781
Maintenance
EMISSION CONTROL SYSTEMThe emission control system of your
vehicle is covered by a written limited
warranty. Please see the warranty
information contained in the
Warranty & Maintenance booklet in
your vehicle.
Your vehicle is equipped with an
emission control system to meet all
applicable emission regulations.
There are three emission control
systems, as follows.
(1) Crankcase emission control sys-tem
(2) Evaporative emission control sys- tem
(3) Exhaust emission control system
In order to assure the proper function
of the emission control systems, it is
recommended that you have your
vehicle inspected and maintained by
an authorized Kia dealer in accor-
dance with the maintenance sched-
ule in this manual. Caution for the Inspection and
Maintenance Test (With Electronic
Stability Control (ESC) system)
To prevent the vehicle from mis-
firing during dynamometer test-
ing, turn the Electronic Stability
Control (ESC) system off by
pressing the ESC switch.
After dynamometer testing is completed, turn the ESC system
back on by pressing the ESC
switch again.
1. Crankcase emission control systemThe positive crankcase ventilation
system is employed to prevent air
pollution caused by blow-by gases
being emitted from the crankcase.
This system supplies fresh filtered air
to the crankcase through the air
intake hose. Inside the crankcase,
the fresh air mixes with blow-by
gases, which then pass through the
PCV valve into the induction system.2. Evaporative emission con-trol (including ORVR:
Onboard Refueling Vapor
Recovery)
systemThe Evaporative Emission Control
System is designed to prevent fuel
vapors from escaping into the atmos-
phere.
(The ORVR system is designed to
allow the vapors from the fuel tank to
be loaded into a canister while refu-
eling at the gas station, preventing
the escape of fuel vapors into the
atmosphere.)
XM(FL) CAN(ENG) 7.QXP 1/23/2013 3:38 PM Page 81
Specifications & Consumer information68RECOMMENDED LUBRICANTS AND CAPACITIES To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
LubricantVolume Classification
Engine oil *
1*2
(drain and refill) 2.4 Engine
5.0
l(5.28 US qt.)
API Service SM*
3,
ILSAC GF-4 or above
3.3 Engine 5.7
l(6.02 US qt.)
Manual transaxle fluid 2.4 Engine 1.8
l(1.90 US qt.)
API GL-4, SAE 75W/85
Automatic transaxle fluid 2.4 Engine
7.1
l (7.50 US qt.) MICHANG ATF SP-IV, SK ATF SP-IV, NOCA
ATF SP-IV Kia genuine ATF & SP-IV or other brands meeting the above specification approved by Kia motors corp.
3.3 Engine
7.8
l(8.24 US qt.)
Coolant 2.4 Engine
AT
7.4
l (7.8 US qt.)
Mixture of antifreeze and distilled water(Ethylene glycol base coolant for aluminum radiator)
MT
7.1 l(7.5 US qt.)
3.3 Engine AT Without Trailer
Packege: 8.7
l
(9.2 US qt.)
With Trailer
Packege : 9.1 l
(9.6 US qt.)
XM(FL) CAN(ENG) 8.QXP 1/23/2013 4:01 PM Page 6
