2015 MERCEDES-BENZ GLA-Class App

[x] Cancel search: App

Page 79 of 374

MERCEDES-BENZ GLA-Class 2015 X156 Owners Manual The turn signals flash once when unlocking
and three times when locking.
i When it is dark, the surround lighting also
comes on if it is activated in the on-board
computer (Y page 216).
i You can also

Page 86 of 374

MERCEDES-BENZ GLA-Class 2015 X156 Owners Manual i
The opening dimensions of the tailgate
can be found in the "Vehicle data" section
(Y page 368).
You should preferably place luggage or loads
in the cargo compartment. Observe the load-
ing guideline

Page 87 of 374

MERCEDES-BENZ GLA-Class 2015 X156 Owners Manual Opening/closing automatically from
outside
Important safety notes G
WARNING
Parts of the body could become trapped dur-
ing automatic closing of the tailgate. More-
over, people, e.g. children, may be

Page 89 of 374

MERCEDES-BENZ GLA-Class 2015 X156 Owners Manual You can reach the emergency release via the
cargo compartment. Fold the rear backrests
forward (Y page 270).
X Take the mechanical key out of the Smart-
Key (Y page 77). X
Insert mechanical key 0044fu

Page 90 of 374

MERCEDES-BENZ GLA-Class 2015 X156 Owners Manual 0043
Front left
0044 Front right
0087 Rear right
0085 Rear left
i When the override feature for the side
windows is activated (Y page 64), the side
windows cannot be operated from the rear.
X Turn the

Page 92 of 374

MERCEDES-BENZ GLA-Class 2015 X156 Owners Manual Problems with the side windows
G
WARNING
If you close a side window again immediately after it has been blocked or reset, the side window
closes with increased or maximum force. The reversing feature

Page 93 of 374

MERCEDES-BENZ GLA-Class 2015 X156 Owners Manual G
WARNING
At high speeds the raised sliding sunroof auto- matically lowers slightly at the rear. This could
trap you or other persons. There is a risk of
injury. Make sure that nobody reaches into
the

Page 94 of 374

MERCEDES-BENZ GLA-Class 2015 X156 Owners Manual i
If you press/pull the
0057switch beyond
the point of resistance, automatic opera-
tion is started in the corresponding direc-
tion. You can stop automatic operation by
pressing/pulling the switch ag