2015 MERCEDES-BENZ E-Class SEDAN fold seats

Function/notes ............................. 206
Important safety notes .................. 206
Problem (malfunction) ................... 209
Range of the sensors ..................... 206
Warning display ............................. 207
PASSENGER AIR BAG OFF
Indicator lamp .................................. 43
Problems (malfunction) .................. 260
Pets in the vehicle ............................... 68
Plastic hooks ..................................... 300
Plastic trim (cleaning instruc-
tions) .................................................. 341
Power washers .................................. 337
Power windows see Side windows
PRE-SAFE ®
(anticipatory occupant
protection) Display messag e............................ 255
Operation ......................................... 60
PRE-SAFE ®
Brake
Activating/deactivating ................. 241
Display message ............................ 256
Function/note s................................ 78
Important safety notes .................... 78
Warning lamp ................................. 289
PRE-SAFE ®
PLUS (anticipatory
occupant protection PLUS) Operation ......................................... 61
Program selector button .................. 169
Protection against theft ATA (Anti-Theft Alarm system) ......... 81
Immobilizer ...................................... 80
Protection of the environment
General notes .................................. 23
Pulling away
Automatic transmission ................. 160
General notes ................................ 160 Q
Qualified specialist workshop ........... 27R
RACE START (AMG vehicles) ............. 201
RACETIMER (on-board computer) .... 248
Radiator cover ................................... 331 Radio
Selecting a station ......................... 238
see separate operating instructions
Radio-wave reception/transmis-
sion in the vehicle
Declaration of conformity ................ 27
Reading lamp ..................................... 133
Rear compartment Setting the airflow ......................... 150
Setting the air vents ...................... 154
Setting the temperature ................ 149
Rear fog lamp
Display message ............................ 262
Switching on/of f........................... 130
Rear seats
Display message ............................ 277
Folding the backrest forwards/
back ............................................... 297
Rear sill protector ............................. 307
Rear view camera Cleaning instructions ..................... 340
Function/note s............................. 214
Switching on/of f........................... 214
Rear-view mirror
Anti-glare (manual) ........................ 122
Dipping (automatic) ....................... 124
Rear window blind ............................ 312
Rear window defroster Problem (malfunction) ................... 152
Switching on/of f........................... 151
Rear window wiper
Replacing the wiper blad e.............. 138
Switching on/of f........................... 137
Refrigerant (air-conditioning sys-
tem)
Important safety notes .................. 418
Refueling
Fuel gaug e....................................... 33
Important safety notes .................. 173
Refueling process .......................... 174
see Fuel
Remote control
Garage door opener ....................... 324
Programming (garage door
opener) .......................................... 325 16
Index

Replacing bulbs
Important safety notes .................. 134
Overview of bulb types .................. 135
Reporting safety defects .................... 28
Reserve (fuel tank) see Fuel
Reserve fuel
Display messag e............................ 267
Warning lamp ................................. 286
see Fuel
Residual heat (climate control) ........ 152
Restraint system Display message ............................ 257
Introduction ..................................... 42
Warning lamp ................................. 285
Warning lamp (function) ................... 43
Reverse gear
Engaging (automatic transmis-
sion) ............................................... 165
Reversing feature
Panorama sliding sunroof .............. 104
Roller sunblind s............................. 106
Side windows ................................... 99
Sliding sunroof ............................... 104
Trunk lid/tailgate ............................. 92
Reversing lamps (display mes-
sage) ................................................... 262
Roadside Assistance (breakdown) .... 25
Roller sunblind Panorama roof with power tilt/
sliding panel .................................. 105
Rear side window s......................... 311
Rear window .................................. 312
Roof carrier ........................................ 308
Roof lining and carpets (cleaning
guidelines) ......................................... 342
Roof load (maximum) ........................ 419S
Safety Children in the vehicle ..................... 62
Child restraint systems .................... 63
Occupant Classification System
(OCS) ............................................... 52
Safety system
see Driving safety systems Seat belts
Adjusting the driver's and front-
passenger seat belt ......................... 47
Adjusting the height ......................... 46
center rear-compartment sea t......... 47
Cleaning ......................................... 342
Correct usage .................................. 45
Fastening ......................................... 46
Important safety guidelines ............. 44
Introduction ..................................... 44
Releasing ......................................... 47
Switching belt adjustment on/off
(on-board computer) ...................... 246
Warning lamp ................................. 280
Warning lamp (function) ................... 48
Seats
Adjusting (electrically) ................... 112
Adjusting the 4-way lumbar sup-
port ................................................ 115
Adjusting the active multicontour
seat ............................................... 114
Adjusting the head restraint .......... 112
Cleaning the cover ......................... 341
Correct driver's seat position ........ 110
Folding the backrest (rear com-
partment) forwards/back .............. 299
Important safety notes .................. 111
Overview ........................................ 111
Seat heating problem .................... 118
Seat ventilation problem ................ 119
Storing settings (memory func-
tion) ............................................... 125
Switching seat heating on/of f....... 117
Switching seat ventilation on/of f.. 118
Selector lever
Cleaning ......................................... 341
Sensors (cleaning instructions) ....... 340
Service menu (on-board com-
puter) .................................................. 243
Service products Brake fluid ..................................... 416
Coolant (engine) ............................ 417
DEF special additives ..................... 415
Engine oil ....................................... 415
Fuel ................................................ 412
Important safety notes .................. 411 Index
17

Door control panel
Function Page
0043
008D
003700380040
Stores settings for the seat, exterior mirrors and steer-
ing wheel 125
0044
Adjusts the seats electri-
cally
112
0087
00360037Unlocks/locks
the vehicle 90
0085
Opens the door 89
0083
0062007000F50071
Adjusts and folds the exte-
rior mirrors in/out electri-
cally
122 Function Page
0084
0062
Opens/closes the
side windows 100
006B
0089
Activates/deacti-
vates the override feature
for the side windows in the
rear compartment 68
006C
008B
Opens/closes the
trunk lid/tailgate 9640
Door control panelAt a glance

Wagon:
you can also adjust the belt height on
the outer rear bench seats.
The shoulder section of the seat belt must
always be routed across the center of the
shoulder. Adjust the belt outlet if necessary.
X To raise: slide the belt outlet upwards.
The belt outlet will engage in various posi-
tions.
X To lower: hold belt outlet release 0043and
slide the belt outlet downwards.
X Let go of belt outlet release 0043in the
desired position and make sure that the
belt outlet engages.
All seat belts in the vehicle with the exception of the driver's seat belt and the seat belt on
the folding bench seat in the cargo compart-
ment are equipped with a special seat belt
retractor, to which a child restraint system
can be secured. Further information can be
found under "Special seat belt retractor"
(Y page 63).
Seat belt for the center rear seat If the left-hand rear seat backrest is folded
down and back up again, the rear center seat
belt may lock. The seat belt can then not be
pulled out.
X To release the rear center seat belt: pull
the seat belt out approximately 1 in
(25 mm) at the belt outlet on the backrest
and then release it again.
The seat belt is retracted and released. Releasing seat belts !
Make sure that the seat belt is fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped in the door or in the seat
mechanism. This could damage the door,
the door trim panel and the seat belt. Dam- aged seat belts can no longer fulfill their
protective function and must be replaced.
Visit a qualified specialist workshop. X
Press release button 0043, hold belt
tongue 0044firmly and guide it back towards
belt outlet 0087.
Seat belt adjustment The seat-belt adjustment is an integral part of
the PRE-SAFE ®
convenience function. This
function adjusts the driver's and front-
passenger seat belt to the upper body of the
occupants.
The belt strap is tightened slightly when:
R the belt tongue is engaged in the buckle
and
R the ignition is switched on
The seat-belt adjustment will apply a certain
retraction force if any slack is detected
between the vehicle occupant and the seat
belt. Do not hold on to the seat belt tightly
while it is adjusting. Occupant safety
47Safety Z

When installing the LATCH-type (ISOFIX) child
restraint system, fold protective caps 0044of
LATCH-type (ISOFIX) securing rings 0043
inwards.
X Install the LATCH-type (ISOFIX) child
restraint system on both LATCH-type (ISO-
FIX) securing rings 0043.
ISOFIX is a standardized securing system for
specially designed child restraint systems on
the rear seats. LATCH-type (ISOFIX) securing
rings 0043for two LATCH-type (ISOFIX) child
restraint systems are installed on the left and
right rear seats.
Non-LATCH-type (ISOFIX) child seats may
also be used and can be installed using the
vehicle's seat belt system. Install child seats
according to the manufacturer's instructions. Top Tether
Introduction Top Tether provides an additional connection
between the child restraint system secured
with a LATCH-type (ISOFIX) child seat mount
and the vehicle. This helps reduce the risk of
injury even further. If the child restraint sys-
tem is equipped with a Top Tether belt, this
should always be used.
Important safety notes G
WARNING
If the rear seat backrests are not locked, they
could fold forwards in the event of an acci-
dent, heavy braking or sudden changes of direction. As a result, child restraint systems
cannot perform their intended protective
function. Rear seat backrests that are not
locked can also cause additional injuries, e.g.
in the event of an accident. This poses an
increased risk of injury or even fatal injury.
Always lock rear seat backrests after instal-
ling a Top Tether belt. Observe the lock veri-
fication indicator. Adjust the rear seat backr-
ests so that they are in an upright position.
If the rear seat backrest is not engaged and
locked, this will be shown in the multifunction
display in the instrument cluster. A warning
tone also sounds.
Top Tether anchorages Sedan
The Top Tether anchorage points are installed
in the rear compartment behind the head
restraints. X
Move head restraint 0043upwards.
X Fold up cover 0044of Top Tether anchorage
0083. Children in the vehicle
65Safety Z

X
Install the LATCH-type (ISOFIX) child
restraint system with Top Tether. Always
comply with the child restraint system
manufacturer's installation instructions
when doing so.
X Route Top Tether belt 0087under head
restraint 0043between the two head restraint
bars.
X Hook Top Tether hook 0085into Top Tether
anchorage 0083.
X Make sure that Top Tether belt 0087is not
twisted.
X Tension Top Tether belt 0087. Always comply
with the child restraint system manufactur- er's installation instructions when doing so.
X Fold down cover 0044of Top Tether anchor-
age 0083.
X Move head restraint 0043back down again
slightly if necessary (Y page 113). Make
sure that you do not interfere with the cor-
rect routing of Top Tether belt 0087.
Wagon
The Top Tether anchorages are located on the rear side of the rear seat backrests. X
Move head restraint 0043upwards.
X Remove combined cargo cover and net 0087
(Y page 300).
X Install the LATCH-type (ISOFIX) child
restraint system with Top Tether. Always
comply with the child restraint system
manufacturer's installation instructions
when doing so.
X Route Top Tether belt 0084under head
restraint 0043between the two head restraint
bars.
X Hook Top Tether hook 0083into Top Tether
anchorage 0085on the back of rear seat
backrest 0044.
X Make sure that Top Tether belt 0084is not
twisted.
X Tension Top Tether belt 0084. Always comply
with the child restraint system manufactur- er's installation instructions when doing so.
X Move head restraint 0043back down again
slightly if necessary (Y page 113). Make
sure that you do not interfere with the cor- rect routing of Top Tether belt 0084.
X Install combined cargo cover and net 0087
(Y page 300). Child restraint system on the front-
passenger seat
General notes Accident statistics show that children
secured in the rear seats are safer than chil-
dren secured in the front-passenger seat. For
this reason, Mercedes-Benz strongly advises
that you install the child restraint system on a
rear seat.
If it is absolutely necessary to install a child
restraint system on the front-passenger seat,
be sure to observe the instructions and safety
notes on the "Occupant Classification System (OCS)" (Y page 52). 66
Children in the vehicleSafety

!
Make sure that there are no objects in the
footwell under or behind the seats when
moving the seats back. There is a risk that
the seats and/or the objects could be dam- aged.
i The head restraints in the front seats are
installed with the NECK-PRO system
(Y page 59). For this reason, it is not pos-
sible to remove the head restraints from
the front seats.
Vehicles without the through-loading fea-
ture: the head restraints cannot be
removed from the rear compartment seats.
For more information, contact a qualified
specialist workshop. Adjusting the seats
0043
Head restraint height
0044 Seat cushion angle
0087 Seat height
0085 Seat fore-and-aft adjustment
0083 Backrest angle
i If PRE-SAFE ®
is activated and the front-
passenger seat is in an unfavorable posi-
tion, it is moved to a better position.
i You can store the seat settings using the
memory function (Y page 125).
i Vehicles with the through-loading fea-
ture: if you fold down a rear seat backrest,
the respective front seat is moved forwards slightly if necessary. This prevents the
seats from colliding. Adjusting the head restraints
Important safety notes G
WARNING
You could lose control of your vehicle if you do the following while driving:
R adjust the driver's seat, head restraint,
steering wheel or mirrors
R fasten the seat belt
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirror and fasten your seat belt before starting the engine. G
WARNING
If head restraints are not installed and adjus-
ted correctly, they cannot provide protection
as intended. There is an increased risk of
injury in the head and neck area, e.g. in the
event of an accident or when braking.
Always drive with the head restraints instal-
led. Before driving off, make sure for every
vehicle occupant that the center of the head
restraint supports the back of the head at
about eye level.
Do not rotate the head restraints of the front and rear seats. Otherwise, you cannot adjust
the height and angle of the head restraints to
the correct position.
Using the fore-and-aft adjustment, adjust the head restraint so that it is as close as possibleto your head.
Observe the important safety notes regarding
the seats (Y page 111).112
SeatsSeats, steering wheel and mirrors

X
To raise: pull the head restraint up to the
desired position.
X To lower: press release catch 0043and push
the head restraint down until it is in the
desired position.
i If you pull the head restraint forward
slightly, you will require less effort when
making adjustments.
Adjusting the rear seat head restraint
angle Example: Sedan
X Pull or push the top of the head restraint
until it is in the desired position.
Removing and installing the rear seat
head restraints G
WARNING
If head restraints are not installed and adjus-
ted correctly, they cannot provide protection
as intended. There is an increased risk of
injury in the head and neck area, e.g. in the
event of an accident or when braking.
Always drive with the head restraints instal-
led. Before driving off, make sure for every
vehicle occupant that the center of the head
restraint supports the back of the head at
about eye level. Example: Sedan
The rear head restraints can only be removed and re-installed on vehicles with the through-
loading facility.
X Release the rear seat backrest and fold it
slightly forwards (Y page 297).
X To remove: pull the head restraint up to
the stop.
X Press release catch 0043and pull the head
restraint out of the guides.
X To re-install: replace the head restraint so
that the notches on the bar are on the left
when viewed in the direction of travel.
X Push the head restraint down until you hear
it engage in position.
X Fold back the rear seat backrest until it
engages. Adjusting the active multicontour
seat
The active multicontour seat is only available
for the driver's side.
You can set the active multicontour seat
using COMAND. You can find further infor-
mation in the separate COMAND Operating
Instructions. 114
SeatsSeats, steering
wheel and mirrors