2015 KIA OPTIMA HYBRID instrument cluster

10
Active ECO System Video
To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
QR CODE
www.KuTechVideos.com/tf23/2015
Active ECO System*
The Active ECO system helps improve fuel economy by controlling several vehicle components . When
activated, it optimizes drivetrain operations such as engine power and transmission to help improve
fuel economy .
To turn ON, press the ECO button A . The button light will turn on, and the green ECO indicator light B in the instrument cluster will illuminate (indicating that you are getting optimal fuel efficiency) . The
Active ECO system will remain on even when the ignition is cycled .
To turn the Active ECO system OFF, press ECO button A again .
VOL
VOL
MUTE
MODE CRUISE
RES
SET
CANCEL
OK
ECO
VOL
VOL
MUTE
MODE
For more information on Active ECO, refer to your Owner’s Manual or contact your local dealership.
1
0 2
3
4
5
6rpm
x 100 0ODO000 45 6m iles
D
10
23
4
5
6
rpm
x 100 0ODO000 45 6m iles
Active
ON1
0 2
3
4
5
6rpm
x 100 0ODO000 45 6m iles
Active
ON1
0 2
3
4
5
6rpm
x 100 0ODO000 45 6m iles
Active
ON
(Located on Steering Wheel)(Located in Instrument Cluster)
To help improve your fuel economy: •Drive at a moderate speed, accelerating smoothly and at a moderate rate •Keep tires inflated to the recommended pressure •Be sure the wheels are properly aligned
QUICK TIPS
AB
OPTIMA HYBRID FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
INSTRUMENT CLUSTER

11
Instrument Cluster - Energy Flow
Optima Hybrid’s instrument cluster displays the following hybrid system modes to inform the driver of its status .
EV Propulsion - The electric motor is moving
the vehicle .
Power Assist - Both the electric motor AND the
engine are moving the vehicle .
Engine-Only Propulsion - The engine is moving
your vehicle .
Engine Generation - While the vehicle is stopped,
the engine is charging the hybrid battery .
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
HYBRID SYSTEM DISPLAY

12
Instrument Cluster - Energy Flow
Optima Hybrid’s instrument cluster LCD screen displays the following hybrid system modes to inform the driver of
its status . To change modes, go to User Settings in the LCD Instrument Cluster modes .
Optima Hybrid Cluster Overview Video
To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
QR CODE
www.KuTechVideos.com/tf23/2015
Power Reserve - While the engine powers the
vehicle, it is also recharging the hybrid battery .
Vehicle Stop - The vehicle’s hybrid system is
standing by .
Engine Brake/Regeneration - The regenerative
braking system is recharging the hybrid battery .
Engine Generation/Regeneration - The engine and
the regenerative braking system are both recharging
the hybrid battery .
OPTIMA HYBRID FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
HYBRID SYSTEM DISPLAY

13
Instrument Cluster - ECO Level
ECO Level - The more economically you drive,
the more the ECO Level increases .
Range - Estimates how far you can go before
refueling is required .
Average Fuel Consumption - Calculates average*
fuel consumption from the distance driven and amount
of fuel injected into the engine / total fuel used .
Optima Hybrid’s instrument cluster LCD screen displays the following hybrid system modes to inform the driver of its status . To change
modes, go to User Settings in the LCD Instrument Cluster modes .
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
HYBRID SYSTEM DISPLAY

14
Navigation System Display*
When equipped, Optima Hybrid’s Navigation screen also provides information on economical operation and hybrid
system modes, including ECODynamics . To enter the Hybrid display mode, press the Settings key on the audio control
unit . Press the on-screen INFO/UVO icon, then press HYBRID .
Energy Flow - Displays the current flow of power
between the Optima Hybrid’s main powertrain
components . It’s similar to the Energy Flow Screen in
the LCD in the instrument cluster .
Car Mode - The more economically you drive, the more
the ECO Level bars fill up . As you continue to maintain
high fuel efficiency, leaves will appear and begin to fly off
the vehicle .
Average Fuel Economy - Displays the average fuel
economy over the duration of a trip .
PM
ECO Level
PM
50
40
30
20
10
MPG NOW 30 min
10 min 20 minAverage
Fuel Econom y13.4 MPGElectric
Gasoline
Average
Fuel Economy
PM
Earth Mode - The more economically you drive, the
more the ECO Level bars fill up, and the earth becomes
more blue . As you continue to maintain high fuel
efficiency, the earth will start growing leaves .
PM
Optima Hybrid Navigation System ECODynamics Display Video
To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
QR CODE
www.KuTechVideos.com/tf23/2015
OPTIMA HYBRID FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
HYBRID SYSTEM DISPLAY

16
AUTO HOLD temporarily maintains the
vehicle at a standstill even if the brake pedal
is released . AUTO HOLD can be turned ON/
OFF using the AUTO HOLD switch B on
the driver’s panel . Before AUTO HOLD will
operate, the driver’s door, engine hood and
trunk must be closed, and the driver’s seat
belt must be fastened .
The AUTO HOLD indicator has four states:
White: Standby - With vehicle at a standstill,
and AUTO HOLD switch B turned ON, the
indicator will illuminate white . While driving
the vehicle (vehicle is not at a standstill), the
AUTO HOLD indicator will remain white .
Yellow: Malfunction - When the indicator
is illuminated yellow, there may be a system
malfunction . Take your vehicle to a local Kia dealer .
Green: Engaged - When coming to a complete stop by depressing the brake
pedal, the AUTO HOLD indicator changes from white to green .
OFF (not illuminated) - The indicator will turn OFF when the AUTO HOLD
switch B is manually turned OFF or when the EPB is manually turned ON .
REMINDERS:
• As a bulb check, the EPB malfunction indicator will illuminate for approximately 3 seconds when the ignition switch is turned ON
• If the warning light does not illuminate temporarily, or continues to remain lit, take your vehicle to an authorized Kia dealer and have the system checked
•The EPB should not be operated while the vehicle is moving
• A click or electric brake motor sound may be heard while operating or releasing the EPB, but these conditions are normal and indicate that the EPB is functioning properly
Electric Parking Brake (EPB)*
The Electric Parking Brake (EPB) system utilizes
an electric motor to engage the parking brake .
Applying the Parking Brake
Depress the brake pedal and pull up the EPB
switch A . Ensure that the indicator light is
illuminated on the instrument cluster .
Releasing the Parking Brake
The EPB will automatically release when the
shifter is placed in Reverse or Drive .
To release EPB manually, depress the brake pedal, then press the EPB
switch A, with the ignition switch in the ON position . Ensure that the
indicator light i s O F F .
Electric Parking Break (EPB)/AUTO HOLD Video
To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
QR CODE
www.KuTechVideos.com/tf23/2015
AUTO HOLD*
Refer to page 4 for location of Instrument Cluster indicators.
•
•When leaving your keys with parking lot attendants or valet, make sure to inform them how to operate the EPB •If parked on a steep incline, pull up the EPB switch for more than 3 seconds for a firmer EPB application •Pull up and hold EPB switch a second time to increase brake pressure if parked on a decline or incline
QUICK TIPS
A
B
(Located on Center Panel)
OPTIMA HYBRID FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
DRIVER'S PANEL

17
For more information on Electronic Stability Control (ESC) and its specific features and operations, please refer to your Owner’s Manual.
Electronic Stability Control (ESC)
The ESC system is designed to help stabilize the vehicle during cornering
maneuvers . It is a good idea to keep the ESC turned ON for daily driving
whenever possible .
Press ESC OFF button B to disable Traction Control in ESC (ESC OFF indicator
will illuminate) .
To turn both Traction Control and Stability Control off, press and hold ESC OFF
button B (ESC OFF indicator will illuminate, and an alert sounds) .
REMINDERS:
•ESC is active by default at vehicle start-up
• The ESC Indicator Light in the instrument cluster will illuminate whenever the ESC is in operation
Instrument Panel Dimmer
Toggle switch A up or down to adjust display brightness of the instrument
panel illumination .
REMINDER: The Instrument Panel Dimmer does not adjust brightness on the Navigation System screen, use Navigation setup to adjust brightness on the Navigation System .
HAC helps prevent the vehicle from rolling backward when accelerating
from a stop while on a steep incline .
The HAC automatically activates whether the ESC is OFF or ON but does
NOT activate when the ESC has malfunctioned .
REMINDERS:
•The HAC does not operate when the gear shift is in the P (Park) or the N (Neutral) position .
•In the event of HAC system malfunction, see Authorized Kia Dealer for service .
(Located left of Steering Wheel)
Hill-Start Assist Control (HAC)
•
•When HAC is active (e .g ., accelerating from a stop on an incline), you may notice that the brakes will momentarily remain engaged after you depress the accelerator •HAC provides a 2-second delay before the vehicle may start rolling backward
QUICK TIPS
AB
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
DRIVER'S PANEL

19
A Pull/Press to operate Driver’s and Front Passenger’s Windows
Auto-Up/Down*
B Press to Unlock /Lock All Doors
C Press to disable Rear Passenger Windows
Power Windows, Window Lock
& Central Door Lock
REMINDER: When pressed C, window controls for the Rear Passenger Windows are disabled .
REMINDER: To lock position of mirrors, toggle switch to the neutral (center) position .
Power Folding Outside Mirrors*
Toggle D left or right to select mirror . Then press arrows to adjust
mirror position .
To both fold and unfold the outside rearview mirror, press the folding
mirror button E as pictured .
Power/Heated Outside Mirrors*
Mirror heaters controlled with Rear Defroster .
Automatic Door Lock/Unlock
Auto Door Lock /Unlock will engage when the gear shift is moved in to
or out of the P (Park) position . Refer to the User Settings in the LCD
Instrument Cluster modes on how to turn Auto Door Lock /Unlock ON/OFF .
To automatically fold mirrors when exiting vehicle, press the LOCK button once on the key fob or Smart Key* .
QUICK TIP
A
BC
D
E
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
DRIVER'S PANEL