9–17
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method
Vehicle Turn
indicator
Refer to
Turn and
Lane-
Change
Signals on
page 4-50 .
The turn indicator
beep volume level
can be changed.
High High/Low
Refer to
Settings on page 5-55 . —
Three-fl
ash
turn signal
Refer to
Three-Flash
Turn Signal
on page
4-51 . The three-time fl
ash
function can be
changed. On On/Off
Refer to
Settings on page 5-55 . —
System Distance
unit
The distance unit
can be changed.
mi or km mi/km
Refer to
Settings on page 5-55 . —
Language
The display
language can be
changed.*8 English English/
French/
Spanish Refer to Settings on page 5-55 . —
Temperature
unit
The temperature unit
can be changed.
°F or °C °F/°C Refer to
Settings on page 5-55 . —
Fuel
Economy
Monitor
Refer
to Fuel
Economy
Monitor
on page
4-85 . Ending
display
Setting can be
changed so that the
ending display of
the Fuel Economy
Monitor is
displayed.
Off On/Off
Refer
to Fuel
Economy Monitoron page 4-85 . —
Fuel
economy
resetting
procedure Setting can be
changed so that the
fuel economy reset
is linked with the
trip meter reset.
Off On/Off Refer
to Fuel
Economy Monitoron page 4-85 . —
. B [ E B @ % 9 & " ' @ & E J U J P O J O E C . B [ E B @ % 9 & " ' @ & E J U J P O J O E C
9–18
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method
Active
driving
display
Refer to
Active
Driving
Display
on page
4-18 . Turn-by-
Turn (TBT)
Setting can be
changed so that
the Turn-by-Turn
(TBT) of the Active
driving display is
not displayed.
On On/Off
Refer to
Active
driving
display
on page 4-18 . —
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type\
, the warning sound cannot be changed. The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM)\
operation can be changed. The volume of the warning beep during Rear Cross Traffi c Alert (RCTA) operation cannot be changed.
*4 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*5 If the setting is changed to Off, the following operation is performed according to the headlight switc\
h position:
y At position: Headlights turn off immediately after the ignition is switched off. y At any position other than : Headlights do not turn off after the ignition is switched off.
*6 When set to Off, the lights-on reminder is operable.
*7 The setting of the lights-on reminder can be changed with the time setti\
ng of auto headlight off function set to Off. Refer to Lights-On Reminder on page 7-35 .
*8 Available only in display from the center display.
. B [ E B @ % 9 & " ' @ & E J U J P O J O E C . B [ E B @ % 9 & " ' @ & E J U J P O J O E C
