2015 INFINITI QX60-HYBRID spare wheel

[x] Cancel search: spare wheel

Page 468 of 577

INFINITI QX60-HYBRID 2015  Owners Manual To shut off the engine in an emergency situation
while driving, perform the following procedure:
– Rapidly push the push-button ignition switchthree consecutive times in less than 1.5 sec-
onds, or

Page 471 of 577

INFINITI QX60-HYBRID 2015  Owners Manual 3. Remove the jackB, winch socketC, ex-
tension
D, and wheel nut wrenchE. 4. The lowering mechanism for the spare tire is
located on the passenger side of the cargo
area. Remove the cover to acces

Page 472 of 577

INFINITI QX60-HYBRID 2015  Owners Manual NOTE:
Fully lower the spare tire below the vehicle
before attempting to remove the winch
from the spare tire.
CAUTION
●Make sure safety cable is coiled above
spare tire when reinstalling spare
tire/

Page 474 of 577

INFINITI QX60-HYBRID 2015  Owners Manual NOTE:
If the lug nut wrench/jack handle contacts
the ground while raising the vehicle, disas-
semble the lug nut wrench from the jack
extension rod, rotate it 90 degrees and re-
assemble.5. Remove the

Page 475 of 577

INFINITI QX60-HYBRID 2015  Owners Manual Adjust tire pressure to the COLD pressure.
COLD pressure: After vehicle has been
parked for 3 hours or more or driven less
than 1 mile (1.6 km) .
COLD tire pressures are shown on the tire
and loading

Page 494 of 577

INFINITI QX60-HYBRID 2015  Owners Manual When driving in areas using road salt or other
corrosive materials, check lubrication frequently.
Lights*Clean the headlights on a regular basis.
Make sure that the headlights, stop lights, tail
light

Page 522 of 577

INFINITI QX60-HYBRID 2015  Owners Manual If you have a flat tire, refer to “Flat tire” in
the “In case of emergency” section of this
manual for additional information.
TIRE PRESSURE
Tire Pressure Monitoring System
(TPMS)
WARNING
Radi

Page 530 of 577

INFINITI QX60-HYBRID 2015  Owners Manual Wheel nut tightening torque:83 ft-lb (113 N·m)
The wheel nuts must be kept tight-
ened to specifications at all times. It
is recommended that wheel nuts be
tightened to specification at each
tire rot
Page:   < prev 1-8 9-16 17-24 next >