2015 MAZDA MODEL CX-3 brakes

13
When Driving
For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Mazda Radar Cruise Control (MRCC) system
The Mazda Radar Cruise Control (MRCC) system is designed to maintain
headway control according to the vehicle speed using a radar sensor to detect the
distance to a vehicle ahead, which frees the driver from having to use the
accelerator or brake pedals.
Additionally, if your vehicle starts closing in on the vehicle ahead because, for
example, the vehicle ahead brakes suddenly, a warning sound and a warning
indication in the display are activated simultaneously to alert you to maintain a
sufficient distance between the vehicles.
Use the Mazda Radar Cruise Control (MRCC) system on expressways and other
highways which do not require a lot of repeated acceleration and deceleration. The possible vehicle speed setting ranges are as follows:
Do not rely completely on the Mazda Radar Cruise Control (MRCC) system
and always drive carefully:
The Mazda Radar Cruise Control (MRCC) system has limitations in its ability to
detect vehicles ahead depending on the weather and road conditions.
Additionally, the system may be unable to decelerate sufficiently to avoid
hitting the vehicle ahead if the vehicle ahead applies the brakes suddenly or
another vehicle cuts into the driving lane, which could result in an accident.
Check the safety of the surroundings and pay sufficient attention to the
distance between your vehicle and the vehicles travelling in front and behind.
WARNING
Do not use the Mazda Radar Cruise Control (MRCC) system in the
following locations. Otherwise, it could lead to an accident:
• Roads with sharp curves, heavy traffic, or roads requiring repeated and
frequent acceleration.
• When entering expressway interchanges and service areas.
• Slippery roads such as ice or snow-bound roads.
• Long descending slopes.
• (European models)
About 30 km/h (19 mph) to 200 km/h (124 mph)
• (Except European models)
About 30 km/h (19 mph) to 145 km/h (90 mph)
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC







When Driving
1616For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Setting the Mazda Radar Cruise Control (MRCC)
How to Set the Distance Between Vehicles During Headway Control
The distance between vehicles is set to a shorter distance each time the switch is
pressed. The distance between vehicles is set to a longer distance by pressing the
switch. The distance-between-vehicles can be set to 4 levels; Long, medium, short,
and extremely short distance.
Distance-between-
vehicles guideline
(at 80 km/h (50 mph)
vehicle speed)
Indication on
displayLong
(about 50 m
(164 ft))Medium
(about 40 m
(131 ft))Short
(about 30 m
(98 ft))Extremely
short
(about 25 m
(82 ft))
Change the Set Vehicle Speed
Changing the set vehicle speed using the SET + / SET - switch
Press and hold the SET + or SET - switch to adjust the set vehicle speed in 10 km/h
(5 mph) increments.
The set vehicle speed can also be adjusted in 1 km/h (1 mph) (European models)
or 5 km/h (5 mph) (Except European models) increments by pressing and
releasing the SET + or SET - switch immediately.
To accelerate using the accelerator pedal
Depress the accelerator pedal and press and release the SET + or SET - switch at
the desired speed. If a switch cannot be operated, the system returns to the set
speed when you release your foot from the accelerator pedal.
Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead
because the vehicle applies the brakes suddenly while you
are travelling in headway control, the warning sound
activates and the brake warning is indicated in the display.
Always verify the safety of the surrounding area and
depress the brake pedal while keeping a safer distance from
the vehicle ahead. Additionally, always keep a safer
distance from the vehicles behind you.
$9@&;&&%@&EJUJPO@2VJDL(VJEFJOEC