Page 107 of 681
1072. Instrument cluster
2
Instrument cluster
NX300h_U_OM78007U ●
Approach warning display (dynamic radar cruise control)
(if equipped) ( P. 2 4 0 , 2 5 3 )●
Pre-collision warning message (pre-collision system)
(if equipped) ( P. 3 1 0 )●
Speed limit display (vehicles with navigation system) ( P. 1 0 9 )■
“HUD” button
Pressing the switch turns the head-
up display on/off and changes the
vehicle speed display units as fol-
lows:
U.S.A.
OFF ON (MPH)
ON (km/h) OFF
Canada
OFF ON (km/h) ON (MPH) OFF■
“DISP” button
Pressing the button changes the dis-
play items (except vehicle speed).
Off
Hybrid System Indicator
TachometerSwitching the head-up display
1
2
3
Page 108 of 681
108 2. Instrument cluster
NX300h_U_OM78007U ■
Adjusting the display position
Higher
Lower
■
Setting the brightness
The brightness of the display is automa tically adjusted in accordance with the
brightness of the surrounding environm ent. However, the brightness can also
be manually adjusted in 9 stages.
Brighter
Darker
Charge area Shows regenerative charging.
Hybrid Eco area Shows that gasoline engine power is not
being used very often.
The gasoline engine will automatically
stop and restart under various condi-
tions.
Eco area Shows that the vehicle is being dr iven in an Eco-friendly manner.
Po w e r a r e a Shows that an Eco-friendly driving range is being exceeded (during full power driving,
etc.)Making the display easier to see 1
2
1
2
Hybrid System Indicator 1
2
3
4
Page 109 of 681

1092. Instrument cluster
2
Instrument cluster
NX300h_U_OM78007U When the vehicle approaches an inter-
section, the direction the vehicle should
go is guided by the arrow. When the
vehicle approaches an intersection, the
route guidance will start and the dis-
tance
* to the intersection will also be
displayed.
* : The distance indication will disappear
when the vehicle passes through the
intersection.
Displays the speed limit for the current
road.
The audio display and speed limit display can be shown or hidden. When customizing vehicle features, ensure that the vehicle is parked in a safe
place with the shift lever in P and the parking brake set.
Until the screen changes, continue
pressing the “DISP” button, and it
will repeat until the item desired to
be changed is displayed. Customization can be performed when
the head-up display is on.
Press the “DISP” button to switch
between on and off. On and off will be switched between each time the button is pressed.
If the button is left alone without being operated for a short time, setting will be fin-
ished automatically.Route guidance display (v ehicles with navigation system)
Speed limit display (vehicles with navigation system)
Display customization 1
2
Page 110 of 681

110 2. Instrument cluster
NX300h_U_OM78007U ■
Head-up display ●
The head-up display may seem dark and hard to see when viewed through sunglasses,
especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.●
When the head-up display is turned off, it will not display an ything until it is turned on
again. ■
When the 12-volt battery is disconnected
The customize settings of the head-up display will be reset.
WA R N I N G ■
Before using the head-up display
Check that the position and brightness of the head-up display image does not interfere
with safe driving. Incorrect adjustment of the image’s position or brightnessmay
obstruct the driver’s view and lead to an a ccident, resulting in death or serious injury.
NOTICE ■
To prevent damage to components ●
Do not place any drinks near the head-up dis-
play projector. If the projector gets wet, elec-
trical malfunctions may result. ●
Do not place anything on or put stickers onto
the head-up display projector.
Doing so could interrupt head-up display
indications. ●
Do not touch the inside of the head-up display
projector or thrust sharp edges or the like into
the projector.
Doing so could cause mechanical malfunc-
tions.
Page 111 of 681
1112. Instrument cluster
2
Instrument cluster
NX300h_U_OM78007UEnergy monitor/consumption screen You can view the status of your hybrid system on the multi-information display
and the navigation system (if equippe d)/Lexus Display Audio system (if
equipped).
Multi-information display
Navigation system screen/Lexus
Display Audio screen (if equipped)
“DISP” switch/Meter control
switches
Vehicles with a navigation system
“MENU” button
To u c h p a d
*
Vehicles with a Lexus Display Audio
system
“MENU” button
Lexus Display Audio controller
( P. 3 3 8 )
* : For use of the Remote Touch, refer to
“NAVIGATION SYSTEM OWNER’S
MANUAL”. 1
2
3
4
5
6
7
Page 112 of 681
112 2. Instrument cluster
NX300h_U_OM78007U
Navigation system screen
Press the “MENU” button on the
Remote Touch, then select “Info” on the
“Menu” screen, and then select “Fuel
Consumption”. If the “Trip Information” or “Past Record”
screen is displayed, select “Energy”.
Lexus Display Audio screen
Press the “MENU” button on the Lexus
Display Audio controller, then select
“Info” on the “Menu” screen, and then
select “Fuel Consumption”. If the “Energy Monitor” screen does not
appear, move the controller to the right
and select “Energy”.
Multi-information display
Press or of the meter control switches and select , and then or
to select the energy monitor display.Energy monitor
Navigation system screen or
Lexus Display Audio screen Multi-information display
When the vehicle is
powered by the elec-
tric motor (traction
motor)
When the vehicle is
powered by both the
gasoline engine and
the electric motor
(traction motor)
Page 113 of 681
1132. Instrument cluster
2
Instrument cluster
NX300h_U_OM78007U These images are examples only, and may vary slightly from actual conditions. When the vehicle is
powered by the gaso-
line engine
When the vehicle is
charging the hybrid
battery (traction bat-
tery)
When there is no
energy flow
Hybrid battery (trac-
tion battery) status Low Full Low FullNavigation system screen or
Lexus Display Audio screen Multi-information display
Page 114 of 681
114 2. Instrument cluster
NX300h_U_OM78007U ■
Trip information
Navigation system screen
Press the “MENU” button on the Remote Touch, then select “Info” on the
“Menu” screen, and then select “Fuel Consumption”. If the “Energy Monitor” or “Past Record” screen is displayed, select “Trip Informa-
tion”.
Resetting the consumption data
Fuel consumption in the past 15
minutes
Current fuel consumption
Regenerated energy in the past
15 minutes
One symbol indicates 50 Wh.
Up to 5 symbols are shown.
Average vehicle speed since the hybrid system was started.
Elapsed time since the hybrid system was started.
Cruising range ( P. 1 1 6 )Fuel consumption (vehicles with a navigation system or Lexus Display
Audio system) 1
2
3
4
5
6
7