23
INSTRUMENT PANEL INDICATORSBriefly appear with each engine start. Red and amber indicators are most critical. Blue
and green indicators are used for general information. See your Owner’s Manual for
more information.
Malfunction IndicatorsIf an indicator remains on, there may be a problem; see your dealer
On/Off Indicators
Condition IndicatorsAction is needed by driver
PASSENGER AIRBAG OFF(located on center panel)
SIDE AIRBAG OFF
CRUISE CONTROL onECOFuel economy on
Fog lights on*
Exterior lights on
Turn signals/hazards on
High beams on
*if equipped
Charging system
Low brake fluid, Brake system
Low oil pressure
Anti-Lock Brake System (ABS)
Variable Torque Management
(VTM-4) (4WD only)
Malfunction lamp
(check engine light)
Vehicle Stability Assist®(VSA) Supplemental Restraint System
(SRS)
Daytime Running Lights (DRL)
Power tailgate*Tire Pressure Monitoring System
(TPMS)
Parking brake on:
Release
Door/Tailgate open:
Close door(s) / tailgate
Seat belt reminder:
Fasten seat belt(s) Maintenance Minder™:
Make dealer appointment
A/T temperature (4WD only):
Pull over and let engine idle
Starter system: Hold ignition
switch in START (III) for
up to 15 seconds
Low fuel:
Refill
Low tire pressure:
Add airImmobilizer (blinks):
Use other vehicle key and
see dealer
VTM-4 (blinks):
Pull over and let engine idle
CRUISE MAIN on VSA OFF
15 Pilot_Lx-Ex-SE-Exl-ExlRes_KA_English_TRG_AQS51289_ATG_NEW STYLE 5/8/2014 1:17 PM Page 3
98
HOMELINK® (if equipped)
Program your vehicle to operate up to three remote-controlled devices around your
home, such as garage doors, lighting, or home security systems.
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again.Training
complete
YES NO
HomeLink indicator
flashes for 2 seconds,
then remains on.HomeLink LED
remains on.YES NOYES NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate. Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink, see the owner’s manual included
with the device you are trying to program, call HomeLink at (800) 355-3515, or
visit www.homelink.com.
How It Works
Press and hold RETURN for
about 3 seconds.
REARVIEW CAMERA
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
Turning the Guidelines On or Off
• When you shift into Reverse (R), a real-time image of the area behind your vehicle
is shown in the center display.
• Yellow parking guidelines also appear to help you judge distance.
• The rearview display turns off when you shift out of Reverse.
15 Pilot_Lx-Ex-SE-Exl-ExlRes_KA_English_TRG_AQS51289_ATG_NEW STYLE 5/8/2014 1:17 PM Page 6
