2015 MAZDA MODEL 3 HATCHBACK display

*Some models.7–51
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Key Left-in-luggage Compartment
Warning Beep (With the advanced
keyless function)
If the key is left in the boot with all doors
locked and the boot lid closed, a beep
sound is heard for about 10 seconds to
remind the driver the key has been left in
the boot. If this happens, open the boot
lid by pressing the electric boot lid opener
and remove the key. A key removed from
the boot may not function because its
functions may have been temporarily
suspended. To restore the key function,
perform the applicable procedure (page
3-8 ).
Key Left-in-vehicle Warning Beep
(With the advanced keyless
function)
If a key is left in the vehicle cabin and all
the doors and the boot are locked using
a separate key, a beep sound is heard for
about 10 seconds to remind the driver
that the key has been left in the vehicle
cabin. If this happens, open the door and
remove the key. A key removed from the
vehicle this way may not function because
its functions may have been temporarily
suspended. Perform the applicable
procedure to restore the functions of the
key (page 3-8 ).
i-stop Warning Beep
















 If the driver's door is opened while
engine idling is stopped, the warning
sound operates to notify the driver that
engine idling is stopped. It stops when
the driver's door is closed.
 


 The warning sound operates if the
following operations are performed
while the engine idling is stopped. In
such cases, the engine does not restart
automatically to ensure safety. Start the
engine using the normal method.
 

 
(European model)
 The driver's seat belt is unfastened and
the driver's door is opened.
 

 
(Except European model)



 
(Manual transaxle)
 With the shift lever in a position other
than neutral, the driver's seat belt is
unfastened and the driver's door is
opened.
 

 
(Automatic transaxle)
 With the selector lever in the D or
M (not in second gear fi xed mode)
position, the driver's seat belt is
unfastened and the driver's door is
opened.
i-ELOOP Warning Beep *
The beep will activate if you attempt to
drive the vehicle under the following
conditions.
 


 The i-ELOOP indicator light is fl ashing
green.
 


 “i-ELOOP Charging” is indicated in the
centre display (Type C/Type D audio).
The beep will stop when the vehicle is
stopped. Make sure the indicator light is
no longer illuminated and the message
is no longer displayed before driving the
vehicle.
.B[EB@&'&&"@&EJUJPOJOEC







*Some models.7–52
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Vehicle Speed Alarm *
The vehicle speed alarm function is
designed to alarm the driver via a single
beep sound and a warning indication in the
instrument cluster that the previously set
vehicle speed has been exceeded.
You can change the vehicle speed setting
at which the warning is triggered (page
4-30 ).
Tyre Infl ation Pressure Warning
Beep*
The warning beep sound will be heard
for about 3 seconds when there is any
abnormality in tyre infl ation pressures
(page 4-161 ).
Outside Temperature Warning
Beep
Warns the driver of the possibility of icy
roads when the outside temperature is low.
If the outside temperature is lower than
about 4 °C, a beep sound is heard once and
the outside temperature display fl ashes for
about ten seconds. (page 4-29 )
Rear Vehicle Monitoring (RVM)
System Warning Chime *
The warning chime activates at the same
time the RVM warning indicator light
begins fl ashing to alert the driver.
NOTE
A personalised function is available
to change the warning chime sound
volume.
Refer to Personalisation Features on
page 9-16 .
Lane Departure Warning System
(LDWS) Warning Sound *
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
  The volume of the LDWS warning
sound can be changed.
 Refer to Personalisation Features on
page 9-16 .
  The type of the LDWS warning
sound can be changed.
 Refer to Personalisation Features on
page 9-16 .
Electronic Steering Lock Warning
Beep
The warning beep operates if the steering
wheel is not unlocked after the push button
start is pressed. (page 4-4 )
.B[EB@&'&&"@&EJUJPOJOEC







*Some models.7–53
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Mazda Radar Cruise Control
(MRCC) System Warnings *
The Mazda Radar Cruise Control (MRCC)
system warnings notify the driver of
system malfunctions and cautions on use
when required.
Check based on the beep sound.
Cautions What to check
The beep sounds 1 time
while the Mazda Radar
Cruise Control (MRCC)
is operating The vehicle speed is
slower than 25 km/h (16
mph) and the Mazda
Radar Cruise Control
(MRCC) system has
been cancelled.
(European models)
The beep sounds 5 times
while driving
(Except European
models)
The beep continues to
sound while the vehicle
is being driven. The distance between
your vehicle and the
vehicle ahead is too
close. Verify the safety
of the surrounding area
and reduce vehicle
speed.
When the Mazda
Radar Cruise Control
(MRCC) is operating,
the beep sounds and the
Mazda Radar Cruise
Control (MRCC)
warning light (amber)
in the instrument cluster
fl ashes. A malfunction in the
system may be indicated.
Have your vehicle
inspected at an expert
repairer, we recommend
an Authorised Mazda
Repairer.
Speed Limiter Warning Beep *
If the vehicle speed exceeds the set speed
by about 3 km/h (2 mph) or more, a
warning beep operates continuously. The
warning beep operates until the vehicle
speed decreases to the set speed or less.
Collision Warning *
If there is the possibility of a collision
with a vehicle ahead, the beep sounds
continuously and a warning is indicated in
the display.
120 km/h Warning Beep *
If the vehicle speed exceeds 120 km/h, a
chime sounds for 5 seconds.
Power Steering Warning Buzzer
If the power steering system has
a malfunction, the power steering
malfunction light turns on or fl ashes and
the buzzer operates at the same time.
Refer to Warning/Indicator Lights on page
4-40 .
Over Rev. Buzzer *
The buzzer sounds to notify the driver if
the engine speed is about to exceed the
permissible engine speed.
CAUTION
Operate the accelerator and shift gears
according to the driving conditions so
that the buzzer does not sound. If the
engine speed exceeds the permissible
engine speed, the engine could be
damaged.
.B[EB@&'&&"@&EJUJPOJOEC







7–56
If Trouble Arises
Active Driving Display Does Not Operate
If the Active Driving
Display does not operate
If the active driving display does not
operate, switch the ignition off and
then restart the engine. If the active
driving display does not operate even
with the engine restarted, have the
vehicle inspected at an expert repairer,
we recommend an Authorised Mazda
Repairer.
.B[EB@&'&&"@&EJUJPOJOEC







9–16
Specifi cations
Personalisation Features
Personalisation Features
The following personalisation features can be set or changed by an Authorised Mazda
Repairer. Consult an Authorised Mazda Repairer for details.
Additionally, some of the personalisation features can be changed by the customer
depending on the feature.
Personalisation features which can be changed differ depending on the market and
specifi cation.
Settings can be changed by operating the centre display screen.
Settings can be changed by operating the vehicle switches.
Settings can be changed by an Authorised Mazda Repairer.
Item Feature Factory
Setting Available
Settings Settings change method
Safety Smart
City Brake
Support
(SCBS)
Refer to
Smart
City Brake
Support
(SCBS) on
page 4-139 . The system can be
changed so that Smart
City Brake Support
(SCBS) does not
operate.
*1
On On/Off Refer to
Settings
on page
5-71 .
Refer to
Stopping
The Smart
City Brake
Support
(SCBS)
System
Operation
on page
4-144 . —
Smart Brake
Support
(SBS)
Refer to
Smart Brake
Support
(SBS) on
page 4-145 . The system can be
changed so that Smart
Brake Support (SBS)
does not operate.
*1
On On/Off Refer to
Settings
on page
5-71 . —
The distance at which
the collision warning
activates can be
changed. Near Near/Far Refer to
Settings
on page
5-71 . —
The volume of the
collision warning can
be changed. High High/Low/
Off Refer to
Settings
on page
5-71 . —
.B[EB@&'&&"@&EJUJPOJOEC







9–18
Specifi cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings change method
Safety Distance
Recognition
Support
System
(DRSS)
Refer to
Distance
Recognition
Support
System
(DRSS) on
page 4-120 . The system can be
changed so that
Distance Recognition
Support System (DRSS)
does not operate.
*1
On On/Off Refer to
Settings
on page
5-71 . —
The distance at which
the vehicle ahead
indicator in the display
fl ashes can be changed. Near Far/Medium/
Near Refer to
Settings
on page
5-71 . —
Vehicle Power door
lock
Refer to
Auto Lock/
Unlock
Function on
page 3-17 . Changes the auto
lock/unlock function
setting for all the doors
according to the vehicle
speed, the vehicle
power supply condition,
and the selector lever
position. Lock: When
Driving
Unlock: IGN
Off Lock: Out of
Park Unlock:
In Park/
Lock:
Shifting Out
of Park/
Lock: When
Driving
Unlock: IGN
Off/
Lock: When
Driving/
Off
Refer to
Settings
on page
5-71 . Refer to
Auto Lock/
Unlock
Function
on page
3-17 .
Keyless
entry system
Refer to
Keyless
Entry
System on
page 3-3 . The time required for
the doors to relock
automatically after
unlocking with the
transmitter can be
changed. 30 seconds 90 seconds/
60 seconds/
30 seconds
Refer to
Settings
on page
5-71 . —
.B[EB@&'&&"@&EJUJPOJOEC







9–21
Specifi cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings change method
Vehicle Turn
indicator
Refer to
Turn and
Lane-
Change
Signals on
page 4-72 . The turn indicator beep
volume level can be
changed. High High/Low
Refer to
Settings
on page
5-71 . —
Three-fl ash
turn signal
Refer to
Three-Flash
Turn Signal
on page
4-73 . The three-fl ash turn
function can be
changed. On or Off On/Off
Refer to
Settings
on page
5-71 . —
System Distance
unit The distance unit can be
changed. mi or km mi/km
Refer to
Settings
on page
5-71 . —
Language The display language
can be changed. English English/
French/
German/
Italian/
Spanish/
Russian/
Portuguese/
Dutch/
Swedish/
Danish/
Norwegian/
Finnish/
Czech
*7 /
Slovakian *7 /
Hungarian *7 /
Turkish *7 /
Polish *7 /
Estonian *7 /
Latvian *7 /
Lithuanian *7 /
Greek *7 /
Croatian *7 /
Bulgarian *7 /
Romanian *7 /
Serbian *7 /
Hebrew *7 /
Arabic *7 /
Malaysian *7 /
Thai *7 /
Indonesian *7 /
Taiwanese *7
Refer to
Settings
on page
5-71 . —
.B[EB@&'&&"@&EJUJPOJOEC







9–22
Specifi cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings change method
System Temperature
unit The temperature unit
can be changed. °C °F/°C Refer to
Settings
on page
5-71 . —
Fuel
Economy
Monitor
Refer
to Fuel
Economy
Monitor
on page
4-94 . Ending
display Setting can be changed
so that the ending
display of the Fuel
Economy Monitor is
displayed. Off On/Off
Refer
to Fuel
Economy
Monitor
on page
4-94 . —
Fuel
economy
resetting
procedure Setting can be changed
so that the fuel
economy reset is linked
with the trip meter
reset. Off On/Off Refer
to Fuel
Economy
Monitor
on page
4-94 . —
Active
driving
display
Refer to
Active
Driving
Display
on page
4-38 . Turn-by-
Turn (TBT) Setting can be changed
so that the Turn-by-
Turn (TBT) of the
Active driving display
is not displayed. On On/Off
Refer to
Active
driving
display
on page
4-38 . —
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*3 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*4 If the setting is changed to Off, the following operation is performed according to the headlight switch position:
At position: Headlights turn off immediately after the ignition is switched off. At any position other than : Headlights do not turn off after the ignition is switched off.
*5 When set to Off, the lights-on reminder is operable.
*6 The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to
Off. Refer to Lights-On Reminder on page 7-49 .
*7 Available only in display from the centre display.
.B[EB@&'&&"@&EJUJPOJOEC