2015 INFINITI Q70 key

13
Trunk Lid Release
Use one of the following methods to unlatch the trunk lid
then lift the lid to open the trunk:


Push the trunk open request switch
1 under the

trunk handle while carrying
the INFINITI Intelligent
Key with you.


Press the HOLD button
2 on the Intelligent Key for

more than 1 second.


From inside the vehicle, push the trunk lid
release switch

3 .
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
Seat Adjustments
To slide the seat forward or backward, push the switch


1 forward or backward.

To recline the seatback, push the switch
2
forward or backward.
SEAT LIFTER

To adjust the angle of the front seat cushion or height
of the seat, push the front or rear end of the switch

1 up or down.

LUMBAR SUPPORT

To adjust the seat lumbar support, push the front or back end of the swi\
tch
3 .
For more information, refer to the “Safety ——Seats, seat belts and supplemental restraint system (section 1)”\
of your
Owner’s Manual.
1
2
3
123
1727653‎_15b_Infiniti_Q70_QRG_100814.indd 1310/8/14 11:36 AM

14
first drive features
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner

1 memory.

Follow this procedure to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
•
Adjust the driver’s seat, steering column and outside mirrors to the \
desired positions using

the adjusting switches for each feature.
•
Push the SET switch and within 5 seconds push the memory switch (1
or 2) for at least
1 second.
•
The indicator light on the memory switch you select will illuminate for \
approximately

5 seconds.
• The driver’s seat, steering column and outside mirror positions are n\
ow set to
your preferences.

These memorized positions can also be linked to your INFINITI Intelligen\
t Key.

To link a memorized position to your INFINITI Intelligent Key, press the\
unlock button on the
key fob after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the control
switch

1 right or left.

Adjust each mirror to the desired position using
the switch

2 .

To fold the outside rearview mirrors, push the switch
3 to the
position. To unfold the outside rearview
mirrors, push the switch
3 to the
position.
REVERSE TILT-DOWN FEATURE

When backing up the vehicle, the right or left outside mirror can be sel\
ected to automatically
turn downward.
1. Push the ignition switch to the ON position.
2. Move the shift lever to the R (REVERSE) position.
3. Choose the right or left outside mirror by operating the outside mirr\
or control switch

1 .
4. The outside mirror surface moves downward.

When one of the following conditions has occurred, the outside mirror su\
rface will return to
its original position.
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the center or neutral positi\
on.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1
1
23
1727653‎_15b_Infiniti_Q70_QRG_100814.indd 1410/8/14 11:36 AM

15
Starting/Stopping the Engine
It is important to make sure the INFINITI Intelligent
Key is with you (that is, in your pocket or purse).

Depress the brake pedal.

Press the ignition switch START/STOP button to start
the engine.
TURNING THE ENGINE OFF

Move the shift lever to the P (PARK) position and
apply the parking brake.

Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control Switch
HEADLIGHT CONTROL

Turn the headlight control switch to the position
1 to turn on the front parking, side marker, tail, license

plate and instrument panel lights. Turn the switch to
the
position
2 to turn on the headlights.
AUTOLIGHT SYSTEM

The autolight system will automatically turn the headlights on when it i\
s dark and off when it is
light. The system will keep the headlights on for a period of time after\
you turn the ignition off
and all doors are closed.

To activate the autolight system, turn the headlight control switch to t\
he AUTO position
3
then push the ignition switch to the ON position. To deactivate the autolight system, turn the
headlight control switch to the OFF,
position
1 or
position
2 .
HIGH BEAM SELECT

Push the headlight control switch forward
4 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel.
Pull the headlight switch back to the original
position to select the low beam. The blue indicator
light extinguishes.

Pull and release the headlight control switch
5 to

flash the headlight high beams on and off.
3
1
2
45
1727653‎_15b_Infiniti_Q70_QRG_100814.indd 1510/8/14 11:37 AM

23
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.


For vehicles equipped with Navigation:
•
Refer to the “Voice recognition (section 9)” of your Navigation System Owner’s Manual
for more information.

The “Help” command can be used to hear a list of available command\
s at any time.

Reduce background noise as much as possible by closing windows and point\
ing HVAC vents
away from the ceiling.

Speak naturally without long pauses and without raising your voice.

When speaking phonebook names, please be aware some phones require the l\
ast name to be
spoken before the first name. For example, “Michael Smith” may be \
spoken as “Smith Michael”.

To cancel a Voice Recognition session, say “Cancel” or “Quit”\
or press and hold the
or

button for 5 seconds.

To go back to the previous command, say “Go back” or “Correctio\
n”.

If the Voice Recognition system does not recognize your voice commands, \
train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.

For more detailed information and instructions, refer to your cellular p\
hone’s Owner’s Manual and
visit www.InfinitiUSA.com/bluetooth.
Bluetooth® System with Navigation* (if so equipped)
CONNECTING PROCEDURE


The vehicle must be stationary when connecting
the phone.*
1. Press the

button on the steering wheel and select
the “Connect Phone” key.



2. Initiate connecting from the phone.
• The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned
by INFINITI and cannot be changed.)
3. When connecting is complete, the screen will
return to the Phone menu.
1727653‎_15b_Infiniti_Q70_QRG_100814.indd 2310/8/14 11:38 AM

24
system guide
PHONEBOOK SETUP

Depending on your cellular phone, the system may
automatically download your cellular phone’s
entire phonebook to the vehicle’s Bluetooth system.

If the phonebook does not download automatically,
the vehicle’s phonebook may be set for up to
40 entries.

To manually download entries:
1. Press the
button and select the “Quick Dial” key.
2. Select the “Add New” key at the top of the display.
There are different methods to input a phone
number. Select one of the following options:
• “Copy from Call History”- to save a number from
the Outgoing, Incoming or Missed Calls lists.
• “Copy from the Phonebook”- to save a number that has been downloaded from your
handset to the vehicle.
• “Enter Number by Keypad”- to input the number and name manually.
MAKING A CALL
To make a call, follow this procedure:
1. Press the

button on the steering wheel. The “Phone”

menu will appear on the control panel display.
2. Select the “Quick Dial”, “Call History”, “Phonebook”
or “Dial Number” key.
3. Select the desired entry from the list.
4. Select “Call” to start dialing the number.
RECEIVING/ENDING A CALL

To accept the call, press the button on the steering

wheel or touch the “Answer” key. To reject the call,
touch the “Reject Call” key.


To hang-up, press the button or touch the

“Hang up” key.
1727653‎_15b_Infiniti_Q70_QRG_100814.indd 2410/8/14 11:38 AM