2015 MAZDA MODEL CX-3 warning

*Some models.7–54
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
NOTE
A personalised function is available
to change the Blind Spot Monitoring
(BSM) warning beep sound volume.
Refer to Personalisation Features on
page 9-13 .
Reversing
If a moving object such as a vehicle or
two-wheeled vehicle approaches on the
left or right from behind your vehicle, the
Blind Spot Monitoring (BSM) warning
sound is activated.
Electronic Steering Lock Warning
Beep
The warning beep operates if the steering
wheel is not unlocked after the push button
start is pressed. (page 4-4 )
Speed Limiter Warning Beep *
If the vehicle speed exceeds the set speed
by about 3 km/h (2 mph) or more, a
warning beep operates continuously. The
warning beep operates until the vehicle
speed decreases to the set speed or less.
Collision Warning *
If there is the possibility of a collision
with a vehicle ahead, the beep sounds
continuously and a warning is indicated in
the display.
Power Steering Warning Buzzer
If the power steering system has
a malfunction, the power steering
malfunction light turns on or fl ashes and
the buzzer operates at the same time.
Refer to Warning/Indicator Lights on page
4-36 .
Over Rev. Buzzer *
The buzzer sounds to notify the driver if
the engine speed is about to exceed the
permissible engine speed.
CAUTION
Operate the accelerator and shift gears
according to the driving conditions so
that the buzzer does not sound. If the
engine speed exceeds the permissible
engine speed, the engine could be
damaged.
$9@&;&&%@&EJUJPOJOEC







8–1
8Customer Information
Important consumer information including warranties and add-on
equipment.



Warranty ............................................................................................. 8-2
Registering Your Vehicle in A Foreign Country ........................... 8-2
Add-On Non-Genuine Parts and Accessories ............................... 8-3
Cell Phones ......................................................................................... 8-4
Cell Phones Warning ..................................................................... 8-4
Recording of Vehicle Data ................................................................. 8-5
Recording of Vehicle Data ............................................................ 8-5
Declaration of Conformity ................................................................ 8-6
Declaration of Conformity ............................................................ 8-6
Electromagnetic Compatibility ....................................................... 8-20
Electromagnetic Compatibility ................................................... 8-20
Collection/Disposal of Old Equipment/Used Battery ................... 8-22
Information for Users on Collection and Disposal of Old
Equipment and Used Batteries .................................................... 8-22
$9@&;&&%@&EJUJPOJOEC







8–3
Customer Information
Warranty
Add-On Non-Genuine Parts and Accessories
Please note that technical alterations to the original state of your Mazda vehicle can affect
the safety of the vehicle. Such technical alterations include not only the use of unsuitable
spare parts, but also accessories, fi ttings or attachments, including rims and tyres.
Genuine Mazda Parts and Genuine Mazda Accessories have been specifi cally designed for
Mazda vehicles.
Other parts and accessories than those mentioned above have not been examined and
approved by Mazda unless explicitly stated by Mazda. We cannot certify the suitability of
such products. Mazda is not liable for any damage caused by the use of such products.
WARNING
Be very careful in choosing and installing add-on electrical equipment, such as mobile
telephones, two-way radios, stereo systems, and car alarm systems:
Incorrectly choosing or installing improper add-on equipment or choosing an improper
installer is dangerous. Essential systems could be damaged, causing engine stalling,
air-bag (SRS) activation, ABS/TCS/DSC inactivation, or a fi re in the vehicle.
Mazda assumes no responsibility for death, injury, or expenses that may result from the
installation of add-on non-genuine parts or accessories.
$9@&;&&%@&EJUJPOJOEC







8–4
Customer Information
Cell Phones
Cell Phones Warning
WARNING
Please comply with the legal regulations concerning the use of communication
equipment in vehicles in your country:
Use of any electrical devices such as cell phones, computers, portable radios, vehicle
navigation or other devices by the driver while the vehicle is moving is dangerous.
Dialing a number on a cell phone while driving also ties-up the driver's hands. Use of
these devices will cause the driver to be distracted and could lead to a serious accident.
If a passenger is unable to use the device, pull off the right-of-way to a safe area before
use. If use of a cell phone is necessary despite this warning, use a hands-free system
to at least leave the hands free to drive the vehicle. Never use a cell phone or other
electrical devices while the vehicle is moving and, instead, concentrate on the full-time
job of driving.
$9@&;&&%@&EJUJPOJOEC







9–13
Specifi cations
Personalisation Features
Personalisation Features
The following personalisation features can be set or changed by an Authorised Mazda
Repairer. Consult an Authorised Mazda Repairer for details.
Additionally, some of the personalisation features can be changed by the customer
depending on the feature.
Personalisation features which can be changed differ depending on the market and
specifi cation.
Settings can be changed by operating the centre display screen.
Settings can be changed by operating the vehicle switches.
Settings can be changed by an Authorised Mazda Repairer.
Item Feature Factory
Setting Available
Settings Settings change method
Safety
Smart
City Brake
Support
(SCBS)
Refer to
Smart
City Brake
Support
(SCBS) on
page 4-139 .
The system can be
changed so that Smart
City Brake Support
(SCBS) does not
operate.
*1
On On/Off Refer to
Settings
on page
5-65 .
Refer to
Stopping
The Smart
City Brake
Support
(SCBS)
System
Operation
on page
4-143 . —
Smart
Brake
Support
(SBS)
Refer to
Smart
Brake
Support
(SBS) on
page 4-145 .
The system can be
changed so that Smart
Brake Support (SBS)
does not operate.
*1
On On/Off Refer to
Settings
on page
5-65 . —
The distance at which
the collision warning
activates can be
changed. Near Near/Far Refer to
Settings
on page
5-65 . —
The volume of the
collision warning can
be changed. High High/Low/Off Refer to
Settings
on page
5-65 . —
$9@&;&&%@&EJUJPOJOEC







9–14
Specifi cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings change method
Safety Lane
Departure
Warning
System
(LDWS)
Refer
to Lane
Departure
Warning
System
(LDWS)
on page
4-105 . The warning sound
for the Lane Departure
Warning System
(LDWS) can be
changed.
*2
Rumbl. Beep/Rumbl. Refer to
Settings
on page
5-65 . —
The
volume of
the warning
sound for
the Lane
Departure
Warning
System
(LDWS)
can be
changed. Rumbl. Low High/Mid/
Low
Refer to
Settings
on page
5-65 . —
Beep Low High/Low Refer to
Settings
on page
5-65 . —
The sensitivity of the
warning for the Lane
Departure Warning
System (LDWS) can be
changed. Medium Often/
Medium/Rare Refer to
Settings
on page
5-65 . —
The warning timing
in which the Lane
Departure Warning
System (LDWS)
determines that
the vehicle may be
deviating from its lane
can be changed. Adaptive Adaptive/
Early/
Medium/
Late
Refer to
Settings
on page
5-65 . —
Blind Spot
Monitoring
(BSM)
system
Refer to
Blind Spot
Monitoring
(BSM)
System on
page 4-111 . The volume of the
BSM warning beep can
be changed.
*3 High High/
Low/
Off Refer to
Settings
on page
5-65 . —
$9@&;&&%@&EJUJPOJOEC







9–17
Specifi cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings change method
Vehicle Running
lights
Refer to
Running
Lights on
page
4-64 . The function of the
running lights can be
changed. On On/
Off
Refer to
Settings
on page
5-65 . —
Auto-light
control
Refer to
Headlights
on page
4-58 . The headlight
illumination on/
off timing based on
surrounding lightness/
darkness can be
changed. Medium High/
Med. High/
Medium/
Med. Low/
Low
Refer to
Settings
on page
5-65 . —
High Beam
Control
System
(HBC)
Refer to
High Beam
Control
System
(HBC) on
page
4-102 . The High Beam
Control System
(HBC) function can be
changed.
*1
On On/Off Refer to
Settings
on page
5-65 . —
Adaptive
Front
Lighting
System
(AFS)
Refer to
Adaptive
Front
Lighting
System
(AFS) on
page
4-101 . The Adaptive Front
Lighting System
(AFS) function can be
changed.
*1
On On/Off Refer to
Settings
on page
5-65 . —
Lights-on
reminder
Refer to
Lights-On
Reminder
on page
7-50 . The volume of the
lights-on reminder
warning alarm can be
changed. High High/Low/Off
Refer to
Settings
on page
5-65 . —
$9@&;&&%@&EJUJPOJOEC







9–20
Specifi cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings change method
Fuel
Economy
Monitor
Refer
to Fuel
Economy
Monitor on
page 4-88 . Ending
display Setting can be changed
so that the ending
display of the Fuel
Economy Monitor is
displayed. Off On/Off
Refer
to Fuel
Economy
Monitor
on page
4-88 . —
Fuel
economy
resetting
procedure Setting can be changed
so that the fuel
economy reset is linked
with the trip meter
reset. Off On/Off Refer
to Fuel
Economy
Monitor
on page
4-88 . —
Active
driving
display
Refer to
Active
Driving
Display on
page 4-34 . Turn-by-
Turn (TBT) Setting can be changed
so that the Turn-by-
Turn (TBT) of the
Active driving display
is not displayed. On On/Off
Refer to
Active
Driving
Display
on page
4-34 . —
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traffi c Alert (RCTA) operation cannot be changed.
*4 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*5 Available only in display from the centre display.
$9@&;&&%@&EJUJPOJOEC