
objects are present within the sweep of the
door or gate.
X Turn the SmartKey to position 2in the igni-
tion lock (Y page 147).
X Get out of the vehicle.
X Press the programming button on the door
drive unit.
Usually, you now have 30 seconds to ini-
tiate the next step.
X Get into the vehicle.
X Press previously programmed button 0044,
0087 or0085 on the integrated garage door
opener until the door closes.
The rolling code synchronization is then
complete.
Notes on programming the remote con-
trol
Canadian radio frequency laws require a
"break" (or interruption) of the transmission
signals after broadcasting for a few seconds. Therefore, these signals may not last long
enough for the integrated garage door
opener. The signal is not recognized during
programming. Comparable with Canadian
law, some U.S. garage door openers also fea-
ture a "break".
Proceed as follows:
R if you live in Canada
R if you have difficulties programming the
garage door opener (regardless of where
you live) when using the programming
steps
X Press and hold one of buttons 0044to0085 on
the integrated garage door opener.
After a short time, indicator lamp 0043lights
up yellow.
X Release the button.
Indicator lamp 0043flashes yellow. X
Press button 0084of garage door remote
control 0083for two seconds, then release it
for two seconds.
X Press button 0084again for two seconds.
X Repeat this sequence on button 0084of
remote control 0083until indicator lamp 0043
lights up green.
When indicator lamp 0043lights up green:
programming is finished.
When indicator lamp 0043flashes green: pro-
gramming was successful. The next step is to synchronize the rolling code.
X Release button 0084of remote control 0083of
the garage door drive.
If indicator lamp 0043lights up red: repeat the
programming process for the correspond-
ing button on the rear-view mirror. When
doing so, vary the distance between remote
control 0083and the rear-view mirror.
The required distance between remote
control 0083and the integrated garage door
opener depends on the garage door drive
system. Several attempts might be neces-
sary. You should test every position for at
least 25 seconds before trying another
position.
Problems when programming
If you are experiencing problems programing
the integrated garage door opener on the
rear-view mirror, take note of the following
instructions:
R Check the transmitter frequency used by
garage door drive remote control 0083and
whether it is supported. The transmitter
frequency can usually be found on the back
of the garage door drive remote control.
The integrated garage door opener is com-
patible with devices that have units which
operate in the frequency range of 280 to
433 MHz.
R Replace the batteries in garage door
remote control 0083. This increases the like-
lihood that garage door remote control 0083
will transmit a strong and precise signal to the integrated garage door opener. Features
313Stowage and features Z

R
When programming, hold remote control
0083 at varying distances and angles from the
button which you are programming. Try var- ious angles at a distance between 2and
12 inches (5to 30 cm) or at the same angle
but at varying distances.
R If another remote control is available for the
same garage door drive, repeat the same
programming steps with this remote con-
trol. Before performing these steps, make
sure that new batteries have been installed in garage door drive remote control 0083.
R Note that some remote controls only trans-
mit for a limited amount of time (the indi-
cator lamp on the remote control goes out). Press button 0084on remote control 0083again
before transmission ends.
R Align the antenna cable of the garage door
opener unit. This can improve signal recep- tion/transmission.
Opening/closing the garage door After it has been programmed, the integrated
garage door opener performs the function of
the garage door system remote control.
Please also read the operating instructions
for the garage door system.
X Turn the SmartKey to position 2in the igni-
tion lock (Y page 147).
X Press button 0044,0087or0085 which you have
programmed to operate the garage door.
Garage door system with a fixed code: indi-
cator lamp 0043lights up green.
Garage door system with a rolling code:
indicator lamp 0043flashes green.
The transmitter will transmit a signal as
long as the button is pressed. The trans-
mission is halted after a maximum of ten
seconds and indicator lamp 0043lights up
yellow.
X Press button 0044,0087or0085 again if neces-
sary. Clearing the memory Make sure that you clear the memory of the
integrated garage door opener before selling
the vehicle.
X Turn the SmartKey to position 2in the igni-
tion lock (Y page 147).
X Press and hold buttons 0044and 0085.
The indicator lamp initially lights up yellow
and then green.
X Release buttons 0044and 0085.
The memory of the integrated garage door
opener in the rear-view mirror is cleared. Floormats
G
WARNING
Objects in the driver's footwell can restrict the pedal travel or obstruct a depressed pedal.
The operating and road safety of the vehicle is
jeopardized. There is a risk of an accident.
Make sure that all objects in the vehicle are
stowed correctly, and that they cannot enter
the driver's footwell. Install the floormats
securely and as specified in order to ensure
sufficient clearance for the pedals. Do not use loose floormats and do not place floormats on
top of one another. X
Driver's seat/front-passenger seat:
slide the respective seat back.
X Rear seats: slide the respective seat for-
wards.
X To install: place the floormat in the foot-
well. 314
FeaturesStowage and features