2015 MAZDA MODEL 6 change time

Black plate (501,1)
qLane Departure Warning System
(LDWS) Warning Soundí
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
lThe volume of the LDWS warning sound
can be changed.
Refer to Personalization Features on page
9-9.
lThe type of the LDWS warning sound can
be changed.
Refer to Personalization Features on page
9-9.
qBlind Spot Monitoring (BSM)
System Warning Beepí
Driving forward
The warning beep operates when the turn
signal lever is operated to the side where
the BSM warning light is illuminated.
NOTE
A personalized function is available to change
the BSM warning beep sound volume. Refer to
Personalization Features on page 9-9.
Reversing
If vehicles approach from the rear on the
left and right, the Blind Spot Monitoring
(BSM) warning beep operates.
qMazda Radar Cruise Control
(MRCC) System Warningsí
The Mazda Radar Cruise Control
(MRCC) system warnings notify the
driver of system malfunctions and
cautions on use when required.
Check based on the beep sound.
Cautions What to check
The beep sounds 1 time
while the Mazda Radar
Cruise Control (MRCC)
is operatingThe vehicle speed is
slower than 25 km/h
(16 mph) and the Mazda
Radar Cruise Control
(MRCC) system has been
canceled.
The beep sounds 5 times
while drivingThe distance between
your vehicle and the
vehicle ahead is too
close. Verify the safety of
the surrounding area and
reduce vehicle speed.
When the Mazda Radar
Cruise Control (MRCC)
is operating, the beep
sounds and the Mazda
Radar Cruise Control
(MRCC) warning light
(amber) in the instrument
cluster flashes.A malfunction in the
system may be indicated.
Have your vehicle
inspected at an
Authorized Mazda
Dealer.
qCollision warningí
If there is the possibility of a collision
with a vehicle or obstruction ahead, the
beep sounds continuously and a warning
is indicated in the display.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-41íSome models. Mazda6_8DQ8-EA-13L_Edition3 Page501
Friday, June 13 2014 6:23 PM
Form No.8DQ8-EA-13L

Black plate (563,1)
Personalization Features
The following personalization feature is available. This setting can only be changed by an Authorized Mazda
Dealer.
Items in which the feature setting can be changed differ depending on the market and specification.
Item Feature Factory Setting Available Settings
Daytime running
lightsThe function of the daytime running lights can be
changed.OnOn/
Off
Personalization Features
9-9
Mazda6_8DQ8-EA-13L_Edition3 Page563
Friday, June 13 2014 6:23 PM
Form No.8DQ8-EA-13L

Black plate (564,1)
The following personalization features can be changed by the vehicle owner.
Items in which the feature setting can be changed differ depending on the market and specification.
Item Feature Factory Setting Available Settings
Power door lockChanges the auto lock/unlock function setting for all
the doors according to the vehicle speed, the vehicle
power supply condition, and the selector lever
position.
Refer to Auto Lock/Unlock Function on page 3-15.
Refer to Setup on page 5-55.Lock: Driving,
Unlock: IGN
OffOff/
Lock When Driving/
Lock: Driving,
Unlock: IGN Off/
Lock When Shifting
Out Of P/
Lock: Shift From P,
Unlock: In P
Keyless entry
systemThe method for unlocking the doors using the
transmitter can be changed.
Refer to Transmitter on page 3-4.
Refer to Setup on page 5-55.Once: Driver's,
Twice: All
DoorsTouch Once: All
Doors/
Once: Driver's,
Twice: All Doors
The time required for the doors to relock
automatically after unlocking with the transmitter can
be changed.
Refer to Setup on page 5-55.60 seconds90 seconds/
60 seconds/
30 seconds
Advanced keyless
entry systemThe volume of the answer-back beep during advanced
keyless entry system operation can be changed.
Refer to Locking, Unlocking with Request Switch
(With the advanced keyless function) on page 3-13.
Refer to Setup on page 5-55.MediumHigh/
Medium/
Low/
Off
The function to automatically lock the doors when
leaving the vehicle while carrying the key can be
changed.
Refer to Setup on page 5-55.OffOn/
Off
The method for unlocking the doors using the request
switch/transmitter can be changed.
Refer to Transmitter on page 3-4.
Refer to Locking, Unlocking with Request Switch
(With the advanced keyless function) on page 3-13.
Refer to Setup on page 5-55.Once: Driver's,
Twice: All
DoorsTouch Once: All
Doors/
Once: Driver's,
Twice: All Doors
The time required for the doors to relock
automatically after unlocking with the request
switch/transmitter can be changed.
Refer to Setup on page 5-55.60 seconds90 seconds/
60 seconds/
30 seconds
Illumination entryThe time required for the interior lamp to turn off
automatically can be changed
(prevents battery depletion when a door is open/ajar).
Refer to Setup on page 5-55.30 minutes60 minutes/
30 minutes/
10 minutes
The time required for the interior lamp to turn off
automatically after all doors are closed can be
changed.
Refer to Setup on page 5-55.15 seconds60 seconds/
30 seconds/
15 seconds/
7.5 seconds
Three-flash turn
signalThe three-flash turn function can be changed.
Refer to Setup on page 5-55.OnOn/
Off
Auto-wiper controlThe auto-wiper control function can be changed.
Refer to Setup on page 5-55.On
(Rain Sensing)On (Rain Sensing)/
Off (Intermittent)
*1
9-10
Personalization Features
Mazda6_8DQ8-EA-13L_Edition3 Page564
Friday, June 13 2014 6:23 PM
Form No.8DQ8-EA-13L

Black plate (565,1)
Item Feature Factory Setting Available Settings
Auto headlight
off
*2The time required for headlights to turn off after
ignition is switched off can be changed.
Refer to Setup on page 5-55.30 seconds120 seconds/
90 seconds/
60 seconds/
30 seconds/
0 seconds
*3
Auto-light controlThe headlight illumination on/off timing based on
surrounding lightness/darkness can be changed.
Refer to Setup on page 5-55.MediumLight/
Medium Light/
Medium/
Medium Dark/
Dark
High Beam
Control System
(HBC)The High Beam Control System (HBC) function can
be changed.
*4
Refer to Setup on page 5-55.OnOn/
Off
Turn indicatorThe turn indicator beep volume level can be changed.
Refer to Trip Computer and INFO Switch on page
4-18.HighHigh/
Low
Lights-on
reminder
*5
The volume of the lights-on reminder warning alarm
can be changed.
Refer to Trip Computer and INFO Switch on page
4-18.OFFHigh/
Low/
OFF
Blind Spot
Monitoring (BSM)
systemThe volume of the BSM warning beep can be
changed.
*6
Refer to Trip Computer and INFO Switch on page
4-18.HighHigh/
Low/
OFF
Lane Departure
Warning System
(LDWS)The warning sound for the Lane Departure
Warning System (LDWS) can be
changed.
*7
Refer to Trip Computer and INFO Switch
on page 4-18.U.S.A. Beep
Rumble/
Beep Except
U.S.A.Rumble
The volume of the warning
sound for the Lane Departure
Warning System (LDWS) can
be changed.
Refer to Trip Computer and
INFO Switch on page 4-18.RumbleU.S.A. High
High/
Medium/
Low Except
U.S.A.Low
BeepU.S.A. High
High/
Low Except
U.S.A.Low
The sensitivity of the warning for the Lane Departure
Warning System (LDWS) can be changed.
Refer to Trip Computer and INFO Switch on page
4-18.LowHigh/
Low
The warning timing in which the Lane Departure
Warning System (LDWS) determines that the vehicle
may be deviating from its lane can be changed.
Refer to Trip Computer and INFO Switch on page
4-18.Before lineBefore line/
At line
Personalization Features
9-11
Mazda6_8DQ8-EA-13L_Edition3 Page565
Friday, June 13 2014 6:23 PM
Form No.8DQ8-EA-13L

Black plate (566,1)
Item Feature Factory Setting Available Settings
Multi-information
display operation
soundThe operation sound volume for the following
operations can be changed.
lTrip computer data clearing
The INFO switch is pressed for 1.5 seconds or
longer while the average fuel economy or average
vehicle speed is displayed.
lNumerical value scroll
The Up/Down switch is pressed for 1.5 seconds or
longer, such as while the maintenance monitor
period setting screen is displayed.
Refer to Trip Computer and INFO Switch on page
4-18.HighHigh/
Low/
OFF
Meter displayThe distance unit can be changed.
Refer to Trip Computer and INFO Switch on page
4-18.miles or kmkm/
miles
The display language can be changed.
Refer to Trip Computer and INFO Switch on page
4-18.English, French,
or SpanishEnglish/
French/
Spanish
The temperature unit can be changed.
Refer to Trip Computer and INFO Switch on page
4-18.°F or °C°C/
°F
Forward
Obstruction
Warning (FOW)The system can be changed so that Forward
Obstruction Warning (FOW) does not operate.
*4
Refer to Trip Computer and INFO Switch on page
4-18.ONON/
OFF
The distance at which the collision warning activates
can be changed.
Refer to Trip Computer and INFO Switch on page
4-18.NearNear/
Far
The volume of the collision warning can be changed.
Refer to Trip Computer and INFO Switch on page
4-18.HighHigh/
Low/
OFF
Smart City Brake
Support (SCBS)The system can be changed so that Smart City Brake
Support (SCBS) does not operate.
*4
Refer to Trip Computer and INFO Switch on page
4-18.ONON/
OFF
*1 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*2 If the setting is changed to 0 seconds, the following operation is performed according to the headlight switch
position:
lAtposition: Headlights turn off immediately after the ignition is switched off.lAt any position other than: Headlights do not turn off after the ignition is switched off.
*3 When set to 0 seconds, the lights-on reminder is operable.
*4 Though these systems can be turned OFF, doing so will defeat the purpose of the system and Mazda
recommends that these systems remain ON.
*5 The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to
0 seconds. Refer to Lights-On Reminder on page 7-38.
*6 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.
*7 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be
changed. The warning sound is only a beep.
9-12
Personalization Features
Mazda6_8DQ8-EA-13L_Edition3 Page566
Friday, June 13 2014 6:23 PM
Form No.8DQ8-EA-13L