2015 HONDA CR-V light

[x] Cancel search: light

Page 483 of 533

HONDA CR-V 2015 RM1, RM3, RM4 / 4.G Owners Manual 482
uuCleaning uExterior Care
Maintenance
The inside lenses of exterior lights (headlig hts, brake lights, etc.) may fog temporarily 
if you have driven in the rain, or after the vehicle has been run

Page 486 of 533

HONDA CR-V 2015 RM1, RM3, RM4 / 4.G Owners Manual 485Continued
Handling the Unexpected
If a Tire Goes Flat
Changing a Flat Tire
If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually 
to reduce speed. Then, stop in a

Page 492 of 533

HONDA CR-V 2015 RM1, RM3, RM4 / 4.G Owners Manual 491
Handling the Unexpected
Engine Does Not Start
Checking the Engine
If the engine does not start, check the starter.
Starter conditionChecklist
Starter doesn’t turn or turns 
over slowly.
The batt

Page 495 of 533

HONDA CR-V 2015 RM1, RM3, RM4 / 4.G Owners Manual 494
Handling the Unexpected
Jump Starting
Turn off the power to electric devices, such as audio and lights. Turn off the engine, 
then open the hood. 1.Connect the first jump er cable to your 
vehicle

Page 498 of 533

HONDA CR-V 2015 RM1, RM3, RM4 / 4.G Owners Manual 497Continued
Handling the Unexpected
Overheating
How to Handle Overheating
Overheating symptoms are as follows:
•The temperature gauge needle is at the   mark or the engine suddenly loses 
power.

Page 500 of 533

HONDA CR-V 2015 RM1, RM3, RM4 / 4.G Owners Manual 499
Handling the Unexpected
Indicator, Coming On/Blinking
If the Low Oil Pressure Indicator Comes On
■Reasons for the indicator to come on
Comes on when the engine oil pressure is low.
■What to do

Page 502 of 533

HONDA CR-V 2015 RM1, RM3, RM4 / 4.G Owners Manual 501
uuIndicator, Comin g On/BlinkinguIf the Brake System Indicator (Red) Comes On
Handling the Unexpected
If the Brake System Indicator (Red) Comes On
■Reasons for the indicator to come on
• The b

Page 504 of 533

HONDA CR-V 2015 RM1, RM3, RM4 / 4.G Owners Manual 503Continued
Handling the Unexpected
Fuses
Fuse Locations
If any electrical devices are not working, 
turn the ignition switch to LOCK 
(0*1 and 
check to see if any appl icable fuse is blown.
Fuse lo