2015 MAZDA MODEL CX-3 change time

5–130
Interior Features
Bluetooth®
NOTE
Some Bluetooth ® audio devices need a
certain amount of time before the “
”
symbol is displayed.
3. Press the media button (
) to
switch to the Bluetooth ® audio mode
and start playback.
If the current device version is lower
than AVRCP Ver. 1.3: “ BT Audio ” is
displayed.
If the current device is AVRCP Ver. 1.3:
The playback time is displayed.
NOTE
  If the Bluetooth ® audio device does
not begin playback, press the Play/
Pause button (4).
  If a call is received on a hands-free
mobile phone during playback from
the Bluetooth
® audio device, the
playback is stopped. Playback from
the Bluetooth
® audio device resumes
after the call ends.
Playback
1. To listen to a Bluetooth
® audio device
over the vehicle's speaker system,
switch the mode to Bluetooth
®
audio mode. (Refer to “Switching to
Bluetooth® audio mode”)
2. To stop playback, press the Play/Pause
button (4).
3. Press the button again to resume
playback.
Selecting a fi le (track)
Selects the next fi le (track)
Short-press the track up button (
).
Selects the beginning of the current fi le
(track)
Short-press the track down button (
).
Fast-forward/Reverse (AVRCP Ver. 1.3)
Fast-forward
Press and hold the fast-forward button
(
).
Reverse
Press and hold the reverse down button
(
).
Switching the display (only AVRCP Ver.
1.3)
The information displayed on the audio
display changes as follows each time the
text button ( 3 ) is pressed during playback.
Button Information displayed
on audio display
Elapsed time
Album name
Song name
Artist name
NOTE
  If title information is not available,
“ NO TITLE ” is displayed.
  This unit cannot display some
characters. Characters which cannot
be displayed are indicated by an
asterisk (
).
$9@&;&&%@&EJUJPOJOEC







6–15
Maintenance and Care
Scheduled Maintenance
Maintenance Monitor
Maintenance Monitor (Type A/Type B audio)
“Oil Change” with fl exible setting *1 is available. Consult an Authorised Mazda Repairer for
details*2 . When the engine oil fl exible maintenance setting is selected, the wrench indicator
light in the instrument cluster will be illuminated when remaining oil life becomes less than
500 km (300 mile), or remaining days are less than 15 (Whichever comes fi rst).
Reset method
Press and hold the TRIP button with the ignition switched off, then switch it on. Keep
pressing the TRIP button for more than 5 seconds. The master warning light will fl ash for a
few seconds when the reset is completed.
*1 The engine oil fl exible maintenance setting is available (only some models). Based on
the engine operating conditions, the onboard computer in your vehicle calculates the
remaining oil life.
*2 When the engine oil fl exible maintenance setting is selected, the system must be reset
whenever replacing the engine oil regardless of the wrench indicator light display.
Maintenance Monitor (Type C/Type D audio)
1. Select the icon on the home screen to display the “Applications” screen.
2. Select the “Maintenance” to display the maintenance list screen.
3. Switch the tab and select the setting item you want to change.
You can customize settings in the setup display as follows:
Tab Item Explanation
Maintenance Setting Notifi cation can be switched on/off.
Time (months) Displays the time or distance until maintenance is due.
Select this item to set the maintenance period.
“Scheduled Due!” is displayed in red and the wrench indicator
light in the instrument cluster will be illuminated when the
remaining distance is less than 500 km or 250 mile, or the
remaining number of days is less than 15 (whichever comes
fi rst). Distance (mile or km)
Reset Resets the time and distance to the initial values.
Once the system turns on, it needs to be reset whenever
carrying out maintenance.
$9@&;&&%@&EJUJPOJOEC







6–32
Maintenance and Care
Owner Maintenance
Window and Headlight
Washer Fluid
Inspecting Washer Fluid Level
WARNING
Use only windscreen washer fl uid or
plain water in the reservoir:
Using radiator antifreeze as washer
fl uid is dangerous. If sprayed on the
windscreen, it will dirty the windscreen,
affect your visibility, and could result in
an accident.
Inspect fl uid level in the washer fl uid
reservoir; add fl uid if necessary.
E

Use plain water if washer fl uid is
unavailable.
But use only washer fl uid in cold weather
to prevent it from freezing.
NOTE
Front and rear washer fl uid is supplied
from the same reservoir.
Body Lubrication
All moving points of the body, such as
door and bonnet hinges and locks, should
be lubricated each time the engine oil is
changed. Use a nonfreezing lubricant on
locks during cold weather.
Make sure the bonnet's secondary latch
keeps the bonnet from opening when the
primary latch is released.
$9@&;&&%@&EJUJPOJOEC







*Some models.7–53
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Tyre Infl ation Pressure Warning
Beep*
The warning beep sound will be heard
for about 3 seconds when there is any
abnormality in tyre infl ation pressures
(page 4-163 ).
Mazda Radar Cruise Control
(MRCC) System Warnings *
The Mazda Radar Cruise Control (MRCC)
system warnings notify the driver of
system malfunctions and cautions on use
when required.
Check based on the beep sound.
Cautions What to check
The beep sounds 1 time
while the Mazda Radar
Cruise Control (MRCC)
is operating The vehicle speed is
slower than 25 km/h (16
mph) and the Mazda
Radar Cruise Control
(MRCC) system has
been cancelled.
(European models)
The beep sounds 5 times
while driving
(Except European
models)
The beep continues to
sound while the vehicle
is being driven. The distance between
your vehicle and the
vehicle ahead is too
close. Verify the safety
of the surrounding area
and reduce vehicle
speed.
When the Mazda Radar
Cruise Control (MRCC)
is operating, the beep
sounds and the Mazda
Radar Cruise Control
(MRCC) warning
light (amber) in the
instrument cluster turns
on. A malfunction in the
system may be indicated.
Have your vehicle
inspected at an expert
repairer, we recommend
an Authorised Mazda
Repairer.
Outside Temperature Warning
Beep*
Warns the driver of the possibility of icy
roads when the outside temperature is low.
If the outside temperature is lower than
about 4 °C, a beep sound is heard once and
the outside temperature display fl ashes for
about ten seconds. (page 4-30 )
Lane Departure Warning System
(LDWS) Warning Sound *
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
  The volume of the LDWS warning
sound can be changed.
 Refer to Personalisation Features on
page 9-13 .
  The type of the LDWS warning
sound can be changed.
 Refer to Personalisation Features on
page 9-13 .
Blind Spot Monitoring (BSM)
System Warning Beep *
Driving forward
The warning beep operates when the
direction indicator lever is operated to
the side where the Blind Spot Monitoring
(BSM) warning light is illuminated.
$9@&;&&%@&EJUJPOJOEC







*Some models.7–54
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
NOTE
A personalised function is available
to change the Blind Spot Monitoring
(BSM) warning beep sound volume.
Refer to Personalisation Features on
page 9-13 .
Reversing
If a moving object such as a vehicle or
two-wheeled vehicle approaches on the
left or right from behind your vehicle, the
Blind Spot Monitoring (BSM) warning
sound is activated.
Electronic Steering Lock Warning
Beep
The warning beep operates if the steering
wheel is not unlocked after the push button
start is pressed. (page 4-4 )
Speed Limiter Warning Beep *
If the vehicle speed exceeds the set speed
by about 3 km/h (2 mph) or more, a
warning beep operates continuously. The
warning beep operates until the vehicle
speed decreases to the set speed or less.
Collision Warning *
If there is the possibility of a collision
with a vehicle ahead, the beep sounds
continuously and a warning is indicated in
the display.
Power Steering Warning Buzzer
If the power steering system has
a malfunction, the power steering
malfunction light turns on or fl ashes and
the buzzer operates at the same time.
Refer to Warning/Indicator Lights on page
4-36 .
Over Rev. Buzzer *
The buzzer sounds to notify the driver if
the engine speed is about to exceed the
permissible engine speed.
CAUTION
Operate the accelerator and shift gears
according to the driving conditions so
that the buzzer does not sound. If the
engine speed exceeds the permissible
engine speed, the engine could be
damaged.
$9@&;&&%@&EJUJPOJOEC







9–15
Specifi cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings change method
Safety
Distance
Recognition
Support
System
(DRSS)
Refer to
Distance
Recognition
Support
System
(DRSS) on
page 4-118 . The system can be
changed so that
Distance Recognition
Support System
(DRSS) does not
operate.
*1
On On/Off Refer to
Settings
on page
5-65 . —
The distance at which
the vehicle ahead
indicator in the display
fl ashes can be changed. Near Far/Medium/
Near Refer to
Settings
on page
5-65 . —
Vehicle Power door
lock
Refer to
Auto Lock/
Unlock
Function
on page
3-16 . Changes the auto
lock/unlock function
setting for all the
doors according to
the vehicle speed, the
vehicle power supply
condition, and the
selector lever position. Lock:
When
Driving
Unlock:
IGN Off Lock: When
Driving
Unlock: In
Park/
Lock: Out of
Park Unlock:
In Park/
Lock: Shifting
Out of Park/
Lock: When
Driving
Unlock: IGN
Off/
Lock: When
Driving/
Off
Refer to
Settings
on page
5-65 . Refer to
Auto Lock/
Unlock
Function
on page
3-16 .
Keyless
entry
system
Refer to
Keyless
Entry
System on
page 3-3 . The time required for
the doors to relock
automatically after
unlocking with the
transmitter can be
changed. 30 seconds 90 seconds/
60 seconds/
30 seconds
Refer to
Settings
on page
5-65 . —
$9@&;&&%@&EJUJPOJOEC







9–16
Specifi cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings change method
Vehicle Advanced
keyless
entry
system
Refer to
Advanced
Keyless
Entry
System on
page 3-8 . The
volume of
the answer-
back beep
during
advanced
keyless
entry
system
operation
can be
changed. European
models Off
High/
Medium/
Low/
Off
Refer to
Settings
on page
5-65 .
Refer to
Locking,
Unlocking
with
Request
Switch
(With the
advanced
keyless
function)
on page
3-13 .
Except
European
models Medium
The function to
automatically lock the
doors when leaving the
vehicle while carrying
the key can be changed. Off On/Off
Refer to
Settings
on page
5-65 . —
The time required
for the doors to
relock automatically
after unlocking with
the request switch/
transmitter can be
changed. 30 seconds 90 seconds/
60 seconds/
30 seconds
Refer to
Settings
on page
5-65 . —
Illumination
entry
Refer to
Illuminated
Entry
System on
page 5-147 .
The time required for
the interior lamp to turn
off automatically can
be changed (prevents
battery depletion when
a door is open/ajar). 30 minutes 60 minutes/
30 minutes/
10 minutes
Refer to
Settings
on page
5-65 . —
The time required for
the interior lamp to turn
off automatically after
all doors are closed can
be changed. 15 seconds 60 seconds/
30 seconds/
15 seconds/
7.5 seconds Refer to
Settings
on page
5-65 . —
Auto-wiper
control
Refer to
Windscreen
Wipers and
Washer on
page 4-68 .
The auto-wiper control
function can be
changed. On On/Off *4 Refer to
Settings
on page
5-65 . —
$9@&;&&%@&EJUJPOJOEC







9–18
Specifi cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings change method
Vehicle Coming
home light
system
Refer to
Coming
Home
Light
System on
page 4-63 . The time required for
the headlights to turn
off after closing all
of the doors can be
changed. 30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/
Off
Refer to
Settings
on page
5-65 . —
Leaving
home light
system
Refer to
Leaving
Home
Light
System on
page 4-63 . The leaving home light
system function can be
changed. On or Off On/Off
Refer to
Settings
on page
5-65 . —
Turn
indicator
Refer to
Turn and
Lane-
Change
Signals on
page 4-67 . The turn indicator beep
volume level can be
changed. High High/Low
Refer to
Settings
on page
5-65 . —
Three-fl ash
turn signal
Refer to
Three-
Flash Turn
Signal on
page
4-68 . The three-fl ash turn
function can be
changed. On or Off On/Off
Refer to
Settings
on page
5-65 . —
$9@&;&&%@&EJUJPOJOEC