Page 5 of 102
5
GS450h_QG_OM30E61U_(U)
OverviewInstrument Panel
Windshield wiper and washer switch P.33
Multi-information display P.28
Headlight switch Turn signal lever
Fog light switch
*
P.31
P.25
Inside lock buttons*
Trunk opener*
Hood lock release lever*
Driving position memoryswitches
P.19
See P.8
See P.7
Window lock switch*
Outside rear view mirror switches
*
Power window switches*
Door lock switches*
PCS OFF switch*
Tire pressure warning reset switch P.53
AFS OFF switch P.32
Page 19 of 102
19
GS450h_QG_OM30E61U_(U)
Driving Position Memory
■Driving position memory
■
Recording procedure
Check that the shift lever is in P.
Turn the power switch to ON mode.
Adjust the driver’s seat, steering wheel, and outside rear view mirrors to the desired
positions. While pressing the “SET” button, or within 3
seconds after the “SET” button is pressed,
press button “1”, “2” or “3” until the buzzer
sounds.If the selected button has already been
preset, the previously recorded position
will be overwritten.
■Recall procedure
Check that the shift lever is in P.
Turn the power switch to ON mode.
Press one of the buttons for the driving
position you want to recall until the buzzer
sounds.
This feature automatically adjusts the front seats, steering wheel and outside rear view
mirrors to suit your preferences.
1
2
3
4
1
2
3
Page 47 of 102

47
GS450h_QG_OM30E61U_(U)
BSM (Blind Spot Monitor) (if equipped)
The Blind Spot Monitor is a system that has 2 functions;
● The Blind Spot Monitor function
Assists the driver in making the decision when changing lanes
● The Rear Cross Traffic Alert function
Assists the driver when backing up
These functions use same sensors.
BSM main switch
Pressing the switch turns the system on or of f. When the switch is set to on, the switch’s
indicator illuminates and the buzzer sounds . Common switch for Blind Spot Monitor
function and Rear Cross Traffic Alert function.
Outside rear view mirror indicators
Blind Spot Monitor function:
When a vehicle is detected in the blind sp ot, the outside rear view mirror indicator
comes on while the turn signal lever is no t operated and the outside rear view mirror
indicator flashes while the turn signal lever is operated.
Rear Cross Traffic Alert function:
When a vehicle approaching from the right or left rear of the vehicle is detected, the
outside rear view mirror indicators flash.
Rear Cross Traffic Alert buzzer (Rear Cross Traffic Alert function only)
When a vehicle approaching from the right or left rear of the vehicle is detected, a
buzzer sounds from behind the rear seat.
1
2
3
Page 99 of 102
What to do if...
99
GS450h_QG_OM30E61U_(U)
*: Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”
See the OWNER’S MANUAL
Turn signal indicatorIntuitive parking assist
indicator (if equipped)
*
Headlight indicator (U.S.A.)“A F S O F F ” i n d i c a t o r
(if equipped)
Tail light indicator (Canada)
(Flashes)
Slip indicator
Headlight high beam indicatorVSC OFF indicator
Front fog light indicator
(if equipped)
(Flashes faster)
“PCS” warning light
(if equipped)
“READY” indicatorParking brake indicator
(U.S.A.)
EV indicatorParking brake indicator
(Canada)
Cruise control indicatorBrake hold standby indicator
Radar cruise control
indicator (if equipped)Brake hold operated indicator
Cruise control “SET” indicator
BSM (Blind Spot Monitor)
outside rear view mirror
indicators (if equipped)
LKA (Lane-Keeping assist)
indicator (if equipped) “A I R B A G O N /
OFF” indicator
For further information, refer to the OWNER’S MANUAL.