Ford part number /
Ford specification
Ford part name or
equivalent
Capacity
Item
4.3 qt (4.1 L)
1.6L EcoBoost
engine oil 5, 6, 7 CXO-5W20-LFS12 or
CXO-5W20-LSP12 (Canada) /
Motorcraft SAE 5W-
20 Premium
Synthetic Blend Motor Oil WSS-M2C945-A
XO-5W30-QFS orXO-5W30-QSP (U.S.);
Motorcraft SAE 5W-
30 Full Synthetic Motor Oil or
5.7 qt (5.4 L)
2.0L EcoBoost
engine oil 5, 6, 7
CXO-5W30-LFS12 orCXO-5W30-LSP12 (Canada)
Motorcraft SAE 5W-
30 Premium
Synthetic Blend Motor Oil WSS-M2C946-A
XO-5W20-QFS orXO-5W20-QSP (U.S.);
Motorcraft SAE 5W-
20 Full Synthetic Motor Oil or
5.71 qt (5.4 L)
2.5L engine oil 5, 6, 7
CXO-5W20-LFS12 orCXO-5W20-LSP12 (Canada) /
Motorcraft SAE 5W-
20 Premium
Synthetic Blend Motor Oil WSS-M2C945-A
VC-3DIL-B (U.S.);
Motorcraft Orange
Antifreeze/Coolant Prediluted
11.1 qt (10.5 L)
1.5L EcoBoost
engine coolant 8
CVC-3DIL-B
(Canada) /
8.45 qt (8 L)
1.6L EcoBoost
engine coolant 8 WSS-M97B44-D2
8.9 qt (8.4 L)
2.0L EcoBoost
engine coolant 8
7.2 qt (6.8 L)
2.5L engine
coolant 8
ZC-32-B2 (U.S.) /
Motorcraft Premium
Windshield Washer Concentrate With Bitterant (U.S.)
Fill as required
Windshield washer
fluid WSB-M8B16-A2
CXC-37-(A, B, D, and F) (Canada) /
Premium Quality
Windshield Washer Fluid (Canada) WSB-M8B16-A2
Not applicable
Not applicable
16.5 gal (62.5 L)
Front-wheel drive
fuel tank
317
Fusion/Mondeo (CC7), enUSA Capacities and Specifications
Ford part number /
Ford specification
Ford part name or
equivalent
Capacity
Item
WSH-M1C231-A
1 Ford recommends using Motorcraft (Ford) DOT 4 Low Viscosity (LV) High Performance
Brake Fluid, or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the
recommended fluid may cause degraded brake performance and not meet the Ford
performance standards. Keep brake fluid clean and dry. Contamination with dirt, water,
petroleum products or other materials may result in brake system damage and possible
failure.
2 Approximate dry fill capacity. Actual amount may vary during fluid changes.
3 Automatic transmissions that require Motorcraft MERCON LV transmission fluid should
only use Motorcraft MERCON LV transmission fluid.
Use of any fluid other than the recommended fluid may cause transmission damage.
Change the automatic transmission fluid and filter at the correct service interval. See
Scheduled Maintenance (page 458).
4 See your authorized dealer for fluid level checking or filling.
5 Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets
Ford specifications. Motor oils of the recommended viscosity grade that meet API SN
requirements and display the API Certification Mark for gasoline engines are also
acceptable. Do not use oil labeled with API SN service category unless the label also
displays the API certification mark.
6 Do not use oils labeled as API SN unless the label also displays the API certification mark.
These oils do not meet the requirements of your vehicle's engine and emissions system.
7 Do not use supplemental engine oil additives in your engine. They are unnecessary and
could lead to engine damage not covered by your Ford warranty.
8 Add the coolant type originally equipped in your vehicle.
319
Fusion/Mondeo (CC7), enUSA Capacities and Specifications
