2015 HYUNDAI I20 bluetooth

AAudio / Video / Navigation sys-
tem (AVN) (if equipped)Detailed information for the AVN sys-
tem is described in a separately sup-
plied manual.
Bluetooth
®
Wireless Technology
hands-free (if equipped)
You can use the phone wirelessly by
using the
Bluetooth
®
Wireless
Technology. (1) Call / Answer button : Press the
button shortly.
Voice recognition mode (if
equipped) : Press the button
longer when you have an Android
Auto or Carplay connection.
(2) Call end button
(3) Microphone
• Audio : For detailed information, refer to “AUDIO” in this chapter.
• AVN : Detailed information for the
Bluetooth
®
Wireless Technology
hands-free is described in the man-
ual supplied separately.
OIB047197
OHCI057009R
#
!'%$&%" '&$

#!'%$&%" '&$
(Continued)
• When the Equalizer features of an
external device, such as the iPod
®,
and the audio system are both
active, Equalizer effects could over-
lap and cause sound deterioration
and distortion. Whenever possible,
turn off the Equalizer feature with-
in the external device when it is con-
nected to the audio system.
• Noise may occur when an iPod
®
or
AUX device is connected. When
such devices are not being used, dis-
connect the device for storage.
• When the iPod
®
or AUX device
power is connected to the power
jack, playing the external device
may result in noise. In such cases,
disconnect the power connection before use.
• Skipping or improper operation may occur depending on the charac-
teristics of your iPod
®/iPhone
®
device.
(Continued)(Continued)
• If your iPhone
®is connected to both
the Bluetooth
®
and USB, the sound
may not be properly played. In your
iPhone
®, select the Dock connector
or Bluetooth
®
to change the sound
output (source).
• iPod
®
mode cannot be operated
when the iPod
®
cannot be recog-
nized due to the playing of versions
that do not support communication
protocols, cases of iPod
®abnormali-
ties and defects.
• For fifth generation iPod
®
Nano
devices, the iPod
®may not be recog-
nized when the battery level is low.
Please charge the iPod
®
for use.
• The search/play orders shown with- in the iPod
®
device may differ from
the orders shown within the audio
system.
• If the iPod
®
malfunctions due to an
iPod
®
device defect, reset the iPod
®
and try again. (To learn more, refer
to your iPod
®
manual)
(Continued) (Continued)
• Some iPod
®s may not sync with the
System depending on the version. If
the Media is removed before the
Media is recognized, then the sys-
tem may not properly restore the
previously operated mode. (iPad
®
charging is not supported.)
• Use an iPod
®
cable shorter than 1
meter in length such as the one orig-
inally supplied with a new iPod
®,
longer cables may lead to the audio
system not recognizing the iPod
®.

#
!'%$&%" '&$
IInformation- Using Bluetooth
®
(BT) Audio
(if equipped)
• Bluetooth
®Audio Mode can be used
only when a Bluetooth
®
phone has
been connected.
• Bluetooth
®
Audio Mode will not be
available when connecting mobile
phones that do not support this fea-
ture.
• If a Bluetooth
®
Phone is being used
to play music and receives an
incoming or outgoing phone call,
then the music will stop.
• Moving the Track up/down while playing Bluetooth®audio mode may
result in pop noises with some
mobile phones.
• Bluetooth
®
streaming audio may
not be supported in some mobile
phones.
• When returning to Bluetooth
®
Audio mode after ending a call, the
mode may not automatically restart
in some mobile phones.
• Receiving an incoming call or mak- ing an outgoing call while playing
Bluetooth
®
Audio may result in
audio interference.
Media ModeChange Mode:
[MEDIA]
button
• Each time the button is pressed, the media mode popup will be dis-
played or closed.
• The media mode popup will not be displayed when
[SETUP/CLOCK]
button [Display] [Mode popup]
is turned [Off].
You can select a menu in the mode
popup by using the
[1]
~
[6]
(Preset) buttons or
TUNE
knob.
• If media device(USB, AUX) is con- nected, then it will automatically
operate. Once it is disconnected,
the previous mode will be restored.
• The Audio/Bluetooth
®(BT) Audio*/
AUX volume can also be con-
trolled.
* if equipped
Information
When you connect an Apple device,
playback does not start automatically.
Repeat:
[1 RPT]
button
• Repeats the current song or repeats all songs within the current
folder.
•iPod
®
mode: Repeat Song ➟
Repeat Off
• USB mode: Repeat Song ➟
Repeat Folder ➟ Off
Shuffle:
[2 SHFL]
button
• Plays all songs within the current
folder(category) or play all songs in
random order.
•iPod
®
mode: Shuffle All ➟ Shuffle
Off
• USB mode: Shuffle Folder ➟
Shuffle All ➟ Off
i
i

#!'%$&%" '&$Change Song/File: [
[
SEEK/TRACK]
button[∨ SEEK/TRACK]
button
• Pressing the button: Plays the cur- rent song from the beginning. If the
[∨ SEEK/TRACK]
button is pressed
again within 1 second, the previous
song is played.
• Pressing and holding the button (more than 1.0 second): Rewinds
the song.
[SEEK/TRACK ∧]
button
• Pressing the button: Plays the next song.
• Pressing and holding the button (more than 1.0 second): Fast-for-
wards the song.
Information
• BT Audio*, AUX don’t support Rewind/Fast-forward feature.
• Changing the previous/next song may not be supported in some
Bluetooth
®
devices.
* if equipped
Search Song:
TUNE
knob
(USB/iPod
®
only)
• Turning
TUNE
knob: Searches for
songs(files).
• Pressing
TUNE
knob: Plays selected
song(file).
Information
• BT Audio* and AUX don’t support playlist feature.
• In iPod
®
Mode, song (file) lists are
not supported if music is played
using the Music application after
connecting the iPod
®.
• While BT Audio* is playing, press- ing the
TUNE
knob plays and paus-
es the current song.
* if equipped
Search Folder:
[FOLDER]
button
Searches the previous/next folder.
(USB)
Information
If a folder is selected by pressing theTUNE
knob, the first file within the
selected folder will be played.
USBDisplays Menu Popup when pressing
the
[MENU]
button.
ListMoves to the list screen.InformationDisplays information of the current
song.Sound SettingsMoves to Sound Settings.
i
ii

#
!'%$&%" '&$
iiPod
®
Displays Menu Popup when pressing
the
[MENU]
button.
ListMoves to the list screen.InformationDisplays information of the current
song.Sound SettingsMoves to Sound Settings.
BT Audio (if equipped)Displays Menu Popup when pressing
the
[MENU]
button.
Sound SettingsMoves to Sound Settings.
Information
• Depending on the connected Bluetooth device, mobile phone, or
the music player you are using,
playback controls may differ.
• Depending on the music player you are using, streaming may not be
supported.
• Audio may not automatically start playing in some Bluetooth
®
devices.
If the music in the Bluetooth®device
is not played after changing to audio
streaming mode, press the TUNE
knob. Check if the music is playing
in the Bluetooth
®
device after
changing to audio streaming mode.
• Audio streaming may not be sup- ported for some Bluetooth
®
devices.
• If Bluetooth
®device is disconnected,
BT Audio is ended.
• Bluetooth
®connection is required to
use BT Audio. Refer to the
Bluetooth®
manual for more infor-
mation.
i

##!'%$&%" '&$
• Focus on the road while driving.The driver's primary responsibil-
ity is in the safe and legal oper-
a tion of the vehicle. Drivers
should not use any hand held
devices or other equipment or
vehicle systems that distract the
driver during vehicle operation.
• Do not stare at the multimedia screen for long periods of time
while driving. Staring at the
screen for prolonged periods of
time can lead to traffic accide nts
and can result in personal
injuries.
WARNING
AUXDisplays Menu Popup when pressing
the
[MENU]
button.
Sound SettingsMoves to Sound Settings.
Information
• AUX mode can be used only when an external audio player has been
connected.
• If only a cable is connected to the AUX without an external device, the
mode will be changed to AUX, but
noise may occur. When an external
device is not being used, remove the
connector jack.
• When the external device power is connected to the power jack, play-
ing the external device may output
noise. In such cases, disconnect the
power connection before use.
Phone (if Bluetooth equipped)
Information
- Using Bluetooth
®
(BT) Phone
What is Bluetooth
®Wireless Technology?
• Bluetooth
®
refers to a short-dis-
tance wireless networking technol-
ogy which uses a 2.45GHz fre-
quency to connect various devices
within a certain distance.
• Supported within PCs, external devices, Bluetooth
®
phones, PDAs,
various electronic devices, and auto- motive environments, Bluetooth
®
to
be transmitted at high speeds with- out having to use a connector cable.
• Bluetooth
®
Handsfree refers to a
device which allows the user to
conveniently make phone calls
with Bluetooth
®
devices through
the Multimedia system.
• The Bluetooth
®
Handsfree feature
may not be supported in some
Bluetooth
®
devices.
i
i

#
!'%$&%" '&$
••Bluetooth
®
is a feature that
enables drivers to make handsfree
calls. Connecting the head unit
with a Bluetooth
®phone allows the
user to conveniently make calls,
receive calls, and manage the
phonebook. Before using
B luetooth
®, carefully read the con-
tents of this user’s manual.
• Excessive use or operations while driving may le ad to negligent driv-
ing practices and be the cause of
accidents. Do not operate the
device excessively while driving.
• Viewing the screen for prolonged periods of time is dangerous and
may lead to accident s. When driv-
ing, view the screen only for short
periods of time.
• Pairing Bluetooth
®
devices and
use of other Bluetooth
®
features
are not supported when the vehicle
is in motion. For safety, please first
park your vehicle. • Be
fore connecting the head unit
with the Bluetooth
®
device, check
to see that the mobile device sup-
ports Bluetooth
®
features.
• Even if the mobile device supports Bluetooth
®, the device will not be
found during device searches if the
device has been set to hidden
state or the Bluetooth
®
power is
turned off. Disable the hidden state
or turn on the Bluetooth®
power
prior to searching/connecting with
the head unit.
• If a Bluetooth
®
device becomes
disconnected due to being out of
communication range, turning the
device OFF, or a Blueto oth
®
com-
munication error, corresponding
Bluetooth
®
devices are automati-
cally searched and reconnected.
• If you do not want automatic con- nection with your Bluetooth
®
device, turn the Bluetooth
®
feature
off in the Bluetooth
®
device.
(Continued) (Continued)
• Only one Bluetooth
®device can be
connected at a time.
• Bluetooth
®
connection may
become intermittently disconnect-
ed in some Bluetooth
®
devices.
Follow these steps to try again.
1. Turn the Bluetooth
®
function
within the Bluetooth®
device
OFF/ON and try again.
2. Turn the Bluetooth
®
device
power OFF/ON and try again.
3. Completely remove the Bluetooth
®
device battery,
reboot, and then again.
4. Reboot the Multimedia System and try again.
5. Delete all paired devices from
both of Bluetooth
®
device and
Head Unit sides and then try
again.
NOTICE
NOTICE

#
!'%$&%" '&$
•• If the Bluetooth
®
device is not con-
nected, it is not possible to enter
Phone mode. After connecting
your Bluetooth
®
device to your car,
use the Bluetooth®
features.
• You will not be able to use the handsfree feature when your
phone is outside of the cellular
s ervice area (e.g. in a tunnel, in a
underground, in a mountainous
area, etc.).
• If the cellular phone si gnal is poor
or the vehicles interior noise is too
loud, it may be difficult to hear the
other person’s voice during a call.
• Do not place the Bluetooth
®
device
near or inside metallic objects, oth-
erwise communications with
Bluetooth
®
system or cellular serv-
ice stations can be disturbed.
• Placing the audio system within an electromagne tic environment may
result in noise interference.
(Continued)(Continued)
• Some Bluetooth
®
devices may
cause interference noise or mal-
function to audio system. In this
case, store the device in a different
location may resolve the condition.
• While a device is connected through Bluetooth
®, your device
may discharge quicker than usual
for additional Bluetooth
®-related
operations.
• The handsfree call volume and quality may differ depending on the
Bluetooth
®
device.
• If Connection Priority is set upon vehicle ignition (IGN/ACC ON), the
Bluetooth
®
device will be automat-
ically connected. Even if you are
outside, the Bluetooth
®
device will
be automatically connected once
you are in the vicinity of the vehi-
cle. If you do not want to automati-
cally connect your Bluetooth
®
device, turn off the Bluetooth
®
fea-
ture in your Bluetooth
®
device.
(Continued) (Continued)
• In some Bluetooth
®
devices, start-
ing the ignition while talking
through Bluetooth®
enabled
handsfree call will result in the call
becoming disconnected due to car
handsfree call transfer. If you use
your phone outside the vehicle,
turn off the Bluetooth
®
feature in
your phone.
NOTICE