2015 MAZDA MODEL 3 HATCHBACK alarm

*Some models.4–32
When Driving
Instrument Cluster and Display
Multi-information Display *
INFO switch Multi-information Display
The multi-information display indicates the following information.
The screen content changes each time the INFO up or down button is pressed.
 


 Maximum driving distance



 Average fuel economy



 Instantaneous fuel economy



 Average vehicle speed



 Speed alarm



 LDWS display



 Warning message
.B[EB@&'&&"@&EJUJPOJOEC







4–36
When Driving
Instrument Cluster and Display
Current Fuel Economy Mode
This mode displays the current fuel economy by calculating the amount of fuel consumption
and the distance travelled.
Current fuel economy will be calculated and displayed every 2 seconds.
When you've slowed to about 5 km/h (3 mph), - - - L/100 km (- - - mpg) will be displayed.
Average Vehicle Speed Mode
This mode displays the average vehicle speed by calculating the distance and the time
travelled since connecting the battery or resetting the data.
Average vehicle speed will be calculated and displayed every 10 seconds.
To clear the data being displayed, press the INFO button for more than 1.5 seconds. After
pressing the INFO button, - - - km/h (- - - mph) will be displayed for about 1 minute before
the vehicle speed is recalculated and displayed.
Vehicle Speed Alarm
In this mode, the current setting for the vehicle speed alarm is displayed.
You can change the vehicle speed setting at which the warning is triggered.
NOTE
The vehicle speed alarm display is activated at the same time the beep sound is heard. The
set vehicle speed fl ashes several times.
The vehicle speed alarm can be set using the INFO switch.
.B[EB@&'&&"@&EJUJPOJOEC







4–37
When Driving
Instrument Cluster and Display
NOTE
  Always set the vehicle speed according to the laws and regulations of the country/city
in which the vehicle is driven. In addition, always verify the speed of the vehicle using
the speedometer.
  The vehicle speed alarm function can be set between 30 and 250 km/h (20 and 150
mph).
The vehicle speed alarm can be set using the following procedure.
1. Press the INFO switch on the speed alarm screen.
2. Select ON and press the INFO switch.
3. Set the vehicle speed by pressing the INFO up or down button, and then press the INFO
button.
LDWS Display
Displays the currently set system status.
Refer to Lane Departure Warning System (LDWS) on page 4-107 .
Warning (Display Indication)
A message is displayed to notify the user of the system operation status and malfunctions or
abnormalities.
If the warning light turns on/fl ashes simultaneously or a symbol is indicated in the display,
check the information regarding the warning light or symbol. (page 4-40 )
When only a message is displayed, refer to Message Indicated in Multi-information Display.
(page 7-45 )
.B[EB@&'&&"@&EJUJPOJOEC







5–42
Interior Features
Audio System
(To scan for programme-type
information:)
1. Press the Programme-type information
button (
,) when the programme-
type code is displayed.
2. Press the Programme-type information
button (
,) until the beep sounds.
The unit will scan for broadcasts, if
none are found, “ Nothing ” will be
displayed and the unit will return to the
previously tuned band.
(To store programme types in the
channel preset buttons:)
1. Press the Programme-type information
button (
,) when the programme-
type code is displayed.
2. Press the Programme-type information
button (
,) and select the programme
type.
3. While the programme type is displayed,
press a channel preset button for about
2 seconds.
Emergency broadcast
If an emergency broadcast is received,
the emergency broadcast intercedes even
while using other functions (FM, CD,
USB, iPod, AUX, or BT audio), and
“ Alarm! ” is displayed.
When the emergency broadcast ends, the
system will return to the previous mode.
.B[EB@&'&&"@&EJUJPOJOEC







*Some models.7–52
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Vehicle Speed Alarm *
The vehicle speed alarm function is
designed to alarm the driver via a single
beep sound and a warning indication in the
instrument cluster that the previously set
vehicle speed has been exceeded.
You can change the vehicle speed setting
at which the warning is triggered (page
4-30 ).
Tyre Infl ation Pressure Warning
Beep*
The warning beep sound will be heard
for about 3 seconds when there is any
abnormality in tyre infl ation pressures
(page 4-161 ).
Outside Temperature Warning
Beep
Warns the driver of the possibility of icy
roads when the outside temperature is low.
If the outside temperature is lower than
about 4 °C, a beep sound is heard once and
the outside temperature display fl ashes for
about ten seconds. (page 4-29 )
Rear Vehicle Monitoring (RVM)
System Warning Chime *
The warning chime activates at the same
time the RVM warning indicator light
begins fl ashing to alert the driver.
NOTE
A personalised function is available
to change the warning chime sound
volume.
Refer to Personalisation Features on
page 9-16 .
Lane Departure Warning System
(LDWS) Warning Sound *
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
  The volume of the LDWS warning
sound can be changed.
 Refer to Personalisation Features on
page 9-16 .
  The type of the LDWS warning
sound can be changed.
 Refer to Personalisation Features on
page 9-16 .
Electronic Steering Lock Warning
Beep
The warning beep operates if the steering
wheel is not unlocked after the push button
start is pressed. (page 4-4 )
.B[EB@&'&&"@&EJUJPOJOEC







8–3
Customer Information
Warranty
Add-On Non-Genuine Parts and Accessories
Please note that technical alterations to the original state of your Mazda vehicle can affect
the safety of the vehicle. Such technical alterations include not only the use of unsuitable
spare parts, but also accessories, fi ttings or attachments, including rims and tyres.
Genuine Mazda Parts and Genuine Mazda Accessories have been specifi cally designed for
Mazda vehicles.
Other parts and accessories than those mentioned above have not been examined and
approved by Mazda unless explicitly stated by Mazda. We cannot certify the suitability of
such products. Mazda is not liable for any damage caused by the use of such products.
WARNING
Be very careful in choosing and installing add-on electrical equipment, such as mobile
telephones, two-way radios, stereo systems, and car alarm systems:
Incorrectly choosing or installing improper add-on equipment or choosing an improper
installer is dangerous. Essential systems could be damaged, causing engine stalling,
air-bag (SRS) activation, ABS/TCS/DSC inactivation, or a fi re in the vehicle.
Mazda assumes no responsibility for death, injury, or expenses that may result from the
installation of add-on non-genuine parts or accessories.
.B[EB@&'&&"@&EJUJPOJOEC







9–20
Specifi cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings change method
Vehicle Auto-light
control
Refer to
Headlights
on page
4-62 . The headlight
illumination on/
off timing based on
surrounding lightness/
darkness can be
changed. Medium High/
Med. High/
Medium/
Med. Low/
Low
Refer to
Settings
on page
5-71 . —
Auto
headlight
off
*4
Refer to
Headlights
on page
4-62 . The time required
for headlights to turn
off after ignition is
switched off can be
changed. 30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/
Off
*5
Refer to
Settings
on page
5-71 . —
High Beam
Control
System
(HBC)
Refer to
High Beam
Control
System
(HBC) on
page 4-104 . The High Beam Control
System (HBC) function
can be changed.
*1 On On/Off Refer to
Settings
on page
5-71 . —
Lights-on
reminder*6
Refer to
Lights-On
Reminder on
page 7-49 . The volume of the
lights-on reminder
warning alarm can be
changed. High or Off High/Low/
Off Refer to
Settings
on page
5-71 . —
Coming
home light
system
Refer to
Coming
Home Light
System on
page 4-68 . The time required for
the headlights to turn
off after closing all
of the doors can be
changed. 30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/
Off — —
Leaving
home light
system
Refer to
Leaving
Home Light
System on
page 4-68 . The leaving home light
system function can be
changed. On or Off On/Off — —
.B[EB@&'&&"@&EJUJPOJOEC







10–6
Index
Key removed from vehicle warning
beep ..................................................... 7-50
Keys ...................................................... 3-2
Key suspend function ...................... 3-8
Transmitter ...................................... 3-4
L
Label Information ................................. 9-2
Lane-Change Signals .......................... 4-73
Lane Departure Warning System
(LDWS) ............................................. 4-107
LDWS switch .............................. 4-110
Lane departure warning system (LDWS)
warning sound ..................................... 7-52
Laser Sensor (Front) ......................... 4-153
Leaving Home Light System .............. 4-68
Liftgate ................................................ 3-21
Light Bulbs
Replacement .................................. 6-50
Specifi cations ................................ 9-12
Lighting Control.................................. 4-62
Lights-on reminder .............................. 7-49
Lubricant Quality .................................. 9-7
Luggage Compartment Light ............ 5-152
M
Maintenance
Information ...................................... 6-2
Scheduled ........................................ 6-3
Maintenance Monitor .......................... 6-15
Manual Transaxle Operation ............... 4-47
Map Lights ........................................ 5-152
Mazda Radar Cruise Control
(MRCC) ............................................ 4-123
Close proximity warning ............. 4-127
Display indication ....................... 4-126
Setting the system ....................... 4-127
Shift-up/shift-down request
display ......................................... 4-132
Mazda Radar Cruise Control (MRCC)
System warnings ................................. 7-53 Message Indicated in Multi-information
Display ................................................ 7-45
Meters and Gauges .............................. 4-24
Mirrors
Outside mirrors.............................. 3-34
Rearview mirror ............................ 3-36
Multi Information Display .................. 4-32
Average fuel economy mode ......... 4-35
Average vehicle speed mode ......... 4-36
Current fuel economy mode .......... 4-36
Distance-to-empty Mode ............... 4-35
LDWS Display .............................. 4-37
Vehicle Speed Alarm ..................... 4-36
Warning (Display Indication) ........ 4-37
O
Odometer and Trip Meter .................... 4-25
Outside Mirrors ................................... 3-34
Outside Temperature Display .............. 4-29
Outside temperature warning beep ..... 7-52
Over Rev. buzzer ................................. 7-53
Overhead Console ............................. 5-159
Overhead Lights ................................ 5-152
Overheating ......................................... 7-26
Owner Maintenance
Closing the Bonnet ........................ 6-20
Engine Compartment Overview .... 6-21
Key battery replacement ............... 6-43
Opening the Bonnet....................... 6-19
Owner Maintenance Precautions... 6-17
P
Parking Brake ...................................... 4-83
Parking Sensor System ..................... 4-175
Park assist sensor system
operation ...................................... 4-178
Sensor detection range ................ 4-177
Personalisation Features ...................... 9-16
Power Steering .................................... 4-99
Power Windows .................................. 3-38
Power steering warning buzzer ........... 7-53
.B[EB@&'&&"@&EJUJPOJOEC