2015 MAZDA MODEL MX-5 light

When Driving
14 For details, refer to Section 4, “i-ACTIVSENSE”.
i-ACTIVSENSE
i-ACTIVSENSE is a collective term covering a series of advanced safety and driver
support systems which make use of a Forward Sensing Camera (FSC) and radar
sensors.
Driver awareness support systems
• Adaptive Front Lighting System (AFS)
• High-Beam Control system (HBC)
• Lane Departure Warning System (LDWS)
• Blind Spot Monitoring (BSM)
Because each system has its limitations, always drive carefully and do not rely
solely on the systems.
Nighttime visibility
Left/right side and rear side detection
• Rear Cross Traffic Alert (RCTA)
Rear obstruction detection when leaving a parking space
• Adjustable Speed Limiter
Speed control Driver support system
/:A'8'''A'FKVKQPA3WKEM)WKFGKPFD

17
When Driving
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four tyres. If the air pressure of one or more tyres is too low, the system warns the
driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The tyre pressure monitoring system warning
light is illuminated.
Tyre Pressure Monitoring System
For details, refer to Section 4, “Tyre Pressure Monitoring System”.
Vehicle with Conventional Tyres
The Tyre Pressure Monitoring System (TPMS) monitors the pressure for each tyre. Vehicle with Run-flat Tyres
If tyre pressure is too low in one or more tyres, the system will inform the driver
via the warning light in the instrument cluster and by the warning beep sound.
/:A'8'''A'FKVKQPA3WKEM)WKFGKPFD

Interior Features
18
Air intake selector switch A/C switchMode selector dial
Temperature control dialFan control dial
Rear window defogger switch
Air-Conditioning System (Fully Automatic Type)
Operation of Automatic Air Conditioning
1. Set the mode selector dial to the AUTO position.
2. Set the air intake selector to the outside air position (indicator light turned off).
3. Set the fan control dial to the AUTO position.
4. Press the A/C switch to operate the air conditioning (turn indicator light on).
5. Set the temperature control dial to the desired position.
6. To turn off the system, set the fan control dial to the 0 position.
For details, refer to Section 5, “Air-Conditioning System”.
/:A'8'''A'FKVKQPA3WKEM)WKFGKPFD

If Trouble Arises
20
If Trouble Arises
• Flat Tyre
Either run-flat tyres or conventional tyres are equipped on your Mazda depending
on the specification, therefore the procedure for repairing a flat tyre differs
depending on the type of tyre. Before driving, make sure which type of tyre is
equipped on your Mazda. If you cannot identify your tyre type, consult an expert
repairer, we recommend an Authorised Mazda Repairer.
• Overheating
1. Drive safely to the side of the road and park off the right-of-way.
2. Check whether coolant or steam is escaping from the engine compartment.
If steam is coming from the engine compartment:
Do not go near the front of the vehicle. Stop the engine.
Wait until the steam dissipates, then open the bonnet and start the engine.
If neither coolant nor steam is escaping:
Open the bonnet and idle the engine until it cools.
• Towing Description
We recommend that towing be done only by an expert repairer, we recommend
an Authorised Mazda Repairer or a commercial tow-truck service.
• Warning Lights and Warning Sounds
If a warning light illuminates or flashes or a warning sound is heard, check for
details concerning the warning light or sound in this guide. If the problem
cannot be resolved, contact an Authorised Mazda Repairer.
For details, refer to Section 7, “Flat Tyre”, “Overheating”, “Emergency Towing” or
“Warning/Indicator Lights and Warning Sounds”.
/:A'8'''A'FKVKQPA3WKEM)WKFGKPFD