2015 Hyundai Accent But

Maintenance
74 7
High-corrosion areas
If you live in an area where your car is
regularly exposed to corrosive materials,
corrosion protection is particularly impor-
tant. Some of the common causes of
accelerated corrosion are road salts,
dust control chemicals, ocean air and
industrial pollution.Moisture breeds corrosion
Moisture creates the conditions in which
corrosion is most likely to occur. For
example, corrosion is accelerated by
high humidity, particularly when tempera-
tures are just above freezing. In such
conditions, the corrosive material is kept
in contact with the car surfaces by mois-
ture that is slow to evaporate.
Mud is particularly corrosive because it is
slow to dry and holds moisture in contact
with the vehicle. Although the mud
appears to be dry, it can still retain the
moisture and promote corrosion.
High temperatures can also accelerate
corrosion of parts that are not properly
ventilated so the moisture can be dis-
persed. For all these reasons, it is par-
ticularly important to keep your car clean
and free of mud or accumulations of
other materials. This applies not only to
the visible surfaces but particularly to the
underside of the car.To help prevent corrosion
You can help prevent corrosion from get-
ting started by observing the following:
Keep your car clean
The best way to prevent corrosion is to
keep your car clean and free of corrosive
materials. Attention to the underside of
the car is particularly important.
If you live in a high-corrosion area —
where road salts are used, near the
ocean, areas with industrial pollution,
acid rain, etc.—, you should take extra
care to prevent corrosion. In winter,
hose off the underside of your car at
least once a month and be sure to
clean the underside thoroughly when
winter is over.

775
Maintenance

give particular attention to the compo-
nents under the fenders and other
areas that are hidden from view. Do a
thorough job; just dampening the accu-
mulated mud rather than washing it
away will accelerate corrosion rather
than prevent it. Water under high pres-
sure and steam are particularly effec-
tive in removing accumulated mud and
corrosive materials.

rocker panels and frame members, be
sure that drain holes are kept open so
that moisture can escape and not be
trapped inside to accelerate corrosion.
Keep your garage dry
Don't park your car in a damp, poorly
ventilated garage. This creates a favor-
able environment for corrosion. This is
particularly true if you wash your car in
the garage or drive it into the garage
when it is still wet or covered with snow,
ice or mud. Even a heated garage can
contribute to corrosion unless it is well
ventilated so moisture is dispersed.Keep paint and trim in good condition
Scratches or chips in the finish should be
covered with "touch-up" paint as soon as
possible to reduce the possibility of cor-
rosion. If bare metal is showing through,
the attention of a qualified body and paint
shop is recommended.
Bird droppings : Bird droppings are high-
ly corrosive and may damage painted
surfaces in just a few hours. Always
remove bird droppings as soon as possi-
ble.
Don't neglect the interior
Moisture can collect under the floor mats
and carpeting to cause corrosion. Check
under the mats periodically to be sure
the carpeting is dry. Use particular care if
you carry fertilizers, cleaning materials or
chemicals in the car.
These should be carried only in proper
containers and any spills or leaks should
be cleaned up, flushed with clean water
and thoroughly dried.Interior care
Interior general precautions
Prevent chemicals such as perfume, cos-
metic oil, sun cream, hand cleaner, and
air freshener from contacting the interior
parts because they may cause damage
or discoloration. If they do contact the
interior parts, wipe them off immediately.
See the instructions for the proper way to
clean vinyl.
CAUTION
Never allow water or other liquids
to come in contact with electri-
cal/electronic components inside
the vehicle as this may damage
them.
When cleaning leather products
(steering wheel, seats etc.), use
neutral detergents or low alcohol
content solutions. If you use high
alcohol content solutions or
acid/alkaline detergents, the color
of the leather may fade or the sur-
face may get stripped off.

Maintenance
76 7
Cleaning the upholstery and interior
trim
Vinyl
Remove dust and loose dirt from vinyl
with a whisk broom or vacuum cleaner.
Clean vinyl surfaces with a vinyl cleaner.
Fabric
Remove dust and loose dirt from fabric
with a whisk broom or vacuum cleaner.
Clean with a mild soap solution recom-
mended for upholstery or carpets.
Remove fresh spots immediately with a
fabric spot cleaner. If fresh spots do not
receive immediate attention, the fabric
can be stained and its color can be
affected. Also, its fire-resistant properties
can be reduced if the material is not
properly maintained.
Cleaning the lap/shoulder belt web-
bing
Clean the belt webbing with any mild
soap solution recommended for cleaning
upholstery or carpet. Follow the instruc-
tions provided with the soap. Do not
bleach or re-dye the webbing because
this may weaken it.
Cleaning the interior window glass
If the interior glass surfaces of the vehi-
cle become fogged (that is, covered with
an oily, greasy or waxy film), they should
be cleaned with glass cleaner. Follow the
directions on the glass cleaner container.
CAUTION
Using anything but recommended
cleaners and procedures may affect
the fabric’s appearance and fire-
resistant properties.
CAUTION
Do not scrape or scratch the inside
of the rear window. This may result
in damage to the rear window
defroster grid.

Specifications, Consumer information, Reporting safety defeccts
4 8
RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct
lubricants also help promote engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
*1Refer to the recommended SAE viscosity numbers on the next page.
*2Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing
the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s
time, they can offer significant cost and energy savings.
*
3If the API service SM engine oil is not available in your country, you are able to use API service SL.
LubricantVolumeClassification
Engine oil *1 *2 (drain and refill)
Recommends
3.8 US qt. (3.6 l)API Service SM*3,
ILSAC GF-4 or above
Manual transaxle fluid1.9 ~ 2.01 US qt.
(1.8~1.9 l)
HA SYN MTF (SK),
HD SYN MTF (H.K.SHELL),
GS PAO MTF (GS CALTEX),
API GL-4, SAE 75W/85 (HYUNDAI Genuine transaxle fluid)
Automatic transaxle fluid7.71 US qt. (7.3 l)
MICHANG ATF SP-4, SK ATF SP-4
NOCA ATF SP-4, HYUNDAI genuine ATF SP-4 or other
brands meeting the above specification approved by
Hyundai Motor Co.,
Coolant 4.7 US qt. (5.3 l)Mixture of antifreeze and water (Ethylene glycol base
coolant for aluminum radiator)
Brake/clutch fluid0.7~0.8 US qt. (0.7~0.8 l)FMVSS116 DOT-3 or DOT-4
Fuel11.4 US gal. (43 l)Unleaded gasoline

I7
Index
Parking brake ·································································5-17
Parking brake ·································································7-26
Power brakes··································································5-16
Power outlet ···································································4-88
Power window lock button ············································4-19
Pre-tensioner seat belt····················································3-20
Push starting·····································································6-5
Rear center belt ······························································3-18
Rear seat···········································································3-9
Recommended cold tire inflation pressures ··················7-36
Recommended lubricants and capacities ·························8-4
Recommended SAE viscosity number························8-5
Refrigerant label ······························································8-7
Remote keyless entry ·······················································4-6
Replacement light bulb ··················································7-61
Road warning ···································································6-2
Rocking the vehicle ·······················································5-34
Roof antenna ··································································4-94Scheduled maintenance service ·······································7-6
Maintenance under severe usage conditions ·············7-18
Normal maintenance schedule ····································7-7
Seat belt warning ···························································3-15
Seat belts ········································································3-14
Rear center belt ·························································3-18
Height adjustment ·····················································3-16
Pre-tensioner seat belt ···············································3-20
Seat belt - Driver's 3-point system ····························3-16
Seat belt warning·······················································3-15
Seat belts - Front passenger and rear seat ·················3-17
Seatback pocket ·······························································3-8
Seating capacity ·····························································5-43
Seats ·················································································3-2
Armrest(front) ·····························································3-6
Folding the rear seat ··················································3-11
Front seat adjustment ··················································3-5
Headrest(front) ····························································3-6
Headrest(rear) ······························································3-9
Rear seat ······································································3-9
Seatback pocket···························································3-8
Side impact air bag ························································3-50
Sliding armrest ·······························································4-84
Smooth cornering···························································5-35
Snow tires ······································································5-38
PS
R

I9
Index
Tires and wheels ······························································8-3
Towing ···········································································6-31
Towing capacity ·····························································5-43
Transaxle
Automatic transaxle ··················································5-10
Manual transaxle ·························································5-7
Trip computer ································································4-39
Trunk ··············································································4-12
Vehicle break-in process ··················································1-5
Vehicle capacity weight ·················································5-42
Vehicle certification label ················································8-6
Vehicle curb weight ·······················································5-47
Vehicle data collection and event data recorders ············1-6
Vehicle identification number (VIN) ·······························8-6
Vehicle load limit ···························································5-42
Cargo capacity ···························································5-43
Certification label ······················································5-45
Seating capacity ························································5-43
Steps For Determining Correct Load Limit ··············5-43
Tire and loading information label····························5-42
Towing capacity ························································5-43
Vehicle capacity weight ············································5-42
Vehicle stability management ········································5-25
Vehicle weight ·······························································5-47
Base curb weight ·······················································5-47Cargo weight ·····························································5-47
GAW (Gross axle weight) ·········································5-47
GAWR (Gross axle weight rating)····························5-47
GVW (Gross vehicle weight)····································5-47
GVWR (Gross vehicle weight rating) ······················5-47
Vehicle curb weight···················································5-47
Volume/weight ·································································8-3
Warning and indicators ··················································4-43
Washer fluid ···································································7-26
Weight/volume ·································································8-3
Wheel alignment and tire balance ·································7-39
Wheel replacement ························································7-42
Windows ········································································4-16
Auto down window ···················································4-18
Auto up/down window ··············································4-18
Power window lock button ·······································4-19
Windshield defrosting and defogging····························4-81
Defogging logic·························································4-83
Winter driving ································································5-38
Snow tires ··································································5-38
Tire chains ·································································5-39
Wiper blades ··································································7-31
Wipers and washers ·······················································4-57
V
W