2015 LEXUS NX300h display

3134-5. Using the driving support systems
4
Driving
NX300h_U_OM78007U ■
Situations in which the pre-collision system does not function properly
The system may not function effectively in situations such as the following:●
On roads with sharp bends or uneven surfaces ●
If a vehicle suddenly moves in front of your vehicle, such as at an intersection ●
If a vehicle suddenly cuts in front of your vehicle, such as when overtaking ●
In inclement weather such as heav y rain, fog, snow or sand storms●
When your vehicle is skidding with the VSC system off ●
When an extreme change in vehicle height occurs ●
When the radar sensor moves off position du e to its surrounding area being subjected
to a strong impact ●
Due to greatly turning the wheel when an obstacle suddenly appears ahead ■
Automatic cancelation of the pre-collision system
When a malfunction occurs due to sensor contamination, etc., that results in the sensors
being unable to detect obstacles, the pre-collision syst em will be automatically disabled.
In this case, the system will not activate even if there is a collision possibility.■
When there is a malfunction in the system, or if the system is temporarily unavailable
The PCS warning light flashes and a warning message is shown on the multi-information
display. If a warning message is shown on th e multi-information display, read the message
and follow the instructions. ■
When the TRAC and VSC are turned off ●
When the TRAC and VSC operations are turned off (  P. 307), the pre-collision brake
assist and pre-collision braking are also turned off. However, the alert function oper-
ates. ●
The PCS warning light turns on and the “V SC Turned Off Pre-Collision Brake System
Unavailable” is shown on the multi-information display. ■
Certification 
For vehicles sold in the U.S.A.
FCC ID: HYQDNMWR007
This device complies with part 15 of the FC C Rules. Operation is subject to the following
two conditions: (1) This device may not caus e harmful interference, and (2) this device
must accept any interference received, incl uding interference that may cause undesired
operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment.
Radio frequency radiation exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance of 20 cm
between the radiator (antenna) and your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. 
For vehicles sold in Canada
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two co nditions: (1) this device may not cause inter-
ference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.

3174-5. Using the driving support systems
4
Driving
NX300h_U_OM78007U ■
The BSM outside rear view mirror indicators visibility
When under strong sunlight, the BSM outside rear view mirror indicator may be difficult
to see. ■
Rear Cross Traffic Alert buzzer hearing
Rear Cross Traffic Alert function may be difficult to hear over loud noises such as high
audio volume. ■
When “Blind Spot Monitor Unavailable” is shown on the multi-information display
Water, snow mud, etc., may be built up in the vicinity of the sensor area of bumper.
(  P. 318) Removing the water, snow, mud, etc., from the vicinity of the sensor area
bumper should return it to normal. Also, the sensor may not function normally when used
in extremely hot or cold weather. ■
When “Blind Spot Monitor System Malfunct ion” is shown on the multi-information
display
There may be a sensor malfunction or voltag e abnormality. Have the vehicle inspected at
a Lexus dealer. ■
Certification for the Blind Spot Monitor system 
For vehicles sold in the U.S.A.
FCC ID: OAYSRR2A
This device complies with part 15 of the FC C Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment. 
For vehicles sold in Canada
Applicable law: Canada 310
This device complies with Industry Canada licence-exempt RSS st andard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Frequency bands: 24.05-24.25 GHz
Output power: less than 20 milliwatts

334
NX300h_U_OM78007U 5-1. Basic Operations
Lexus Display Audio
System ......................................... 336
Steering wheel audio
switches ...................................... 342
Mobile Assistant ........................343
USB/AUX ports ........................ 345
5-2. Setup
Setup menu.................................. 347
General settings ........................348
Voice settings............................... 351
Display settings .......................... 352
5-3. Using the audio system
Selecting the audio
source .......................................... 353
Optimal use of the audio
system ......................................... 354
Audio settings ............................. 355
Audio menu screen
operation ...................................358
5-4. Using the radio
Radio operation ............................361
5-5. Playing an audio CD and
MP3/WMA/AAC discs
CD player operation ................ 367

335
Lexus Display
Audio system
5
NX300h_U_OM78007U 5-6. Using an external device
Listening to an iPod ....................374
Using USB memory
device .......................................... 377
Using the AUX port .................. 381
5-7. Connecting Bluetooth ®

Steps for using Bluetooth ®

devices ........................................ 382
Registering a Bluetooth ®

device ......................................... 384
Selecting a Bluetooth ®

device ......................................... 385
Connecting a Bluetooth ®

audio player ............................. 386
Connecting a Bluetooth ®

phone...........................................387
Displaying a Bluetooth ®

device details........................... 388
Detailed Bluetooth ®

settings ....................................... 389
5-8. Bluetooth ®
Audio
Listening to Bluetooth ®

Audio........................................... 390 5-9. Bluetooth ®
Phone
Using a Bluetooth ®

Phone ........................................... 392
Making a call ............................... 394
Receiving a call .......................... 397
Speaking on the phone ...........398
Using a Bluetooth ®

phone message ...................... 400
Using the steering wheel
switches ...................................... 402
Bluetooth ®
phone
settings........................................ 403
5-10. Phonebook
Contact settings .........................405
Messaging setting .................... 408
5-11. Bluetooth ®
What to do if...
(Troubleshooting)....................409
Bluetooth ®
................................... 413
5-12. Other function
“Information” screen .................. 418
USB photo ................................... 420
Weather information................ 422
Voice command system ......... 423
LEXUS Enform Remote..........427

336 5-1. Basic Operations
NX300h_U_OM78007ULexus Display Audio system 
Disc slot
“TUNE•SCROLL” knob
Select a radio station band, track or file.
Except radio and A/V mode: Pause or resume playing a track or file.
Radio and A/V mode: Turn mute on/off.
Select preset radio stations, or access a desired track or file.
Display the media top screen.
Display the radio top screen.
Eject a disc.
“PWR•VOL” knob
Press to turn the audio system on/o ff, and turn to adjust the volume.
 : If equippedUse the following buttons to start listening to the audio system.
Lexus Display Audio operation buttons
1
2
3
4
5
6
7
8

3375-1. Basic Operations
5
Lexus Display Audio system
NX300h_U_OM78007U ■
“Menu” screen
To display the “Menu” screen, press the “MENU” button on the controller unit.
Button Function
“Radio” Display the radio top screen (  P. 3 6 1 )
“Media” Display the media top screen (  P. 367, 374, 377, 381, 386)
“Climate” Automatic air conditioning system (  P. 4 3 0 )
“Phone” Display the phone top screen (  P. 3 9 2 )
“Info” Display the “Information” screen (  P. 4 1 8 )
“Setup” Setup menu (  P. 3 4 7 )
“Display” Display settings (  P. 3 5 2 )

338 5-1. Basic Operations
NX300h_U_OM78007U By using the Lexus Display Audio controller, you can control the audio system,
hands-free system, etc.
Display the “Source” screen or
audio top screen (  P. 3 5 3 )
Display the “Menu” screen
(  P. 3 3 7 )
Back button
Display the previous screen
Turn or move the controller to select
a function and number.
Move the controller to display the left or right side of the screen.
Push the controller to enter the selected function and number.■
Using the Lexus Display Audio controller
Select: Turn or move the control-
ler.
Enter: Push the controller.Lexus Display Audio controller 1
2
3
4
1
2

3395-1. Basic Operations
5
Lexus Display Audio system
NX300h_U_OM78007U ■
Basic screen operation
When a list is displayed, use the appropriate button to scroll through the list.
Indicator turns on when you can
select the list by turning the con-
troller.
Indicator turns on when you can
return to the previous screen by
pressing the back button.
Indicator turns on when you can
move the controller left to view
additional screen text.
Indicator turns on when you can move the controller right to view addi-
tional screen text. 1
2
3
4