2015 LINCOLN MKC instrument panel

32
Basic Commands
What can I say?

List of commands

Main menu

Previous

Next

Go back

Exit

Help

Pair my phone
Climate
Climate control list
of commands
• Climate
• Climate my temperature
• Climate temperature
Phone
Phone list of commands
• Dial
• Call on cell/
at home/at work
• Call voicemail
• Do not disturb
• Listen to text messages
(phone-dependent feature)

Entertainment
Audio list of commands:
You can also get detailed lists
of commands for radio, USB,
Bluetooth® audio, SiriusXM
and SD card*

Radio
•
• FM <87.9-107.9>
• FM preset <#>

CD
• Play track <1-512>
• Shuffle

USB
• Play song
• Play album

SiriusXM
•
• Preset <#>
Navigation*
Navigation list of commands
• Destination street address

• Destination home
• Navigation voice
• Navigation volume

• Repeat instruction
• Show

54
3 Service Engine Soon Light Lights briefly when the ignition is turned
on. If it remains on or is blinking after the engine
is started, the On-Board Diagnostics (OBD-II)
system has detected a malfunction. Drive in a
moderate fashion (avoid heavy acceleration
and deceleration) and contact your authorized
dealer as soon as possible.
4 Right Vehicle Information Display
Displays information about Entertainment,
Climate, Phone and Navigation*. Use the right,
5-way controls located on your steering wheel
to scroll through, highlight and make minor
adjustments within a selected menu. Refer to
the MyLincoln Touch
TM chapter in your Owner’s
Manual for more information.
5 Steering Wheel Controls
Audio
Press VOL +/– to increase/decrease volume
levels. Press SEEK to access the next/previous
radio station preset, CD track or preset satellite
radio channel*

Voice
Press to answer call.
Press
to exit phone mode or end call.
Press
to access voice recognition.
6 Power Tilt/Telescoping Steering Column*
The 4-way rocker control allows you to adjust
the steering wheel to your desired position.

7 Push Button Start
Allows you to start your vehicle by pressing
the ENGINE START STOP button while fully
pressing down on the brake pedal. If your
vehicle has been idling for an extended period
of time, it will automatically shut down. Before
the engine shuts down, a message appears in
the information display, allowing the driver to
override the shutdown feature. Press the button
again to turn the engine off.
Note: Your intelligent access transmitter must
be inside the vehicle for the ignition to start.
Keyless warning alert sounds the horn twice
when you exit the vehicle with the intelligent
access transmitter and the keyless vehicle is
in RUN, indicating the vehicle is still on.
8 Push Button Shift Transmission
Your vehicle is equipped with an electronic
transmission. The shift buttons are located
on the center stack next to the MyLincoln
Touch system.
Putting Your Vehicle in Gear
1. Fully press down the brake pedal.
2. Press and release one of the PRNDS
buttons to select your gear.
3. The gear shift button you select will light
and the information display will show a
telltale of the selected gear.
4. Release the brake pedal and your
transmission will remain in the
selected gear.
Note: When entering an automatic car wash,
always put your vehicle into Stay in Neutral
mode. To put your vehicle in Stay in Neutral
mode, make sure your vehicle is stationary
first and then:
1. Press the neutral (N) button on the shifter
assembly once. The information display
screen will read “Press N to enter Stay in
Neutral mode”.
2. Press N on the shifter assembly again.
The message “Stay in Neutral mode
engaged” will appear in the information
display and the N button will flash
continuously to confirm your selection.
3. To exit Stay in Neutral mode, press
another gear.
Instrument Panel
1 Adaptive Cruise Control* Automatically adjusts your speed to maintain
a set distance between your vehicle and the
vehicle in front of you in the same lane. You can
set the gap distance between your vehicle and
the vehicle in front of you by pressing the

and
buttons on the steering wheel. Note: Driving aids do not replace the need to
watch where the vehicle is moving and brake
where necessary. Refer to the Cruise Control
chapter of your Owner’s Manual for safety
information, more details and limitations.
2 Left Vehicle Information Display
Provides information about various systems on
your vehicle. Use the left, 5-way controls located
on the steering wheel to choose and confirm
settings and messages. Refer to the Information
Displays chapter in your Owner’s Manual for
more information.
Preproduction model shown
*if equipped
2015 MKC
*if equipped

*if equipped*if equipped13
2015 MKC
12
Liftgate
Manual Liftgate
To Open the Liftgate
1. Unlock the liftgate with the remote control
or power door control. If the intelligent
access transmitter* is within 3 feet (1 meter)
of the liftgate, the liftgate will unlock when
you press the liftgate release button.
2. Unlock all the vehicle doors.
3. Press the button located inside the liftgate
pull-cup handle to unlatch the liftgate.
4. Pull on the outside handle to raise the liftgate.
Power Liftgate*
To Open Using the Outside Liftgate Button
1. Unlock the liftgate with the remote control
or power door control. If the intelligent
access transmitter* is within 3 feet (1 meter)
of the liftgate, the liftgate will unlock when
you press the liftgate release button.
2. Press the button located in the top
of the liftgate pull-cup handle.
3. Allow the power system to open the
liftgate after pressing the control.
4. To close, press and release the
control pictured below. To Open Using the Remote Transmitter
Open or close the liftgate with your remote
control by pressing the
button twice within
three seconds. You will hear a tone when the
liftgate is activated. You can also open or close
the liftgate from inside the vehicle by pressing
the
button on the instrument panel.
Setting the Liftgate Open Height
Once you open the power liftgate, you can move
it manually to a desired height. If the previously
programmed liftgate height is lower than the fully
opened position, you can manually push it upward. To Program a New Height
1. Open the liftgate.
2. Manually move the liftgate to your desired height.
3. Press and hold the control button on the liftgate
until you hear a tone, indicating that your
programming of the liftgate height is successful.
The next time you use the power feature to open the
liftgate, it will open to its newly programmed height.
To change the programmed height, repeat the
process above.
Obstacle Detection*
When you use the power open or close feature and the liftgate detects a \
problem, you will hear a warning tone and the liftgate will stop.
The Liftgate Will Not Power Open or Close When
It detects an object in its opening or closing path.
The 12-volt battery does not have enough charge to power the liftgate.
The ignition is on and the transmission is not in park (P).
You are traveling at speeds at or above 3 mph (5 km/h).
Note: Entering the vehicle while the liftgate is closing could cause the
vehicle to bounce and activate obstacle detection.
Hands-free Liftgate Operation*
1. Make sure you have your intelligent access transmitter within
3 feet (1 meter) of the liftgate.
2. Move your foot under and back from the rear bumper, similar to a kicking
(front-to-back) motion. Do not move your foot sideways or the sensors \
may
not detect the motion.
Note: In vehicles equipped with the towing package, you must kick your
foot between the trailer hitch and the exhaust system. Do not kick under
the hitch.
Built-in Storage
Cargo tie-downs, located in key areas of the rear cargo area, fold out o\
f the way
when not in use.
Umbrella tray, located on the outboard side of the driver seat, lets you\
store a wet
umbrella and keeps it within easy reach.
Toll-ticket holder, located between the headliner and the sunvisor hinge\
: slide
your toll ticket in the space provided.
Liftgate and Built-in Storage
Preproduction model shown Preproduction model shown