2015 Hyundai Santa Fe buttons

FEATURES AND CONTROLS
SANTA FE
11 10
HYUNDAI
HOMELINK WIRELESS CONTROL SYSTEM
Home Link
Standard Programming To train most devices, follow these instructions:
1. For first-time programming, press and hold the two outside buttons,
HomeLink
® Channel 1 and Channel 3 Buttons, until the indicator light
begins to flash (after 20 seconds). Release both buttons. Do not hold
the buttons for longer than 30 seconds.
2. Position the end of your hand-held transmitter 1-3 inches (2-8 cm)
away from the HomeLink
® buttons while keeping the indicator light
in view.
3. Simultaneously press and hold both the HomeLink
® and hand-held
transmitter button. DO NOT release the buttons until step 4 has
been completed.
4. While continuing to hold the buttons the red indicator Status LED
will flash slowly and then rapidly after HomeLink
® successfully trains
to the frequency signal from the hand-held transmitter. Release both
buttons.
For detail instructions, refer to your Owner’s Manual or visit
www.homelink.com.
INTERIOR LIGHTS
Push the lens
to turn the
map lamp on or off.
ON Map lamp and room lamp will turn on.OFF The lights stay off.DOOR Map lamp and room lamp
comes on when any door is opened.ROOM Map lamp and room lamp come on.
Press the switch to turn the light
on or off.
Map lampRoom lamp
54
Type A
Type A
4
5
1
1
Type BType B

FEATURES AND CONTROLS
SANTA FE
17 16
HYUNDAI
AIR INTAKE CONTROL DEFROSTING / DEFOGGING
3. Set the fan speed to
the highest setting.1. Press the front
windshield defrost
button.
Press to activate/deactivate the
rear window defroster.Press to activate/deactivate the
3rd row climate control.
3rd ROW CLIMATE CONTROL
Changing the direction of
the air flow as follows:MODE SELECTION
Face LevelBi-LevelFloor LevelFloor/Defrost LevelDefrost Level

MAX A/C (Max air conditioning)
button
A/C (Air conditioning) button
Mode selection buttons
Fan speed control knob Rear window defrost button Front windshield defrost button Temperature control button
Air intake control button9 3rd row climate control
ON/OFF button
10 3rd row fan speed control knob
11 3rd row blower ON/OFF button
12 3rd row mode selection button
13 3rd row temperature
control knob 3rd row air climate control
(for Type B)
NOTETo reduce tendency of the glass
fogging and also to improve visibility,
keep the interior surface of the
windshield clean by wiping it with
a clean cloth and glass cleaner.
Outside (fresh) air positionRecirculated air position Manual Climate Control
Manual Climate Control
9
10
1112
13
Type AType B
Type A
Type B Type A
Type A,B
Type B
8
2. Set the temperature
control towards
warmer setting.
REAR WINDOW AND SIDE
MIRRORS DEFROSTER

MULTIMEDIA
SANTA FE
29 28
HYUNDAI
AUDIO Press POWER button
to turn radio on.
r
TUNING / LISTENING TO CHANNELS
1. Press the Radio
button.
2 . Turn the TUNE/ENTER
knob to selec t the desired channel and press the knob.


NOTE A clear view of the southern sky helps ensure XM
® radio reception.
t SETTING PRESET MEMORY BUTTONS (FM/AM/XM
®)
Press and hold any preset button (1-6)
until an audible beep is heard to
store current channel.
t ADJUSTING THE SOUND CONTROL
1. Press the SETUP
button.
2. Select “Sound Settings” by turning and pressing the TUNE/ENTER
knob.
3. Select “Bass,” “Middle,” “Treble,” “Fader,” or “Balance” by turning and
pressing the TUNE/ENTER
knob.
4. Adjust the sound by turning and pressing the TUNE/ENTER
knob.
Please refer to your Owner’s Manual for more detailed information on how to use your audio system.
Complimentary XM subscription ends three months following the vehicle date of sale.
Please contact XM Radio at 1-800-XM-RADIO (1-800-967-2346) to renew your XM subscription.Standard Radio
Audio mode Press POWER button
to turn radio on.
t TUNING/LISTENING TO CHANNELS
1. Press FM/AM
or SAT
button of XM
®.
2. Press the TUNE
button to desired channel.
NOTE A clear view of the southern sky helps ensure XM
® radio reception.
t
SETTING PRESET MEMORY BUTTONS (FM/AM/XM
® )
Press and hold any preset button (1-6)
on the screen until
an audible beep is heard to store current channel.
t
ADJUSTING THE SOUND CONTROL
1. Press the SETUP
button and press the SOUND
button to display the Sound Settings screen.
2. Touch on-screen arrows to adjust desired setting.
t
SELECTING TRACK THROUGH SEARCH (CD MODE)
Press the TUNE
button to search tracks.
Once the desired track name is displayed, press the ENTER button.
NAVIGATION
AUX, USB, AND iPod
® PORT
Use the jack to
connect an external
audio device and listen
to it through the audio
system speakers in
your vehicle.