Page 3 of 82

3
Navigation System*Register home .................................................................................................................. .............. 33
Destination input Search by address ........................................................................ 34
Destination input Search points of interest by name ......................................... 36
Destination input Search points of interest by ca tegory ...................................37
Destination input Search points of interest by telephone number .............. 38
Voice Command System........................................................................................................... 62
Portable Audio Device Ports ....................................................................................................... 68
Remote Touch ............................................................................................................................... ....... 30
Seat Heaters/Seat Ventilators ..................................................................................................... 61
Tire Pressure Warning System .................................................................................................... 29
Turn Signal Lever ................................................................................................................................... 11
Voice Command System *
Basic operation ................................................................................................................ .............. 62
Command list................................................................................................................... ............... 63
Windshield Wipers and Washer ................................................................................................... 17
XM Satellite Radio .............................................................................................................................74
*: This feature may be operated by Voice command (See P.62)
Page 4 of 82
4
Floor Mat Installation
Insert the retaining hooks (clips) into
the floor mat eyelets.
Turn the upper knob of each retaining
hook (clip) to secure the floor mats in
place.
*: Always align the marks.
The shape of the retaining hooks (clips) may di ffer from that shown in the illustration.
Use only floor mats designed specifically for vehicles of the same model and model year
as your vehicle. Fix them secu rely in place onto the carpet.
11
*
22
Page 5 of 82
5
OverviewInstrument Panel
Windshield wiper and washer switch P.17
Multi-information display P.12
Turn signal lever
Headlight switch
Fog light switch
*
P.11
P.14
Inside lock buttons*
PCS OFF switch*
Driving position memory switches
*
See P.8
See P.7
Window lock switch
*
Outside rear view mirror switches
*
Power window switches*
Door lock switches*
Tire pressure warning reset switch P.29
Page 11 of 82
11
Tu r n S i g n a l L e v e r
Right turn
Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3 times.
Lane change to the left (move the lever
partway and release it)
The left hand signals will flash 3 times.
Left turn
■ If the turn signals do not stop flashing after turning left or right, or if you
want to stop them flashing
Operate the lever in the opposite direction to either position or . If you move the
lever to either position or , the selected turn signals will flash.
The lever will return to its original position after operation.
1
2
3
4
■ Customization
The number of times the turn signals flas h during a lane change can be changed.
23
14
Page 13 of 82
13
■Operating the meter control switches
The multi-information display is operated
using the meter control switches.
Select an item/change pages
Enter/Set
Except F SPORT models Press: Displays the screen registered
to
When no screen has been registered,
the drive information screen will be dis-
played.
Press and hold: Registers the currently
displayed screen to
When the confirmation screen is dis-
played, select yes to register the
screen. If the sele cted screen cannot
be registered, a registration failure
message will be shown.
F SPORT models
Move the main meter
Return to the previous screen
1
2
3
3
4
■ If a problem is detected in any of the vehi cle’s systems, a warning message is shown on
the multi-information display.
■ Move the main meter (F SPORT models)
Moves between center and right-side positions.
Page 14 of 82
14
Headlights
The side marker, parking, tail,
license plate and instrument
panel lights turn on.
The headlights and all lights
listed above turn on.
The headlights, daytime run-
ning lights and all the lights
listed above turn on and off
automatically. (When the
engine switch is in IGNITION
ON mode.)
Off
The daytime running lights turn
on.
■Turning on the high beam headlights
With the headlights on, push the lever
away from you to turn on the high
beams.
Pull the lever toward you to the center
position to turn the high beams off.
Pull the lever toward you and release it
to flash the high beams once.
You can flash the high beams with the
headlights on or off.
(Canada)
(U.S.A.)
1
2
3
4
(U.S.A.)
(Canada)
1
2
Page 15 of 82
15
Automatic High Beam (if equipped)
■Activating the Automatic High Beam system
Push the lever away from you with the
headlight switch in the or
position.
Press the Automatic High Beam
switch.
The Automatic High Beam indicator
will come on when the headlights are
turned on automatically to indicate that
the system is active.
The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of
streetlights, the lights of oncoming and prec eding vehicles, etc., and automatically turns
the high beam on or off as necessary.
1
2
Page 16 of 82
16
■Turning the high beam on/off manually
● Switching to low beam
Pull the lever to the original position.The Automatic High Beam indicator will
turn off.
Push the lever away from you to activate
the Automatic High Beam system again.
● Switching to high beam
Press the Automatic High Beam switch.The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Press the switch to activate the Auto-
matic High Beam system again.