2015 MERCEDES-BENZ C-CLASS COUPE ignition

Interior lighting
Overview of interior lighting
Fron toverhea dcontrol panel :
p Switches th eleft-han dfront reading
lamp on/off
; | Switches th eautomatic interio rlight-
ing control on/off
= c Switches th efront interio rlighting on/
off
? u Switches th erear interio rlighting on/
off
A p Switches th eright-hand fron treading
lamp on/off Interior lighting control
General notes In order to preven
tthe vehicle's battery from
discharging ,the interio rlighting function sare
automatically deactivated after som etime
except for when th ekeyis in position 2in the
ignition lock.
The colour ,brightness and display lighting for
th ea mbien tlighting are set usin gthe multime-
dia system (see th eseparat eoperating instruc-
tions).
Automati cinterior lighting control X
To switch on/off: press the|button.
When th eautomatic interio rlighting control is
switched on ,the butto nisflushw itht he over-
head control panel. The interior lighting automatically switches on if
you:
R unlock th evehicle
R open adoor
R remove th ekeyfrom th eignition lock
The interior lighting is activated for ashort time
when th ekeyis remove dfromt heignition lock.
This delaye dswitch-off can be adjusted via the
multimedia system (see th eseparat eoperating
instructions). Replacin
gbulbs Important safety notes
G
WARNING
Bulbs, lamp sand plug connectors can
become ver yhot during use. When replacing a
bulb, you could burn yourself on these com-
ponents .Ther eisar iskofi njury.
Allow these component stocooldown before
replacing th ebulb.
Do no tuse ab ulb that has been dropped or if its
glass tub ehas been scratched.
The bulb may explod eif:
R you touch it
R it is hot
R you dro pit
R you scratch it
Only operate bulbs in enclosed lamp sdesigned
for that purpose .Onlyf it spar ebulbs of th esame
typ eand th especifie dvoltage.
Mark sont heglass tub ereduce th eservic elife
of th ebulbs .Don ottouch th eglass tub ewith
your bare hands. If necessary, clean th eglass
tub ew hen cold wit halcohol or spirit and rub it
off wit halint-free cloth.
Protect bulbs from moisture during operation.
Do no tallow bulbs to come int ocontac twith
liquids.
Only replace th ebulbs listed (Y page 124).
Hav ethe bulbs that you canno treplace yourself
replace dataq ualified specialist workshop.
If you require assistanc ereplacing bulbs ,con-
sult aqualified specialist workshop.
If th enew bulb still does no tligh tup, consult a
qualified specialist workshop. Replacin
gbulbs
123Lightsand windscreen wipers Z

X
Switch off the lights.
X Ope nthe bonnet.
X Turn housing cover :anti-clockwise and
remove it.
X Turn bulb holder ;anti-clockwise and pull
out.
X Pull the bulb ou tofbulbh older ;.
X Insert the new bulb into bulb holder ;.
X Insert bulb holder ;and turn it clockwise.
X Press on housing cover :and turn it to the
right.
Turn signals X
Remove the cove rinthe front wheel arch
(Y page 124).
X Turn housing cover :anti-clockwise and
remove it.
X Turn bulb holder ;anti-clockwise, unlock it
and pull out.
X Pull the bulb ou tofbulbh older ;.
X Insert the new bulb into bulb holder ;.
X Insert bulb holder ;and turn it clockwise.
X Press on housing cover :turn clockwise and
lock.
X Replace the cove rinthe front wheel arch
(Y page 124). Windscree
nwipers Switchin
gthe windscree nwipers on/
off
! Do not operate the windscreen wiper
swhen
the windscreen is dry ,asthis could damage
the wiper blades. Moreover, dust that ha scol-
lected on the windscreen can scratch the glas
sifw ipingtakes place when the wind-
screen is dry.
If it is necessary to switch on the windscreen wiper sindry weathe rconditions ,always
operate them using washe rfluid.
! If the windscreen wiper
slea ve smears on
the windscreen afte rthe vehicl ehasbeen
washe dinana utomatic car wash, this may be
du etow axor othe rresidue .Clean the wind-
screen with washe rfluid afte ranautomatic
car wash.
! Intermittent wiping with rai
nsensor: du eto
optical influences and the windscreen becom-
ing dirty in dry weathe rconditions ,the wind-
screen wiper smay be activate dinadvertently.
Thi scould damag ethe windscreen wiper
blades or scratch the windscreen.
For this reason, yo ushoul dalway sswitch off
the windscreen wiper sindry weather. 1
$ Windscreen wiper soff
2 Ä Intermittent wipe, lo w(rain sensor set
to lo wsensitivity)
3 Å Intermittent wipe, hig h(rain sensor
set to hig hsensitivity)
4 ° Continuou swipe, slow
5 ¯ Continuou swipe, fast
B í Singlewipe
î To wipe with washe rfluid
X Turn the key to position 1or 2in the ignition
lock (Y page 145).
X Turn the combination switch to the corre-
sponding position.
Vehicles with arain sensor: in theÄor
Å position, the appropriate wiping frequency
is automaticall yset according to the intensity of
the rain. In the Åposition, the rai nsensor is
more sensitive than in the Äposition, caus-
ing the windscreen wiper to wipe more fre-
quently. Windscree
nwipers
125Lights and windscree nwipers Z

If the wiper blades are worn, the windscreen will
no longer be wiped properly. This could mean
you are unabletoo bserve the traffic conditions. Replacin
gthe wiperb lades
Important safety notes G
WARNING
If the windscree nwipers begin to move while
you are changing the wiper blades, you can be trapped by the wiper arm. There is arisk of
injury.
Alwayss witch off the windscreen wipers and
ignition before changing the wiper blades.
! Never open the bonnet/tailgate if
awiper
arm is folded awayf rom the windscreen/rear
window.
Never fold awindscreen wiper arm withou ta
wiper blade back onto the windscreen/rear
window.
Hold the windscree nwiper arm firmly when
you change the wiper blade. If you release the
wiper arm withou tawiper blade and it falls
onto the windscreen/rear window ,the wind-
screen/rear window may be damaged by the
force of the impact.
Mercedes-Benz recommends that you have
the wiper blades changed at aqualifieds pe-
cialist workshop.
! To avoid damaging the windscreen wiper
blades, make sure that you touch only the
wiper arm of the windscreen wiper.
Replacing the windscreen wiperb ladesMovingt
he wiperb lades to the vertical
position
On vehicles without KEYLESS-GO:
X Turn the key to position 1or 2in the ignition
lock (Y page 145).
X Set the windscree nwipers to the °posi-
tion.
X When the wiper arms have reached the verti-
cal position, turn the key to position 0and
remove it from the ignition lock.
X Fold the wiper arm awayf rom the windscreen.On vehicles with KEYLESS-GO:
X Switch off the engine.
X Remove yourf oot from the brake pedal.
X Set the windscree nwipers to the °posi-
tion.
X Press the Start/Stop button repeatedly until
the windscree nwipers start.
X When the wiper arms have reached the verti-
cal position, press the Start/Stop button.
X Fold the wiper arm awayf rom the windscreen.
Removing the wiperb lades X
Hold onto the wiper arm with one hand. With
the other hand, turn the wiper blade in the
direction of arrow :awayf rom the wiper arm
as far as it willg o.
X Slide catch ;in the direction of arrow =
until it engages in the removal positio nwith a
noticeable click. X
Remove the wiper blade in the direction of
arrow ?awayf rom the wiper arm. 126
Windscreen wipersLights and windscreenw
ipers

Problems with the windscreen wipers
Problem
Possible causes/consequences and
M
MSolutions The windscreen wipers
are jammed. Leaves or snow, for example, may be obstructing the windscreen
wiper movement
.The wiper motor has been deactivated.
X For safety reasons, you should remove the key from the ignition
lock.
or X Switch off the engine using the Start/Stop button and open the
driver's door.
X Remove the cause of the obstruction.
X Switch the windscreen wipers back on. The windscreen wipers
fail completely. The windscreen wiper drive is malfunctioning.
X Select another wiper speed on the combination switch.
X Have the windscreen wipers checked at aqualified specialist work-
shop. The windscreen washer
fluid from the spray noz-
zles no longer hits the
centre of the wind-
screen. The spray nozzles are misaligned.
X Have the spray nozzles adjusted at aqualified specialist workshop. 128
Windscreen wipersLights and windscreen wipers

Overview of climat
econtrol systems General notes
Observe the settings recommended on the fol-
lowing pages. The windows could otherwise
mist up.
To preven tthe windows from mistin gup:
R switch off climate control only briefly
R activat eair-recirculation mode only briefly
R switch on "Cooling with air dehumidification"
R activat ethe windscreen demistin gfunction
briefly, if required
Climate control regulates the temperature and
air humidity in the vehicle interior. The interior
filter cleans the air, thus improvin gthe interior
climate.
The "Cooling with air dehumidification "function
is only available when the engine is running.
Optimum climate control is only achieved with
the side windows and roof closed.
The residual heat function can only be activated or deactivated with the ignition switched off
(Y page 136).
i Ventilate the vehicle for
abrief period during
warm weather, e.g. using the "Convenience
opening "feature (Y page 94). This will speed
up the cooling process and the desired inte-
rior temperature will be reached more
quickly.
i The integrated filter filters out most parti-
cles of dust and soot and completely filters
out pollen. It also reduces gaseous pollutants and odours. Aclogged filter reduces the
amount of air supplied to the vehicle interior.
For this reason, you should alway sobserve
the interval for replacing the filter, which is
specified in the Service Booklet. As this
depends on environmental conditions ,e.g.
heavy air pollution, the interval may be
shorter than stated in the Service Booklet.
i It is possible that the blower may be activa-
ted automatically 60 minutes after the key
has been removed depending on various fac-
tors ,e.g. the outside temperature. The vehi-
cle is then ventilated for 30 minutes to dry the automatic climate control. Overview of climat
econtrol systems
129Climatecontrol

Control panel for THERMATIC automatic climat
econtrol Example
:
To set th etem perature, left (Y page 133)
; To set th eair distribution (Y page 133)
= To set th eairflow (Y page 133)
To switch climate control off (Y page 131)
? To set climate control to automatic mod e(Ypage 132)
A To demist th ewindscree n(Ypage 133)
B To call up th eclimate control men uofthemultimedia system (Y page 300)
Vehicle switha uxiliary heating :toswitch the !residual heat on/of f(Ypage 136)
C To switch th erear window heating on/of f(Ypage 134)
D Vehicle switha uxiliary heating :toswitch the &auxiliary heating on/of f(Y page 138)
Vehicle swithout auxiliary heating :toswitch 0synchronisation on/of f(Ypage 133)
E To activate/deactivat eair-recirculation mod emanually (Y page 135)
F To activate/deactivat ecoolin gwitha ir dehumidification (Y page 132)
G To set th etem perature, righ t(Ypage 133) Notes on usin
gthe automatic climate
control
Optimu muse of th eautomatic climate
control The followin
gcontain snotes and recommenda-
tions on optimum use of THERMATIC automatic climate control.
R Activate climate control usin gthe Ã
rocke rswitch .The indicator lamp abov ethe
à rockerswitch light sup. The "Cooling
wit hair dehumidification "function is no tacti-
vated automaticall yinautomatic mode. If necessary, activat
ethisf unction
(Y page 132).
R Set th etem peratur eto22†.
R Only use th e"Windscree ndemisting "function
briefly until th ewindscree nisclear again.
R Only use air-recirculation mod ebriefly, e.g .if
there are unpleasan toutside odour sorwhen
in at unnel. The windows coul dotherwise mist
up as no fresh air is drawn int othe vehicle in
air-recirculation mode.
R Vehicle swithT HERMATIC wit hauxiliary heat-
ing :use th e"residual heat "function if you
want to heat or ventilate th evehicle interior
when th eignition is switched off .The residual
heat function can only be activated or deac- 130
Overview of climat
econtrol systemsClimate control

tivated with the ignition switched off
.The
residua lhea tfun ctio nisd eactivated when the
ignition is switched on.
DYNAMIC SELECT switc h(exce pt
Mercedes-AMG vehicles) Yo
uc an choose between various drive programs
with the DYNAMIC SELEC Tswitch:
R manua ltransmission (Y page 154)
R automatic transmission (Y page 154)
If yo uhaves elect ed drive program E:
R the cooling outpu tisr educe dwhenc ooling
R when heating, the electrical heate rbooste ris
deactivated and heat outpu tisr educe dasa
result
R the rea rwindo wh eating running tim eis
reduced
If yo uhaves elect ed drive program C,Sor S+ ,
the current climate setting saremaintained.
EC Os tart/sto pfunction During automatic engine switch-off
,the climate
contro lonlyo perates at areduce dcapacity. If
yo ur equire the full climate contro loutput, you
can switch off the ECO start/sto pfunctio nby
pressing the ECO button (Y page 151).Operatin
gthe climate contro lsystem Switchin
gthe climate contro lon/off
General notes When climate contro
lisswitched off ,the air
supply and ai rcirculation ar ealsos witched off.
The windows could mist up .Therefore ,only
switch off climate contro lbriefly.
Switch on climate contro lprimaril yusing the
à rockerswitch (Y page 132).
Activating/deactivating X
Turn the key to position 2in the ignition lock
(Y page 145).
X To switc hon:setthe airflow to level 1or
highe rusing the Hrockerswitch.
X To switc hoff:setthe airflow to level 0using
the H rockerswitch. Operatin
gthe climate contro lsystem
131Climate control

Activating/deactivating cooling with air dehumidification
Genera lnotes If you deactivat
ethe "Cooling wit hair dehumidification "function ,the air inside th evehicl ewill not
be cooled .The air inside th evehicl ewill also no tbedehumidified. The windows can mis tupmore
quickly. Therefore ,deactivat ethe "Cooling wit hair dehumidification "function only briefly.
The "Cooling wit hair dehumidification "function is only available when th eengineisr unning. The air
inside th evehicl eisc ooled and dehumidifie daccording to th etem perature selected.
Condensation may dri pfromt heunderside of th evehicl ewhen coolin gmodeisa ctive.This is normal
and no tasign that there is amalfunction.
Activating/deactivating X
Press the ¿rockerswitch up or down
The indicator lamp abov ethe rocke rswitch lights up or goe sout.
Problem swith th e"Cooling with air dehumidification" function Problem
Possible causes/consequences and
M
MSolutions The indicator lamp above
the ¿ rockerswitch
flashes three times or
remain soff.T he cooling
wit hair dehumidification
function canno tbeacti-
vated via th emultimedia
system any longer
(Y page 301). The coolin
gwitha ir dehumidification function has been deactivated
due to amalfunction.
X Consult aqualified specialist workshop. Setting climat
econtrol to automatic
mode
Genera lnotes In automatic mode, th
eset temperature is main-
taine dautomatically at aconstant level. The
system automatically regulates th etem perature
of th edispensed air, th eairflow and th eair dis-
tribution.
The "Cooling wit hair dehumidification "function
is activated automatically in automatic mode. Automati
ccontrol X
Turn th ekeyto position 2in th eignition lock
(Y page 145).
X Se tthe desired temperature usin gthe w
rocke rswitch on th efront control unit.
X To activate: press theÃrockerswitch up
or down.
The indicator lamp abov ethe à rocker
switch lights up.
X To switch to manua loperation: press the
H rockerswitch up or down.
or X Press th eupper or lower section of the _
rocke rswitch.
The indicator lamp abov ethe à rocker
switch goes out.
In automatic mode, if you adjust th eairflow or
air distribution manually, th eindicator lamp
abov ethe à rockerswitch goe sout.T he
function whic hhas no tbeen changed manually, 132
Operating th
eclimat econtro lsystemClimat econt rol