VEHICLE ACCESS
4
COMFORT ADJUSTMENTS
5
Luggage compartment
See page 2, item 25.
Luggage compartment opening
1.
Press the release b
utton.
2. Alternatively, press the button on the facia.
Convertible roof operation
DO NOT press the engine START/STOP
b
utton while the roof is operating. Doing so will
cause the system to lose its position memor
y.
DO NOT open the Luggage compartment while
the roof is oper
ating. This will cause the operation
to stop
.
Convertible roof
To open or close the convertible top, the vehicle should
be stationary with the ignition on or the engine running.
Note: The luggage separator MUST be in the correct
position before the roof will retract. See the Owner’s
Handbook, Convertible roof section.
1.
T
o open, press and hold the switch in the overhead
console
. An audible chime indicates the start of the
opening process
. The rear windows will open, the top
will unlatch and star
t to move, and the front windows
will fully lo
wer. When the process is complete, another
audib
le chime is given.
2.
Release the s
witch. 1.
T o close, pull back and hold the switch. Once again,
an audib le chime will be given. If the windows have
been r
aised, they will will lower before the roof moves
bac
k into position. When the roof is fully closed and
latched, all windo
ws will close. When the process is
complete
, another audible chime is given.
2.
Release the s
witch.
Setting the driving position
Driver’s seat
Set the seat position using the following controls on the
door panel:
1.
Cushion length.
2.
Lumbar suppor
t.
3.
Seatbac
k angle.
4.
Side bolster adjustment.
5
.
Seat f
orwards and back, cushion height and cushion
angle.
Note: Seat heating and cooling controls are accessed via
the Touch screen.
Storing the driving position to memory
When the driver’s seat, steering wheel and door mirrors
are adjusted to the required position, the settings can be
stored.
Press the M button to activate the memory store function.
The red LED will illuminate.
Steering wheel position
See page 2, item 22.
1. With the v ehicle stationary, turn the rotary control to
the COLUMN position.
2.
With the toggle control, adjust the height and reach of
the steer
ing wheel to the required driving position.
Exit mode
When the rotary control is set to AUTO and the driver’s
door is opened, the steering wheel will move up to
provide greater clearance for exiting. The steering wheel
will remain in this position until the driver’s door is closed
and the ignition is turned on.
Door mirror positions
1. Press the left or r ight mirror selector.
2.
Use the mirror adjuster to set the mirror’
s position.
Mirror dip when reversing
Reverse dip can be enabled or disabled via the Touch
screen. From the Home screen, select Vehicle, then
Veh.
settings, and then Parking.
Powerfold mirrors
1.
Press both b
uttons simultaneously to fold the
mirrors inw
ard. Press again to unfold. The mirrors can
be prog
rammed to unfold/fold automatically at vehicle
unloc
k/lock. See your Owner’s Handbook.
Press button 1, 2, or 3, within 5 seconds, to store the
current driving position to the chosen number. The LED
will extinguish and a chime will sound.
Use a stored memory position by pressing the required
memory button. The seat, steering wheel and mirrors will
move to their preset positions.
DO NOT leave the Smart key inside the Luggage
compartment. The vehicle WILL NOT automatically
unlock if the Smart key is shielded.
DO NOT operate the convertible top if the vehicle is
travelling at speeds greater than 15 mph (24 km/h).
Doing so may damage the convertible top and/or its
operating mechanism.
