2015 MERCEDES-BENZ C-CLASS COUPE remove seats

R
seats
R dashboard
R instrument cluster
R centre console
Do not install accessories such as audios ys-
tems in these areas. Do not carry out repairs
or welding. You could impair the operating
efficiency of the restraint systems.
Have accessories retrofitted at aqualified
specialist workshop.
You could jeopardise the operating safety of
your vehicle if you use parts, tyres and wheels as well as accessories relevant to safety which
have not been approved by Mercedes-Benz.T his
could lead to malfunctions in safety-relevant
systems, e.g. the brake system. Only use genu-
ine Mercedes-Benz parts or parts of equalq ual-
ity. Only use tyres, wheels and accessories that
have been specifically approved for your vehi-
cle.
Mercedes-Benz tests genuine parts and conver-
sion parts and accessories that have been spe-
cifically approved for your vehicle for their reli-
ability, safety and suitability. Despite ongoing
market research, Mercedes-Benz is unable to
assess other parts. Mercedes-Benz therefore
accepts no responsibility for the use of such
parts in Mercedes-Benz vehicles, even if they
have been officially approved or independently
approved by atesting centre.
In Germany, certain parts are only officially
approved for installation or modification if they
comply with legal requirements. This also
applies to some other countries. All genuine
Mercedes-Benz parts meet the approval
requirements. The use of non-approved parts
may invalidate the vehicle's general operating
permit.
This is the case:
R if they cause achange of the vehicle type from
that for which the vehicle's general operating permit was granted
R if other road users could be endangered
R if the emission or noise levels are adversely
affected
Always specify the vehicle identification number (VIN) (Y page 370) when ordering genuine
Mercedes-Benz parts. Owner's Manual
Vehicle equipment
i This Owner's Manual describes all models
and all standard and optional equipment
available for your vehicle at the time of pub-
lication of the Owner's Manual.C ountry-spe-
cific differences are possible.N ote that your
vehicle may not be fitted with all features
described. This is also the case for systems
and functions relevant to safety. Therefore,
the equipment on your vehicle may differ from
that in the descriptions and illustrations.
The original purchase contract documentation
for your vehicle contains alist of all of the sys-
tems in your vehicle.
Should you have any questions concerning
equipment and operation, please consult a
Mercedes-Benz Service Centre.
The Owner's Manual and Service Booklet are
important documents and should kept in the
vehicle. Operating safety
Important safety notes
G
WARNING
If you do not have the prescribed service/
maintenance work or necessary repairs car-
ried out, this could result in malfunctions or
system failures. There is arisk of an accident.
Always have the prescribed service/mainte-
nance work as well as necessary repairs car-
ried out at aqualified specialist workshop. G
WARNING
Flammable material such as leaves, grass or
twigs may ignite if they come into contact with hot parts of the exhaust system. There is arisk
of fire.
When driving off road or on unpaved roads,
check the vehicle's underside regularly. In
particular, remove parts of plants or other
flammable materials which have become
trapped. In the case of damage, contact a
qualified specialist workshop. 26
Operating safetyIntroduction

Suitability of the seats for attaching
abelt-secured child restraint system If you use
ababy car seat of category 0or0+orarearward-facing child restraint system of category
Ionar ear seat, you must adjust the driver's or front-passenger seat so that the seat does not touch
the child restraint system.
If you use acategory I, forward-facing child restraint system, you should remove the head restraint
from the respective seat, if possible (Y page 106). The backrest of the child restraint system must,
as far as possible, lie flat against the backrest of the seat.
Make sure that the child's feet do not touch the front seat. If necessary, move the front seat forward slightly.
For certain child restraint systems in weight categories II or III, this can mean that the area of use is restricted. The maximum size settingoft he child restraint system is not possible due to possible
contact with the roof.
Always observe the notes in the "Childr estraint system" section (Ypage 56) and the child restraint
system manufacturer's installation instructions.
When you remove the child restraint system you must replace the head restraint sagain immediately
(Y page 105). All vehicle occupants must adjust their head restraint scorrectly before beginning the
journey.
Legend for the table:
XS eat which is unsuitable for children in this weight category.
US uitable for child restraint systems in th e"Universal" categor ytha ta re approve dfor use in this
weigh tcategory.
UF Suitable for forward-facing child restraint systems that belon gtothe"Universal" categor yand
are approve dfor use in this weigh tcategory.
LS uitable for child restraint systems as recommended; see th e"Recommended child restraint
systems "table (Y page 64). Suitable for semi-universal child restraint systems if th evehicle
and th eseat are listed in th echild restraint system manufacturer' svehicle model list. Weigh
tcategory Front-passenger seat Rea
rseat Front-
passenger
front airbag enabled Front-
passenger
front airbag
deactivated 1 Left
,right 0
up to 10 kg X U, L U, L
0+
up to 13 kg X U, L U, L
I
9kgto18kg UF
,L U, L U, L
II
15 kg to 25 kg U, L U, L U, L
III
22 kg to 36 kg U, L U, L U, L
Suitabilit
yoftheseat sfor attaching ISOFIX child restraint systems If you use
ababy car seat of categor y0or0+orarearward-facing child restraint system of category
Ionar ear seat ,you must adjust th edriver' sorfront-pa ssenger seat so that th eseat does no ttou ch
th ec hild restraint system.
1 The vehicle is equipped wit hanautomatic front-passenger fron tairba gdeactivation system. The PASSENGER
AI RB AG OFFindicator lamp must be lit. 62
Children in th
evehicleSafety

If you use
acategory I, forward-facing child restraint system, you shouldr emove the head restraint
from the respective seat, if possible (Y page 106). The backrest of the child restraint system must,
as far as possible, lie flat against the backrest of the seat.
Alwayso bserve the notes in the "Child restraint system" section (Y page 56) and the child restraint
system manufacturer's installation instructions.
When you remove the child restraint system you must replace the head restraints again immediately (Y page 105). All vehicle occupants must adjust their head restraints correctly before beginning the
journey.
Make sure that the child's feet do not touch the front seat. If necessary ,move the front seat forward
slightly.
For certain child restraint systems in weight categories II or III, this can mean that the area of use
is restricted. The maximum size setting of the child restraint system is not possible due to possible
contact with the roof.
Legend for the table:
XI SOFIX position that is not suitabl efor ISOFIX chil drestraint systems in this weight category
and/or size category.
IUF Suitable for forward-facing ISOFIX chil dseats ecuring systems that belong to the "Universal"
categor ywhich are approved for us einthis weigh tcategory.
IL Suitable for ISOFIX chil drestraint systems as recommended; see the "Recommended child
restraint systems "table (Y page 64).
The manufacturer will also recommend asuitabl eISOFIX chil drestraint system. For this ,your
vehicl eand the sea tmustb elisted in the chil drestraint system manufacturer' smodel list. For
more information, contac tthe chil drestraint system manufacturer or visit thei rwebsite. Weight category Size category Equipment Rear seat left,
right
Carry-cot
F ISO/L1 X
G ISO/L2 X
0
up to 10 kg up to approx.
6m
onths E ISO/R1 IL
0+
up to 13 kg up to approx.
15 months E ISO/R1 IL
D ISO/R2 IL
C ISO/R3
IL
2 I
9t
o18kga pprox. 9months to
4y ears D ISO/R2 IL
C ISO/R3
IL
2 B ISO/F2 IUF
B1 ISO/F2X IUF
A ISO/F3 IUF
The chil
drestraint system mus tnot touch the roo forbeputunder strain by the hea drestraints.
Adjust the hea drestraint position accordingly .Also observe the chil drestraint system manufac-
turer's installation instructions.
2 If yo uare using achildr estraint system of size categor yC(ISO/R3) ,move the front sea ttothe highes tposition
and move the backres ttoanupright position. Make sure that the front sea tbackres tdoesn ot rest against the
chil drestraint system. Childre
ninthe vehicle
63Safety Z

Suitability of the seats for attaching an i-Size child restraint system
If you use
ababy car seat of category 0or0+orarearward-facing child restraint system of category
Ionar ear seat, you must adjust the driver's or front-passenger seat so that the seat does not touch
the child restraint system.
If you use acategory I, forward-facing child restraint system, you should remove the head restraint
from the respective seat, if possible (Y page 106). The backrest of the child restraint system must,
as far as possible, lie flat against the backrest of the seat.
Always observe the notes in the "Childr estraint system" section (Ypage 56) and the child restraint
system manufacturer's installation instructions.
Make sure that the child's feet do not touch the front seat. If necessary, move the front seat forward
slightly.
When you remove the child restraint system you must replace the head restraint sagain immediately
(Y page 106). All vehicle occupants must adjust their head restraint scorrectly before beginning the
journey.
Legend for the table:
XS eat which is unsuitable for i-Siz echild restraint systems in the "Universal" category.
i‑US uitable for aforward or rearward-facing i-Size child restraint system in th e"Universal" cate-
gory. Seat
Front-
passenger seat Rea
rseat Left Right
i‑Si
ze child restraint sys-
tems X i‑U i
‑U Recommended child restraint systems
General notes Always observ
ethe informatio nin"Child restraint systems on th efront-pa ssenger seat "(Ypage 59)
and in "Suitable positionin gofthechild restraint system" (Y page 60).
You can obtain further informatio nabout th ecorrec tchild restraint system from any Mercedes-Benz
Servic eCentre. 64
Children in th
evehicleSafety

G
WARNING
If the driver's seat is not correctly engaged, it coul dunexpectedly move while driving. This
coul dcausey ou to lose control of the vehicle.
There is arisk of an accident.
Always ensure that the driver's seat is
engaged before starting the vehicle. G
WARNING
You coul dlose control of the vehicl ewhile
driving if you:
R adjust the driver's seat, steering whee lor
mirrors
R fasten the seat belt
There is arisk of an accident.
Adjust the driver's seat, headr estraint, steer-
ing whee land mirrors and fasten yours eat
beltb efore starting the engine. G
WARNING
If you adjust the seat height carelessly, you or other vehicl eoccupants coul dbetrappe dand
thereby injured .Childre ninparticular could
accidentally press the electrica lseat adjust-
ment buttons and become trapped. There is a
risk of injury.
Whil emoving the seats, make sure that your
hands or other body parts do not get under the
leve rassembly of the seat adjustment sys-
tem. G
WARNING
The headr estraints cannot provid ethe inten-
ded protection unless they are fitted and
adjusted correctly. There is an increased risk of injury to the heada nd neck in the event of
an accident or sudden braking, for example.
Always drive with the headr estraints fitted.
Ensure that the centre of the headr estraints
support the back of each vehicl eoccupant's
headate ye levelbefore driving off. G
WARNING
The seat beltd oes not offer the intended level
of protection if you have not moved the back- rest to an almost vertical position. When brak-
ing or in the event of an accident, you could
slid eunderneath the seat belta nd sustain
abdomen or neck injuries, for example. This
poses an increased risk of injury or even fatal
injury.
Adjust the seat properly before beginning
yourj ourney .Always ensure that the backrest
is in an almost vertical position and that the
shoulders ection of yours eatbelt is routed
across the centre of yours houlder.
! To avoi
ddamage to the seats and the seat
heating, observe the following information:
R do not spil lany liquidsont he seats. If liquid
is spilled on the seats, dry them as soon as possible.
R if the seat covers are damp or wet, do not
switch on the seat heating. The seat heat-
ing should alson ot be used to dry the seats.
R clea nthe seat covers as recommended;
see "Interio rcare".
R do not transport heav yloads on the seats.
Do not place sharp objects on the seat
cushions, e.g. knives, nail sortools. The
seats should only be occupied by passen-
gers, if possible.
R when the seat heating is in operation, do
not cover the seats with insulating materi-
als,e .g. blankets, coats, bags, seat covers,
child seats or booster seats.
! Make sure that there are no objects in the
footwel lunder or behind the seats when mov-
ing the seats back. There is arisk that the
seats and/or the objects coul dbedamaged.
i The rear-compartment head restraints can
be removed (Y page106).
Vehicles without the through-loading feature:
the head restraints cannot be removed from
the rear-compartment seats.
For more information, contact aqualified spe-
cialist workshop.
i Related topic:
R Through-loading facility in the rear bench
seat (Y page102) Seats
103Seats, steering wheel and mirrors Z

Adjusting th
eheadr estraints electri-
cally X
To adjust th eheadr estrain theight: slide
th es witch for th ehead restrain tadjustment
(Y page 104) up or down in th edirection of the
arrow.
Vehicles wit hAMG Performance Seat: the
height of th ehead restraints canno tbeadjus-
ted.
Adjusting th erears eath eadr estraint
height X
If th ehead restrain tisfully lowered, it is nec-
essary to press release catch :.
X To raise: pull thehead restrain tuptothe
desired height.
X To lower: press release catch :and push
th eh ead restrain tdown until it is in the
desired position.
Fitting and removing rea rhead
restraints X
Releas ethe rear seat backrest and fol dit
slightly forward s(Ypage 310).
X To remove: pull thehead restrain tuptothe
stop.
X Press release catch :and pull th ehead
restrain tout of th eguides.
X To refit: insert thehead restrain tsothatthe
notches on th ebar are on th eleftw hen
viewed in th edirection of travel.
X Push th ehead restrain tdown until you hear it
engage in position.
X Fold bac kthe rear seat backrest until it
engages. Folding th
efront-seat backrests
forward/back
Important safety notes G
WARNING
If th ebackrest is no tengaged, it could fold
forward sduring abraking manoeuvre or in the
event of an accident, for example. The seat
backrest will then push th evehicl eoccupant
against th eseat belt .The seat belt cannot
protect as intended and could result in addi-
tional injury. This poses an increased ris kof
injury.
Befor eeachjou rney, mak esuret ha tthe back-
res tengage sfully as described. G
WARNING
You could lose control of th evehicl ewhile
drivin gifyou:
R adjust th edriver's seat ,steering whee lor
mirror
R faste nthe seat belt.
There is ariskofana ccident.
Adjus tthe driver's seat ,steering whee lor
mirror and faste nthe seat belt before starting
th ee ngine. G
WARNING
When adjusting aseat ,you or another vehicle
occupant could become trapped by th eguide
rail of th eseat ,for instance .There is ariskof
injury.
Mak esuret hatnoo nehas any part of their
body within th eswee poft heseat when
adjusting it.
Observ ethe safet ynotes on "Airbags"
(Y page 44) and "Children in th evehicle"
(Y page 55). 106
SeatsSeats
,steering wheel and mirrors

Adjusting th
esteering wheel electri-
cally :
To adjust th esteering whee lposition (fore-
and-af tadjustment)
; To adjust th esteering whee lheight
i Further relate dsubjects:
R EASY-ENTRY/EXIT feature (Y page 112)
R Storing setting s(Ypage 116)
R Operating th eon-bo ard computer
(Y page 233). Steering wheel heating
Switchin gon/off X
Turn th ekeyto position 2in th eignition lock
(Y page 145).
X To switch on/off: turnthe lever in th edirec-
tion of arrow :or;.
Indicato rlamp =lights up or goe sout.
Vehicles without KEYLESS-GO :when you
remove th ekeyfrom th eignition lock, th esteer-
ing whee lheating is switched off.
Vehicles wit hKEYLESS-GO :when you switch off
th ei gnition and open th edriver's door ,the
steering whee lheating is switched off. Steering wheel
111Seats,steering wheel and mirrors Z

Problems with the steering wheel heating
Problem
Possible causes/consequences and
M
MSolutions The steering wheel heat-
ing has switched itself
off prematurely or can-
not be switched on. The on-board voltage is too low because too many electrical consum-
ers are switched on.
X Switch off electrical consumers that you do not need, such as the
rear window heating or interior lighting. EASY-ENTRY/EXIT feature
Important safety notes G
WARNING
When the EASY-ENTRY/EXIT feature adjusts
the steering wheel, you and other vehicle
occupants –particularly children –could
become trapped. There is arisk of injury.
While the EASY-ENTRY/EXIT feature is mak-
ing adjustments, make sure that no one has
any body parts in the sweep of the steering
wheel.
Move the steering wheel adjustment lever if
there is arisk of entrapment by the steering
wheel. The adjustment process is stopped.
Press one of the memory function position but-
tons. The adjustment process is stopped. This
function is only available on vehicles with a
memory function. G
WARNING
If children activate the EASY-ENTRY/EXIT fea- ture, they can become trapped, particularly
when unattended. There is arisk of injury.
When leaving the vehicle, always take the key with you and lock the vehicle. Never leave
children unattended in the vehicle. G
WARNING
If you drive off while the EASY-ENTRY/EXIT
feature is making adjustments, you could lose
control of the vehicle. There is arisk of an
accident.
Always wait until the adjustment process is
complete before driving off. The EASY-ENTRY/EXIT feature makes gettingin
and out of your vehicle easier.
You can activate and deactivate the EASY-
ENTRY/EXIT feature using the multimedia sys-
tem (see the separate operating instructions).
Position of the steering wheel when the EASY-ENTRY/EXIT featureisa ctive The steering wheel tilts upwards if you:
R remove the key from the ignition lock
R with KEYLESS-GO: open the driver's door;
KEYLESS-GO must be in position 1
R with the key: open the driver's door; the key
must be in position 0or 1in the ignition lock
(Y page 145)
R open the driver's door when the ignition is
switched off
i The steering wheel only tilts upwards if the
driving position is stored after the steering
column adjustment has been adjusted
(Y page 116).
The most recent driving position of the steering
wheel is stored if:
R the ignition is switched off
R the settingiss tored using the memory func-
tion (Y page 116)
i The steering wheel only moves upwards if it
has not already reached the upper steering
limiter. 112
Steering wheelSeats, steering wheela
nd mirrors