9–20
Specifi cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings change method
Fuel
Economy
Monitor
Refer
to Fuel
Economy
Monitor on
page 4-88 . Ending
display Setting can be changed
so that the ending
display of the Fuel
Economy Monitor is
displayed. Off On/Off
Refer
to Fuel
Economy
Monitor
on page
4-88 . —
Fuel
economy
resetting
procedure Setting can be changed
so that the fuel
economy reset is linked
with the trip meter
reset. Off On/Off Refer
to Fuel
Economy
Monitor
on page
4-88 . —
Active
driving
display
Refer to
Active
Driving
Display on
page 4-34 . Turn-by-
Turn (TBT) Setting can be changed
so that the Turn-by-
Turn (TBT) of the
Active driving display
is not displayed. On On/Off
Refer to
Active
Driving
Display
on page
4-34 . —
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traffi c Alert (RCTA) operation cannot be changed.
*4 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*5 Available only in display from the centre display.
$ 9 @ & ; & & % @ & E J U J P O J O E C
