2015 MAZDA MODEL CX-5 instrument cluster

When Driving
5
Starting the Engine
For details, refer to Section 4, “Start/Stop Engine”.
(SKYACTIV-D 2.2)
• The starter does not rotate until the glow indicator light turns off.
• When starting the engine, do not release the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) until the glow indicator light in the
instrument cluster turns off and the engine starts, after pressing the push button
start.
1. Make sure the parking brake is on.
2. Continue to press the brake pedal firmly until
the engine has completely started.
3. (Manual transaxle)
Continue to press the clutch pedal firmly until
the engine has completely started.
(Automatic transaxle)
Put the vehicle in park (P). If you must restart the
engine while the vehicle is moving, shift into
neutral (N).
4. Press the push button start after both the KEY indicator
light (green) (if equipped) in the instrument cluster and
the push button start indicator light (green) illuminate.
• If the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) is
released before the engine starts, depress the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) again and press the push button start to
start the engine.
• If the ignition is left switched ON for a long period of time without the engine
running after the glow plugs are warmed up, the glow plugs may warm up again
which will illuminate the glow indicator light.
Push button start
Indicator light
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

7
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
By pressing the switch until a beep sounds,
the i-stop function is turned off and the i-stop
warning light (amber) in the instrument
cluster turns on. By pressing the switch again
until the beep sounds, the i-stop function
becomes operational and the i-stop warning
light (amber) turns off.
i-stop Warning Beep
If the driver's door is opened while engine idling is stopped, the warning sound
operates to notify the driver that engine idling is stopped. It stops when the driver's
door is closed.
i-stop indicator light (green)/i-stop warning light (amber)
i-stop indicator light (green)
• When the engine idling is stopped.
Engine idling stop conditions are met while the vehicle
is being driven.
• The light turns on when the ignition is switched ON and
turns off when the engine is started. i-stop warning light (amber)
• The light turns on when the i-stop OFF switch is
pressed and the system is turned off. • (Except European model)
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

8
When Driving
For details, refer to Section 4, “Instrument Cluster and Display”.
Warning/Indicator Lights
Signal Warning/Indicator Lights
1
2
3
4
7
8
9
10
11
12Brake System Warning Light Master Warning Light
ABS Warning Light
Charging System Warning
Indication/Warning Light
Engine Oil Warning Light
Check Engine Light
High Engine Coolant Temperature
Warning Light (Red)
i-stop Warning Light
(Amber)/Indicator Light (Green)
14
17
18
19Automatic Transaxle Warning
Indication
Power Steering Malfunction
Indication
20Air Bag/Front Seat Belt Pretensioner
System Warning Light
Low Fuel Warning Light
21Seat Belt Warning Light
22
2327
28
29
35
36
38
40Tyre Pressure Monitoring System
Warning Light
KEY Indication
High Beam Control System (HBC)
Warning Light (Amber)/Indicator
Light (Green)
TCS/DSC Indicator Light
TCS OFF Indicator Light
Low Engine Coolant Temperature
Indicator Light (Blue)
41
42
43
44
45Shift Position Indication
Headlight High-Beam Indicator Light
Direction indicator/Hazard Warning
Indicator Lights
Security Indicator Light
49
Cruise Main Indicator Light (Amber)/
Cruise Set Indicator Light (Green)
Lights-On Indicator Light
51Front Fog Light Indicator Light
Rear Fog Light Indicator Light
52Signal Warning/Indicator Lights
Warning (Display Indication)
Some of the warning/indicator lights are displayed in the instrument cluster.
If a warning/indicator light is displayed in the instrument cluster, verify the
meaning of the warning in the Warning (Display Indication) item.
Glow Indicator Light
Diesel Particulate Filter Indication
Wrench Indication31
32
33
Vehicle Speed Warning Indication
34Low Ambient Temperature Warning
Indication
Low Washer Fluid Level Warning
Indication 25
Mazda Radar Cruise Control
(MRCC) Warning Light
(Amber)/Indicator Light (Green) 46
24
Electric Parking Brake Indicator Light
Electric Parking Brake Warning Light
Lane-Keep Assist System Indication
Lane-Keep Assist System OFF Indication
Lane Departure Warning System
(LDWS) Indication
Lane Departure Warning System
(LDWS) OFF Indication
4WD Warning Indication
Door-Ajar Warning Indication
Liftgate-Ajar Warning Indication
Adaptive LED Headlights Warning
Light (Amber)/Indicator Light (Green)
Smart Brake Support/Smart City Brake
Support (SBS/SCBS) OFF Indicator Light
Smart City Brake Support (SCBS)
Warning Indication
i-ELOOP Indication
Select Mode Indication
Blind Spot Monitoring (BSM) OFF Indication
LED Headlight Warning Light 5
6
13
15
1630
37
39
47
48
50120 km/h Warning Light
26
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
9
Automatic Transaxle Controls
Various Lockouts:
Indicates that you must depress
the brake pedal and hold in the
lock-release button to shift (The
ignition must be switched ON).
Indicates the selector lever can be
shifted freely into any position.
Indicates that you must hold in
the lock-release button to shift.
Drive Selection Switch
Drive Selection
Drive selection is a system to switch the vehicle's drive mode. When the sport mode
is selected, vehicle's response against accelerator operation is enhanced. Use the
sport mode when higher vehicle response is required such as merging onto
expressway or accelerating to overtake.
2. Pull the drive selection switch to the side
(backward) to cancel the sport mode.
1. Press the drive selection switch to the
side (forward) to select the sport mode.
Select Mode Indicator Light
When the sport mode is selected, the select mode
indication turns on in the instrument cluster.
For details, refer to Section 4, “Transaxle”, “Drive Selection”.
Lock-release button
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

13
When Driving
For details, refer to Section 4, “Adaptive LED Headlights”.
Adaptive LED Headlights
Other details are described in the related text.
NOTE
In the following situations, the adaptive LED headlights may not operate as
expected.
• When there are sources of light in the area such as street lamps, illuminated
signboards, and traffic signals.
• When there are reflective objects in the surrounding area such as reflective
plates and signs.
• When visibility is reduced under rain, snow and foggy conditions.
• When driving on roads with sharp curves or undulations.
The system switches the headlights to the high beams after the ignition is switched
ON and the headlight switch is in the AUTO position.
To turn on the system
CAUTION
Do not rely completely on the adaptive LED headlight system and drive the
vehicle while paying sufficient attention to safety. Switch the headlights between
the high and low beams manually if necessary.
Other details are described in the related text.
The adaptive LED headlight indicator light (green) in the instrument cluster turns
on while the adaptive LED headlights are operating.
Adaptive LED headlight indicator light (green)
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

15
When Driving
For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Mazda Radar Cruise Control (MRCC) Display IndicationSetting the Mazda Radar Cruise Control (MRCC)
The Mazda Radar Cruise Control (MRCC) system may be cancelled during rain,
fog, snow or other inclement weather conditions, or when the front surface of the
radiator grille is dirty.
NOTE
Under the following conditions, operation of the Mazda Radar Cruise Control
(MRCC) system is temporarily cancelled, a cancel indication is indicated in the
display in the instrument cluster, and the MRCC indicator light (green) turns off
simultaneously.
• The CANCEL switch is pressed or the brake pedal is depressed.
The setting status of the Mazda Radar Cruise Control (MRCC) system is indicated
in the display in the instrument cluster.
A system malfunction or operation conditions are indicated by a warning.
• The parking brake is applied.
• The shift lever is in the P, N, or R position (for manual transaxle vehicles,
R position only).
• The vehicle speed decreases to less than 25 km (16mph).
• The DSC, Smart Brake Support (SBS) system, or the Smart City Brake
Support (SCBS) system is operating.
• A system malfunction is detected.
Other details are described in the related text.
Vehicle ahead display
MRCC Set vehicle speedMRCC Distance between
vehicle display
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
16
Switch
Switch
OFF switch
RES switch
Cruise control
SET+/SET- switch CANCEL switch
ON switch
For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Setting the Mazda Radar Cruise Control (MRCC)
How to Set the Speed When the ON switch is pressed, the vehicle speed and the distance between
vehicles while in headway control can be set. The Mazda Radar Cruise Control
(MRCC) indication is displayed in the display of the instrument cluster.
1. Adjust the vehicle speed to the desired setting using the accelerator pedal.
2. Headway control begins when the SET + or SET - switch is pressed. The set
speed and the inter-vehicle distance display filled with white lines are displayed.
Travel statusDuring travel at constant
speedDuring travel under headway
control
Display
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

22
When Driving
Smart Brake Support (SBS)
Smart Brake Support (SBS) is a system which alerts the driver of a possible
collision using an indicator and warning sound in the instrument cluster while the
vehicle is being driven at about 15 km/h or faster (10 mph or faster) and the
system's radar sensor determines that your vehicle may hit a vehicle ahead.
Furthermore, if the radar sensor determines that a collision is unavoidable, the
automatic brake control is performed to reduce damage in the event of a collision.
For details, refer to Section 4, “Smart Brake Support (SBS)”.
Do not rely completely on the Smart Brake Support (SBS) system and always
drive carefully:
The Smart Brake Support (SBS) system is only designed to reduce damage in the
event of a collision. The ability to detect obstructions is limited depending on the
obstruction, weather conditions, or traffic conditions.
Check the safety of the surroundings and pay sufficient attention to the
distance between your vehicle and the vehicles travelling in front and behind.
WARNING
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD