2015 LEXUS LX570 display

8014-3. Do-it-yourself maintenance
4
Maintenance and care
LX570_OM_OM60L96U_(U) Fuse Ampere Circuit
11 SEAT-A/C FAN 10 A Ventilators
12 SEAT-HTR 20 A Seat heaters
13 AFS 5 A Adaptive Front-lighting System
14 ECU-IG No.3 5 A Adaptive Front-lighting System,
dynamic radar cruise control system
15 STRG HTR 10 A Heated steering wheel
16 TV 10 A Multi-display assembly■
After a fuse is replaced ●
If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (  P. 803)●
If the replaced fuse blows again, have the vehicle inspected by your Lexus
dealer.■
If there is an overload in the circuits
The fuses are designed to blow, protec ting the wiring harness from damage.

When trouble arises
5
815
LX570_OM_OM60L96U_(U) 5-1. Essential information
Emergency flashers ............... 816
If your vehicle needs to be
towed ....................................... 817
If you think something is
wrong ..................................... 824
Fuel pump shut off
system .................................... 825 5-2. Steps to take in an
emergency
If a warning light turns on
or a warning buzzer
sounds... ................................. 826
If a warning message is
displayed................................ 837
If you have a flat tire .............. 854
If the engine will not
start ......................................... 868
If the shift lever cannot be
shifted from “P”.................... 870
If you lose your keys ............... 871
If the electronic key does
not operate properly ......... 872
If the battery is
discharged ............................ 875
If your vehicle overheats ..... 878
If the vehicle becomes
stuck......................................... 881
If your vehicle has to be
stopped in an
emergency............................ 883

8385-2. Steps to take in an emergency
LX570_OM_OM60L96U_(U) If a warning message is displayed The multi-information display shows warnings of system malfunctions,
incorrectly performed operations, or shows messages that indicate a need
for maintenance.
If a warning is shown on the instrumen t cluster, stay calm and perform the
following actions:
Master warning light The master warning light also
comes on or flashes in order to
indicate that a message is cur-
rently being displayed on the
multi-information display.
Multi-information display
If any of the warning lights comes on again after the following actions
have been performed, contact your Lexus dealer.

8505-2. Steps to take in an emergency
LX570_OM_OM60L96U_(U) Interior
buzzer Exterior
buzzerWarning message Details Correction
procedure
Con-
tinuous 
(Flashes) The driver’s door
was opened when
the shift lever was
not in “P” and the
“ENGINE START
STOP” switch was
not turned off. Shift the shift lever
to “P”.
Con-
tinuous Con-
tinuous
(Displayed alternately)
(Flashes) The driver’s door
was opened and
closed while the
electronic key
was not in the
vehicle, the shift
lever was not in
“P” and the
“ENGINE START
STOP” switch was
not turned off. •Shift the shift
lever to “P”.
• Bring the elec-
tronic key back
into the vehicle.

5
When trouble arises
8535-2. Steps to take in an emergency
LX570_OM_OM60L96U_(U) Other messages
If the following message is displayed, take appropriate action and con-
firm that the message has disappeared. (  P. 337)Message Correction procedure
Select the four-wheel drive control switch in L4 and
shift the shift lever to “D” or “R”.
Confirm the operating conditions.
Confirm the operating conditions to operate Turn
Assist function.
Turn on the Crawl Control switch to operate Turn
Assist function.

8545-2. Steps to take in an emergency
LX570_OM_OM60L96U_(U) ■
Resetting the tire pressure warning data
After adjusting the tire inflation pressure, be sure to initialize the data. (  P. 768)
If the message remains on, the system may have malfunctioned. Have the vehicle
inspected by your Lexus dealer as soon as possible. ■
Warning message in vehicle-to-vehicle distance control mode of the dynamic
radar cruise cont rol (if equipped)
In the following cases, the warning message may not be displayed even if vehicle-
to-vehicle distance decreases: ●
When your vehicle and the vehicle ahead are traveling at the same speed or the
vehicle ahead is traveling more quickly than your vehicle ●
When the vehicle ahead is traveling at a very low speed ●
Immediately after cruise control speed is set ●
At the instant the accelerator pedal is depressed
NOTICE■
While the engine oil level warning is displayed
Continued engine operation with low engine oil will damage the engine.

9196-2. Customization
6
Vehicle specifications
LX570_OM_OM60L96U_(U) Illumination
(  P. 686) Outer foot lights On Off — — O
Sensitivity of the
ambient light sen-
sor used for dim-
ming the meter
lights etc. Standard -2 to 2 — — O
Sensitivity of the
ambient light sen-
sor used for bright-
ening the meter
lights etc. Standard -2 to 2 — — O
Intuitive
parking assist
(  P. 251) Detection distance
of the rear center
sensor Far Near O — O
Alert Volume
(alert volume can
be adjusted) 3 1 to 5 O — O
Display setting
(when intuitive
parking assist is
operating) All sensors
displayed Display off O — O
Automatic air
conditioning
system
(  P. 444) Exhaust gas sensor
sensitivity Standard -3 to 3 O — O
A/C Auto switch
operation Auto Manual O — O
Front seats
(  P. 67) Power easy access
system Partial Off
O — O
FullItem Function Default
setting Customized
setting

9216-2. Customization
6
Vehicle specifications
LX570_OM_OM60L96U_(U) ■
Vehicle customization ●
If the smart access system with push-bu tton start is turned “OFF”, unlock door
cannot be selected. ●
If the doors are not opened after unlo cking and are then automatically re-
locked, a signal will be given if “Ope ration signal (Emergency flashers)” or
“Operation signal (Bu zzer)” are set to ON.■
When setting using the vehicle switches
When using the vehicle switches to set an item that can also be set using the touch
screen, the item displayed on the touc h screen will not change immediately.
If the “ENGINE START STOP” switch is first turned to OFF, the screen display will
change once the “ENGINE START STOP” switch is turned to IGNITION ON
mode again. ■
When customizing using the touch screen
Stop the vehicle in a safe place, apply the parking brake, and shift the shift lever to
“P”. Also, to prevent battery discharge, leave the engine running while customizing
the features.