2015 JEEP CHEROKEE brake

Wheel And Wheel Trim Care
•All wheels and wheel trim, especially aluminum and
chrome plated wheels, should be cleaned regularly
with a mild soap and water to prevent corrosion.
•To remove heavy soil and/or excessive brake dust, use
MOPAR® Wheel Cleaner.
NOTE:If your vehicle is equipped with Dark Vapor or
Black Satin Chrome wheels DO NOT USE wheel cleaners,
abrasives or polishing compounds. They will perma-
nently damage this finish and such damage is not cov-
ered by the New Vehicle Limited Warranty. USE ONLY
MILD SOAP AND WATER WITH A SOFT CLOTH. Used
on a regular basis this is all that is required to maintain
this finish.
CAUTION!
Do not use scouring pads, steel wool, a bristle brush,
or metal polishes. Do not use oven cleaner. These
products may damage the wheel’s protective finish.
Avoid automatic car washes that use acidic solutions
or harsh brushes that may damage the wheel’s pro-
tective finish. Only MOPAR® Wheel Cleaner or
equivalent is recommended.
Stain Repel Fabric Cleaning Procedure — If
Equipped
Stain Repel seats may be cleaned in the following man-
ner:
•Remove as much of the stain as possible by blotting
with a clean, dry towel.
•Blot any remaining stain with a clean, damp towel.
7
MAINTAINING YOUR VEHICLE 701

CavityBlade FuseCartridge FuseDescription
F06––Not Used
F0715 Amp Blue–Powertrain Control Module -
PCM
F0825 Amp Clear–Engine Control Module (ECM)
F09––Not Used
F1020 Amp Yellow–Power Transfer Unit (PTU) – If
Equipped
F11––Not Used
F1220 Amp Yellow–Brake Vacuum Pump - If
Equipped
F1310 Amp Red–Engine Control Module (ECM)
F1410 Amp Red–Drivetrain Control Module
(DTCM) / Power Take-Off Unit
(PTU) / Brake System Module
(BSM) – If Equipped
F15––Not Used
7
MAINTAINING YOUR VEHICLE 707

CavityBlade FuseCartridge FuseDescription
F37––Not Used
F38––Not Used
F38–60 Amp Yellow Glow Plugs (Diesel Only) - If
Equipped
F39–40 Amp GreenHVAC Blower Motor
F40–20 Amp BlueTrailer Tow Park Light - If
Equipped
F40–30 Amp PinkHeadlamp Washer Pump - If
Equipped
F41–60 Amp Yellow Body Controller Module (BCM)
- Feed 1
F41–50 Amp RedVoltage Stability Module - Feed
1 - If Equipped with Stop/Start
Engine Option
F42–30 Amp PinkTrailer Tow Electric Brake Mod-
ule
710 MAINTAINING YOUR VEHICLE

CavityBlade FuseCartridge FuseDescription
F52–30 Amp PinkFront Wipers - If Equipped
with Stop/Start Engine Option
F53–30 Amp PinkBrake System Module & Valves
F54–30 Amp PinkBody Control Module (BCM)
Feed 3
F5510 Amp Red–Blind Spot Sensors / Compass
/ Rearview Camera / Trunk
Lamp With Flashlamp Charger
- If Equipped
F5615 Amp Blue–Ignition Node Module
(IGNM)/KIN/RF Hub/Electric
Steering Column Lock (ESL)
F5720 Amp Yellow–Trailer Tow Lights Left - If
Equipped
F5810 Amp Red–Occupant Classification Module
712 MAINTAINING YOUR VEHICLE

CavityBlade FuseCartridge FuseDescription
F7710 Amp Red–Fuel Door Release/Brake Pedal
Switch
F7810 Amp Red–Diagnostic Port
F7910 Amp Red–Integrated Center Stack (ICS) /
HVAC / Aux Switch Bank
Module (ASBM) / Instrument
Panel Cluster (IPC)
F8020 Amp Yellow–Radio / CD - If Equipped
F81––Not Used
F82––Not Used
F83–20 Amp BlueEngine Controller Module
(Gas)
F84–30 Amp PinkElectric Park Brake (EPB) - Left
F85––Not Used
F8620 Amp Yellow–Horns - If Equipped With
Stop/Start Engine Option
716 MAINTAINING YOUR VEHICLE

CavityBlade FuseCartridge FuseDescription
F87A20 Amp Yellow–HID Headlamp Left - If
Equipped with Stop/Start En-
gine Option
F8815 Amp Blue–Collision Mitigation Module
(CMM) / Electrochromatic Mir-
ror / Smart Camera Module -
If Equipped
F8910 Amp Red–Headlamp Leveling - If
Equipped
F90––Not Used
F9120 Amp Yellow–Power Outlet Rear
F92––Not Used
F93–40 Amp GreenBrake System Module (BSM) -
Pump Motor
F94–30 Amp PinkElectric Park Brake (EPB) -
Right
7
MAINTAINING YOUR VEHICLE 717

Chassis
ComponentFluid, Lubricant, or Genuine Part
Automatic TransmissionUse only MOPAR® ZF 8&9 Speed ATF™ Automatic
Transmission Fluid, or equivalent.
Failure to use the correct fluid may affect the function or
performance of your transmission.
Brake Master CylinderWe recommend you use MOPAR® DOT 3 Brake Fluid,
SAE J1703 should be used. If DOT 3, SAE J1703 brake
fluid is not available, then DOT 4 is acceptable. Use only
recommended brake fluids.
730 MAINTAINING YOUR VEHICLE

•Check tire pressure and look for unusual wear or
damage. Rotate tires at the first sign of irregular wear,
even if it occurs before the oil indicator system turns
on.
•Check the fluid levels of the coolant reservoir and
brake master cylinder, fill as needed.
•Check function of all interior and exterior lights.
Required Maintenance Intervals.
Refer to the maintenance schedules on the following
page for the required maintenance intervals.
At Every Oil Change Interval As Indicated By Oil
Change Indicator System:
•Change oil and filter
•Rotate the tires.Rotate at the first sign of irregu-
lar wear, even if it occurs before the oil indicator
system turns on.
•Inspect battery and clean and tighten terminals as
required
•Inspect brake pads, shoes, rotors, drums, hoses
and park brake
•Inspect engine cooling system protection and
hoses
•Inspect exhaust system
•Inspect engine air cleaner if using in dusty or
off-road conditions
8
MAINTENANCE
SCHEDULES
MAINTENANCE SCHEDULES 733