2015 LINCOLN MKC keyless

54
3 Service Engine Soon Light Lights briefly when the ignition is turned
on. If it remains on or is blinking after the engine
is started, the On-Board Diagnostics (OBD-II)
system has detected a malfunction. Drive in a
moderate fashion (avoid heavy acceleration
and deceleration) and contact your authorized
dealer as soon as possible.
4 Right Vehicle Information Display
Displays information about Entertainment,
Climate, Phone and Navigation*. Use the right,
5-way controls located on your steering wheel
to scroll through, highlight and make minor
adjustments within a selected menu. Refer to
the MyLincoln Touch
TM chapter in your Owner’s
Manual for more information.
5 Steering Wheel Controls
Audio
Press VOL +/– to increase/decrease volume
levels. Press SEEK to access the next/previous
radio station preset, CD track or preset satellite
radio channel*

Voice
Press to answer call.
Press
to exit phone mode or end call.
Press
to access voice recognition.
6 Power Tilt/Telescoping Steering Column*
The 4-way rocker control allows you to adjust
the steering wheel to your desired position.

7 Push Button Start
Allows you to start your vehicle by pressing
the ENGINE START STOP button while fully
pressing down on the brake pedal. If your
vehicle has been idling for an extended period
of time, it will automatically shut down. Before
the engine shuts down, a message appears in
the information display, allowing the driver to
override the shutdown feature. Press the button
again to turn the engine off.
Note: Your intelligent access transmitter must
be inside the vehicle for the ignition to start.
Keyless warning alert sounds the horn twice
when you exit the vehicle with the intelligent
access transmitter and the keyless vehicle is
in RUN, indicating the vehicle is still on.
8 Push Button Shift Transmission
Your vehicle is equipped with an electronic
transmission. The shift buttons are located
on the center stack next to the MyLincoln
Touch system.
Putting Your Vehicle in Gear
1. Fully press down the brake pedal.
2. Press and release one of the PRNDS
buttons to select your gear.
3. The gear shift button you select will light
and the information display will show a
telltale of the selected gear.
4. Release the brake pedal and your
transmission will remain in the
selected gear.
Note: When entering an automatic car wash,
always put your vehicle into Stay in Neutral
mode. To put your vehicle in Stay in Neutral
mode, make sure your vehicle is stationary
first and then:
1. Press the neutral (N) button on the shifter
assembly once. The information display
screen will read “Press N to enter Stay in
Neutral mode”.
2. Press N on the shifter assembly again.
The message “Stay in Neutral mode
engaged” will appear in the information
display and the N button will flash
continuously to confirm your selection.
3. To exit Stay in Neutral mode, press
another gear.
Instrument Panel
1 Adaptive Cruise Control* Automatically adjusts your speed to maintain
a set distance between your vehicle and the
vehicle in front of you in the same lane. You can
set the gap distance between your vehicle and
the vehicle in front of you by pressing the

and
buttons on the steering wheel. Note: Driving aids do not replace the need to
watch where the vehicle is moving and brake
where necessary. Refer to the Cruise Control
chapter of your Owner’s Manual for safety
information, more details and limitations.
2 Left Vehicle Information Display
Provides information about various systems on
your vehicle. Use the left, 5-way controls located
on the steering wheel to choose and confirm
settings and messages. Refer to the Information
Displays chapter in your Owner’s Manual for
more information.
Preproduction model shown
*if equipped
2015 MKC
*if equipped

*if equipped
10*if equipped11
2015 MKCConvenience Lincoln Experiences
As you approach or leave your vehicle, key areas
of your vehicle automatically adjust, including the
following personalization features.
Welcome Lighting
Lights select exterior lighting as you approach your
vehicle. This feature can be turned on and off in your
information display. See the Information Display
chapter in your Owner’s Manual for details.
Auto-folding Exterior Mirrors*
Automatically folds the exterior mirrors toward the
glass when you place the transmission into park (P).
When you place the transmission into drive (D), the
mirrors fold back out automatically. Interior Lighting
Lights select interior lighting and ambient lighting
including the push button start as you enter your
vehicle. Once you start your vehicle, the information
display and the touchscreen also light.
Easy Entry
Automatically recalls your seat and power tilt and
telescoping steering wheel positions when you push
the keyless start ignition button.
Easy Exit
Moves the driver seat rearward up to 2 inches
(5 centimeters). Additionally, the power tilt and
telescoping steering wheel moves to the full up
position when the transmission is in park (P) and
you switch off the keyless start ignition. The driver seat and steering column will return to their
previous positions when you push the keyless
start ignition button.
Note: You must have your intelligent access
transmitter with you for these features to work.
MyLincoln® Mobile App*
This smartphone-compatible app combines

vehicle service, client support and driver
convenience features. For more details, visit
www.support.lincoln.com/owner-services/
mylincoln-mobile-app.com.
Intelligent Access
Note: Your intelligent access
transmitter must be within 3 feet
(1 meter) of the vehicle for intelligent
access to function properly.
To unlock and open the driver’s door,
pull the front exterior door handle.
To lock all of the doors, touch and
briefly hold the sensor button on top of
the door handle.
To open the liftgate, press the button
located in the top of the liftgate pull
cup handle to unlatch the liftgate and
then pull on the outside handle.
Note: The transmitter also contains a
mechanical key blade that can be used
to unlock the driver door, if necessary.
Power Windows: Global
Opening and Closing
You can use the remote
control to operate the windows
with the ignition off.
Open the windows for a short time
after you unlock your vehicle with the
remote control. After you unlock your
vehicle, press and hold the remote
control unlock button to open the
windows. Release the button once
movement starts. Press the lock or
unlock button to stop movement.
To close the windows, press and
hold the remote control lock
button. Release the button once
movement starts. Press the lock or
unlock button to stop movement.
Automatic Climate Control Settings
Use your remote start to start and warm or cool your vehicle. When set to
AUTO, the climate control system automatically adjusts the cabin temperature\

during remote start.
In hot weather, the air conditioning automatically turns on. The cooled seats
also turn on if the cooled seats are set to high (if availablle and set\
to AUTO in
the information display).
In cold weather, the heat automatically turns on. The heated seats and
heated steering wheel are set to high (if available and also set to AUTO in the
information display). Additionally, the heated rear window and mirrors also
turn on automatically.
Autowipers*
If switched on, your wipers will automatically turn on when the system d\
etects
moisture on the windshield. The wiper speed will vary based on the amoun\
t
of moisture detected and the sensitivity setting. To deactivate, switch off your
wiper control. To switch on, use the wiper stalk or the information display. To
adjust the sensitivity setting, use the rotary control on the stalk.
Note: Make sure you switch off this feature before entering a car wash.
Remote Start
Remote start allows you to start the engine from outside your vehicle us\
ing
your transmitter. To start, press and then press twice within three
seconds. Once inside, shift into drive (D) and go. To turn the engine \
off from
outside the vehicle after using your remote start, press
once.
Preproduction model shown