2015 Hyundai Sonata Hybrid homelink

431
Features of your vehicle
MIRRORS
Inside rearview mirror
Adjust the rearview mirror so that the
center view through the rear window is
seen. Make this adjustment before you
start driving.
Day/night rearview mirror
Make this adjustment before you start
driving and while the day/night lever is in
the day position.
Pull the day/night lever toward you to
reduce glare from the headlights of the
vehicles behind you during night driving.
Remember that you lose some rearviewclarity in the night position. Electric chromic mirror (ECM) with
HomeLink
®system and compass
(if equipped)
Your vehicle may be equipped with a
Gentex Automatic-Dimming Mirror with a
Z-Nav™ Electronic Compass Display
and an Integrated HomeLink
®Wireless
Control System. During nighttime driving,
this feature will automatically detect and
reduce rearview mirror glare while the
compass indicates the direction the vehi-
cle is pointed. The HomeLink
®Universal
Transceiver allows you to activate your
garage door(s), electric gate, home light-
ing, etc.
WARNING - Rear visibility
Do not place objects in the rear
seat or cargo area which would
interfere with your vision through
the rear window.
OYF049028N
Day
Night
WARNING
Do not modify the inside mirror and
do not install a wide mirror. It could
result in injury, during an accident
or deployment of the air bag.

Features of your vehicle
34
4
To adjust the Zone setting:
1. Determine the desired Zone Number
based upon your current location on
the Zone Map.
2. Press and hold the button for 6 sec- onds, the current Zone Number will
appear on the display.
3. Pressing and holding the button again will cause the numbers to incre-
ment (Note: they will repeat …13, 14,
15, 1, 2, …). Releasing the button
when the desired Zone Number
appears on the display will set the new
Zone.
4. Within about 5 seconds the compass will start displaying a compass head-
ing again.
There are some conditions that can
cause changes to the vehicle magnets,
such as installing a ski rack or a CB
antenna. Body repair work on the vehicle
can also cause changes to the vehicle's
magnetic field. In these situations, the
compass will need to be re-calibrated to
quickly correct for these changes. To re-
calibrate the compass: 1. Press and hold the button for more
than 9 seconds. When the compass
memory is cleared a "C" will appear in
the display.
2. To calibrate the compass, drive the vehicle in 2 complete circles at less
than 5 mph (8 km/h).
Integrated HomeLink
®Wireless Control
System
The HomeLink
®Wireless Control System
provides a convenient way to replace up
to three hand-held radio-frequency (RF)
transmitters with a single built-in device.
This innovative feature will learn the
radio frequency codes of most current
transmitters to operate devices such as
gate operators, garage door openers,
entry door locks, security systems, even
home lighting. Both standard and rolling
code-equipped transmitters can be pro-
grammed by following the outlined proce-
dures. Additional HomeLink
®information
can be found at: www.homelink.com or
by calling 1-800-355-3515. Retain the original transmitter of the RF
device you are programming for use in
other vehicles as well as for future
HomeLink
®programming. It is also sug-
gested that upon the sale of the vehicle,
the programmed HomeLink
®buttons be
erased for security purposes.
WARNING
Before programming HomeLink®to
a garage door opener or gate oper-
ator, make sure that people and
objects are out of the way of the
device to prevent potential harm or
damage. Do not use HomeLink
®
with any garage door opener that
lacks the safety stop and reverse
features required by U.S. federal
safety standards (this includes any
garage door opener model manu-
factured before April 1, 1982). A
garage door that cannot detect an
object - signaling the door to stop
and reverse - does not meet current
U.S. federal safety standards. Using
a garage door opener without these
features increases the risk of seri-
ous injury or death.

435
Features of your vehicle
Programming HomeLink®
✽
✽NOTICE
• When programming a garage door
opener, it is advised to park the vehi-
cle outside of the garage.
• It is recommended that a new battery be placed in the hand-held transmit-
ter of the device being programmed to
HomeLink
®for quicker training and
accurate transmission of the radio-
frequency signal.
• Some vehicles may require the igni- tion switch to be turned to the second
(or "accessories") position for pro-
gramming and/or operation of
HomeLink.
• In the event that there are still pro- gramming difficulties or questions
after following the programming steps
listed below, contact HomeLink
®at:
www.homelink.com or 1-800-355-
3515.
Programming
To train most devices, follow these
instructions:
1. For first-time programming, press and
hold the two outside buttons ( ,),
HomeLink
®Channel 1 and Channel 3,
until the indicator light begins to flash
(after 10 seconds). Release both but-
tons. Do not hold the buttons for longer
than 20 seconds. 2. Position the end of your hand-held
transmitter 1-3 inches (2-8 cm) away
from the HomeLink
®button you wish to
program while keeping the indicator
light in view.
3. Simultaneously press and hold both the HomeLink
®and hand-held trans-
mitter buttons until the HomeLink®indi-
cator light changes from a slow to a
rapid blinking light. Now you may
release both the HomeLink
®and hand-
held transmitter buttons.
OYF042252N
Flashing
OYF042251N
Flashing

Features of your vehicle
36
4
✽
✽
NOTICE
Some devices may require you to replace
this Programming step 3 with procedures
noted in the "Gate Operator/Canadian
Programming" section. If the
HomeLink
®indicator light does not
change to a rapidly blinking light after
performing these steps, contact
HomeLink
®at www.homelink.com.
4. Firmly press, hold for 5 seconds and
release the programmed HomeLink®
button up to two separate times to acti-
vate the door. If the door does not acti-
vate, press and hold the just-trained
HomeLink
®button and observe the
indicator light.
stantly, programming is complete and
your device should activate when the
HomeLink
®button is pressed and
released.
If the indicator light blinks rapidly for 2 seconds and then turns to a constant
light, continue with "Programming"
steps 5-7 to complete the program-
ming of a rolling code equipped
device (most commonly a garage
door opener).
5. At the garage door opener receiver (motor-head unit) in the garage, locate
the "leam" or "smart" button. This can
usually be found where the hanging
antenna wire is attached to the motor-
head unit. 6. Firmly press and release the "leam" or
"smart" button. (The name and color of
the button vary by manufacturer).
There are 30 seconds to initiate step 7.
7. Return to the vehicle and firmly press, hold for 2 seconds and release the pro-
grammed HomeLink
®button. Repeat
the "press/hold/release" sequence a
second time, and, depending on the
brand of the garage door opener (or
other rolling code equipped device),
repeat this sequence a third time to
complete the programming process.
HomeLink
®should now activate your
rolling code equipped device.

437
Features of your vehicle
Gate operator & Canadian program-
ming
During programming, your handheld
transmitter may automatically stop trans-
mitting. Continue to press the Integrated
HomeLink
®Wireless Control System but-
ton (note steps 2 through 3 in the
Programming portion of this document)
while you press and re-press ("cycle")
your handheld transmitter every two sec-
onds until the frequency signal has been
learned. The indicator light will flash
slowly and then rapidly after several sec-
onds upon successful training.
Operating HomeLink
®
To operate, simply press and release the
programmed HomeLink®button.
Activation will now occur for the trained
device (i.e. garage door opener, gate
operator, security system, entry door
lock, home/office lighting, etc.). For con-
venience, the hand-held transmitter of
the device may also be used at any time. Reprogramming a single HomeLink
®
button
To program a device to HomeLink®using
a HomeLink®button previously trained,
follow these steps:
1. Press and hold the desired HomeLink
®
button. DO NOT release the button.
2. The indicator light will begin to flash after 20 seconds. Without releasing the
HomeLink
®button, proceed with
"Programming" step 2.
For questions or comments, contact
HomeLink
®at www.homelink.comor 1-
800-355-3515.
Erasing HomeLink
®buttons
Individual buttons cannot be erased.
However, to erase all three programmed
buttons:
1. Press and hold the two outer HomeLink
®buttons until the indicator
light begins to flash after 10 seconds.
2. Release both buttons. Do not hold for longer than 20 seconds.
The Integrated HomeLink
®Wireless
Control System is now in the training
(learn) mode and can be programmed at
any time following the appropriate steps
in the Programming sections above. FCC ID: NZLTLMHL4
IC: 4112A-TLMHL4
This device complies with Part 15 of
the FCC Rules.
Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any interfer- ence received, including interference
that may cause undesired operation.
NVS
®is a registered trademark and Z-
Nav™ is a trademark of the Gentex
Corporation, Zeeland, Michigan.
HomeLink
®is a registered trademark
owned by Johnson Controls,
Incorporated, Milwaukee, Wisconsin.
CAUTION
The transceiver has been tested and complies with FCC and Industry Canada rules. Changes or modifica-tions not expressly approved by theparty responsible for compliancecould void the user's authority to operate the device.

Index
4I
Displays, see instrument cluster··················\
·········4-40
Door locks ··················\
··················\
················4-11
Central door lock switch ··················\
··············4-12
Child-protector rear door lock ··················\
········4-14
Drinks holders, see cup holders ··················\
········4-121
Driver's 3-point system with emergency
locking retractor··················\
··················\
······ ·3-18
Driver's air bag ··················\
··················\
·········· ·3-48
Driving at night ··················\
··················\
········· ·5-31
Driving in flooded areas ··················\
················· ·5-32
Driving in the rain ··················\
··················\
······ ·5-32
Driving off-road ··················\
··················\
········· ·5-32
ECO GUIDE gauge ··················\
··················\
···· ·4-43
Economical operation ··················\
··················\
·· ·5-28
Electric chromic mirror (ECM) with HomeLink system· ·4-31
Electric power steering ··················\
··················\
· ·4-29
Electronic stability control (ESC) ··················\
·······5-19
Emergency starting ··················\
··················\
········6-6
Jump starting ··················\
··················\
···········6-6
Push starting ··················\
··················\
············6-7
Emergency while driving ··················\
··················\
6-2
Emission control system ··················\
················· ·7-77
Crankcase emission control system ··················\
··7-77
Evaporative emission control system ··················7-77
Exhaust emission control system · · · · · · · ···············7-78 Engine · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
··················8-2
Engine compartment ··················\
················· ·2-4, 7-2
Engine compartment fuse ··················\
··············· ·7-53
Engine coolant ··················\
··················\
·········· ·7-24
Engine number ··················\
··················\
··········· ·8-7
Engine oil ··················\
··················\
·················7-22
Engine overheats ··················\
··················\
········· ·6-8
Engine start/stop button ··················\
··················\
· ·5-5
Engine temperature gauge ··················\
··············· ·4-42
Engine will not start ··················\
··················\
····· ·6-5
Evaporative emission control system ··················\
···7-77
Exhaust emission control system ··················\
········7-78
Explanation of scheduled maintenance items ···········7-19
Exterior care ··················\
··················\
··············7-71
Flat tire (with spare tire) ··················\
················· ·6-14
Changing tires ··················\
··················\
······· ·6-15
Compact spare tire ··················\
··················\
·· ·6-20
Jack and tools ··················\
··················\
·········6-14
Removing and storing the spare tire ··················\
·6-15
Flat tire (with tire mobility kit) ··················\
··········6-22
Components of the tire mobility kit ··················\
·6-24
T

echnical data ··················\
··················\
·········6-27
Using the tire mobility kit ··················\
·············6-25
Floor mat anchor(s) ··················\
··················\
··· ·4-124
E
F

I5
Index
FluidBrakes fluid ··················\
··················\
·········· ·7-27
Washer fluid ··················\
··················\
·········· ·7-28
Front passenger and rear seat 3-point system with combination locking retractor ··················\
········3-19
Front seat adjustment ··················\
··················\
·····3-4
Fuel filler lid··················\
··················\
··············4-22
Fuel gauge ··················\
··················\
··············· ·4-43
Fuel requirements ··················\
··················\
·········1-3
Fuse/relay panel description ··················\
·············7-55
Fuses ··················\
··················\
··················\
···· ·7-51
Engine compartment fuse ··················\
·············7-53
Fuse/relay panel description ··················\
··········7-55
Instrument panel fuse ··················\
················· ·7-52
Memory fuse ··················\
··················\
········· ·7-52
Multi fuse ··················\
··················\
··············7-54
Gauge Engine temperature gauge ··················\
············4-42
Fuel gauge ··················\
··················\
············ ·4-43
Glass antenna ··················\
··················\
·········· ·4-125
Glove box ··················\
··················\
···············4-119 Hazard warning flasher
··················\
··················\
·4-70
Hazardous driving conditions ··················\
············5-30
Headlight bulb replacement ··················\
··············7-62
Headrest ··················\
··················\
············ ·3-7, 3-11
High voltage battery ··················\
··················\
···· ·7-80
Highway driving ··················\
··················\
·········5-33
Hill-start assist control (HAC) ··················\
···········5-22
Homelink mirror, see the Electric chromic mirror (ECM) with HomeLink system ··················\
······4-31
Hood ··················\
··················\
··················\
···· ·4-21
Horn ··················\
··················\
··················\
···· ·4-30
How to use this manual ··················\
··················\
· ·1-2
Hybrid HMC Hybrid system ··················\
··················\
···H2
Sonata hev energy flow ··················\
··········H4, 4-45
State of charge (SOC) ··················\
··················\
·H3
The air intake of hybrid battery ··················\
······H12
The componets of hybrid vehicle ··················\
······H7
The ECO GUIDE gauge ··················\
············· ·4-43
The ECO level ··················\
··················\
·· ·H2, 4-47
The EV

MODE ··················\
··················\
······ ·4-53
The READY indicator ··················\
················ ·4-41
The service indicator ··················\
··················\
·4-53
Hybrid electric vehicle ··················\
··················\
· ·4-45
G
H

I7
Index
MaintenanceExplanation of scheduled maintenance items ········7-19
Maintenance services ··················\
··················\
··7-3
Maintenance under severe usage conditions ·········7-18
Normal maintenance schedule ··················\
·········7-8
Owner maintenance ··················\
··················\
···7-5
Scheduled maintenance service ··················\
········7-7
Tire maintenance ··················\
··················\
···· ·7-42
Maintenance schedule ··················\
··················\
····7-7
Maintenance under severe usage conditions ·········7-18
Normal maintenance schedule ··················\
·········7-8
Maintenance services ··················\
··················\
·····7-3
Memory fuse ··················\
··················\
············ ·7-52
Mirrors ··················\
··················\
··················\
· ·4-31
Day/night rearview mirror ··················\
············4-31
Electric chromic mirror (ECM) with Homelink system· ·4-31
Inside rearview mirror··················\
················ ·4-31
Outside rearview mirror ··················\
···············4-38
Multi box ··················\
··················\
··············· ·4-120
Multi fuse ··················\
··················\
·················7-54
Neck restraints, see headrest ··················\
········3-7, 3-11Occupant classification system
··················\
··········3-42
Odometer ··················\
··················\
·················4-41
Oil (Engine) ··················\
··················\
··············7-22
Outside rearview mirror ··················\
················· ·4-38
Overheats ··················\
··················\
··················\
·6-8
Owner maintenance ··················\
··················\
······ ·7-5
Panorama sunroof ··················\
··················\
······ ·4-25
Parking brake ··················\
··················\
············ ·5-16
Parking brake inspect ··················\
··················\
·· ·7-28
Passenger's front air bag ··················\
················· ·3-48
Power brakes ··················\
··················\
············ ·5-14
Power outlet ··················\
··················\
············ ·4-122
Power window lock button ··················\
···············4-20
Pre-tensioner seat belt ··················\
··················\
·· ·3-21
Push starting ··················\
··················\
·············· ·6-7
Rear seat ··················\
··················\
··················\
3-11
Rear view camera ··················\
··················\
······· ·4-70
Recommended cold tire inflation pressures ··············7-37
Recommended lubricants and capacities ··················8-5
Recommended SAE viscosity number ··················8-6
M
N
P
R
O