2015 LINCOLN MKS roof

1011
Power-Adjustable Foot Pedals* Move the brake and accelerator pedals by using the control
located on the left side of the steering column.
Press and hold the appropriate side of the control to move the pedals.
Press to move the pedals away from you.
Press to move the pedals closer to you.
Adjust the pedals only when the vehicle is in park (P).
Note: Never use the controls while your vehicle is moving and
with your feet on the accelerator and brake pedals.
Multi-Contour Front Seats with Active Motion* Using the button mounted on the outside of the front seats, or through t\
he
touchscreen, you and a front-seat passenger can adjust the massage and s\
upport
settings. You can also control the intensity of the massage, increase or\
decrease
the lumbar bolster and cushion support, and adjust the height of the bol\
ster.
Dual Automatic Climate Control You and your front passenger can press independent
controls to adjust the air temperature on each side
of the vehicle. To return to one temperature, you
can hold down the AUTO button for more than two
seconds. The passenger setting switches to the
driver's set temperature.
You can also use the Climate display on
the touchscreen.
Ambient Lighting* When you switch on this feature, you light key areas of your vehicle int\
erior with
a choice of colors.
To access and make adjustments:
1. Press the Settings icon > Vehicle > Ambient Lighting.
2. Touch the desired color.
3. Use the scroll bar to increase or decrease the intensity.
To switch the feature on or off, press the power button.
Climate Controlled
Front Seats
To use, press the heated seat symbol or the cooled seat symbol
located on the touchscreen to cycle
through the various settings and
off. Warmer or cooler settings are
indicated by more indicator lights.
The climate controlled seats function
only when the engine is running.
Heated Steering Wheel* Your vehicle may include a heated
steering wheel. Press the icon in
your touchscreen to turn this feature
on and off.
Note: The wood trim does not
heat between the 10 and
2 o’clock positions.
Rear Heated Seats* The rear heated seat controls are
located on the rear of the center
console. To use, press the heated seat
button
to cycle through the various
heat settings and off. Warmer settings
are indicated by more indicator lights.
The rear heated seats function only
when the ignition is on.
Memory Function The memory control, located on the
driver's door, allows the positioning
recall of the driver's seat, power
mirrors, power tilt and telescopic
steering column* and adjustable
pedals*. To program position
1, press
and hold the 1 button until you hear a
tone. Use this same procedure to set
positions
2 and 3 using the respective
buttons. You can recall the set memory
positions by pressing the desired
memory control.

Dual-Panel Moonroof
and Power Sunscreen*
Your moonroof and sunscreen have a
one-touch, open and close feature.
To open the sunscreen, press

and release. To close, pull and
release
.
To open the moonroof, press and
release the SLIDE control. The
sunscreen opens automatically.
To close, pull and release the
SLIDE control.
To vent the moonroof, press and
release the TILT control. To close, pull
and release the TILT control.
To stop motion at any time, press the
control a second time.
Power Sun Shade* The sun shade has a one-touch up
and down feature. The control is in the
overhead console.
Press and release the control

to move the sun shade. To stop
motion, press the control a
second time.
The sun shade automatically
retracts when you shift the
transmission into reverse (R).
Comfort
*if equipped *if equipped
2015 MKS

1415
SecuriCodeTM Keyless Entry System
Allows you to lock or unlock the doors, recall
memory features and arm or disarm the anti-theft
alarm. To get started, you need your five digit factory
code found on your owner’s wallet card (located
in the glove box). Entering this code unlocks the
driver’s door.
To lock all doors, press and hold 7•8 and 9•0 at the
same time.
To unlock all doors, enter the five-digit code, then
press and hold 3•4 within five seconds.
For complete information, refer to the SecuriCode
Keyless Entry Keypad section in the Locks chapter
of your Owner’s Manual. Power Windows: Global Opening and Closing You can use the remote control to operate the
windows with the ignition off.
After you unlock your vehicle, press and hold
the remote control unlock button
to open the
windows and vent the moonroof. Release the unlock
button
once movement starts. Press the lock or
unlock button to stop movement.
To close the windows and moonroof, press and hold
the remote control lock button
. Release the lock
button . once movement starts. Press the lock
or unlock button to stop movement.
Note: You can enable or disable this feature in the
information display. See the Information Display
section in your Owner's Manual.
Note: To operate this feature, accessory delay must
not be active.
Autolamps The headlamps switch on and off automatically in
low light situations or during inclement weather.
To use, place the lighting control switch into the
autolamp position
.
The headlamps remain on for a period of time after
you switch off the ignition. Use the information
display controls to adjust the period of time that the
headlamps remain on. See the Information Displays
chapter in your Owner's Manual for details.
Autowipers If activated, your wipers automatically turn on when
moisture is present on the windshield. The wiper
speed varies based on the amount of moisture
detected and the sensitivity setting. To deactivate,
switch your wiper controls off.
Note: Make sure you switch this feature off before
entering a car wash.
Convenience
Intelligent Access
Note:
Your intelligent access transmitter must be within 3 feet (1 meter) o\
f the
vehicle for intelligent access to function properly.
To unlock and open the driver’s door, pull the front exterior door ha\
ndle. To lock
the doors, press and hold the sensor button on the door handle.
The transmitter also contains a mechanical key blade, which can be used \
to
unlock the driver door, if necessary.
Press
once to lock all doors. Press again within three seconds to confirm all\

doors are locked. You can also use the transmitter to close the windows \
and the
vented the moonroof * by pressing and holding the lock button on the remote
control. Press the lock or unlock button to stop the motion.
Press
once to unlock the driver’s door. Press again within three seconds t\
o
unlock all doors. You can also use the transmitter to open the windows a\
nd vent
the moonroof * by pressing and holding the unlock button. The power sunscreen
also opens.
Press
to activate the panic alarm. Press again or switch on the ignition
to deactivate.
Press
twice within three seconds to open the trunk.
Car finder: Press
twice within three seconds to locate your vehicle. The horn
sounds and the lamps flash.
Remote Start Remote start allows you to start the engine
from outside your vehicle using your
transmitter. To start, press
and then press twice within three seconds. Once inside,
apply the brake while pressing the ENGINE
START STOP button. Shift into drive (D) and
go. To turn the engine off from outside the
vehicle after using your remote start, press
once.
Exterior Trunk Release
When your intelligent access transmitter is within 3 feet (1 meter)
of the vehicle, you can open your trunk by pressing the release button l\
ocated
near the rearview camera.
MyKey® MyKey allows you to program certain driving restrictions in order to pro\
mote
good driving habits. You can program things such as speed restrictions a\
nd
limited volume levels. For complete information, refer to the MyKey chapter in
your Owner’s Manual.
*if equipped
2015 MKS