2015 FORD FLEX cruise control

54
1 POWER TILT
AND TELESCOPE
STEERING COLUMN *
Use the controls to adjust
the steering wheel to your
desired position.
2 CRUISE CONTROL To set your cruise
control speed:
A . Press the ON control up
and release.
B. Accelerate to the
desired speed.
C. Press the SET control up
and release, then take your
foot off the accelerator.
To disable, press the OFF
control down.
3 LEFT VEHICLE
INFORMATION DISPLAY Provides information about
various systems on your
vehicle. Use the left, 5-way
controls, located on the
steering wheel, to choose
and confirm settings and
messages. Refer to the
Information Displays chapter
of your Owner’s Manual for
more information.
4 SERVICE ENGINE
SOON LIGHT Illuminates briefly when
you switch the ignition on. If it
remains on or blinks after you
start the engine, the On-Board
Diagnostics system (OBD-II)
has detected a problem. Drive
in a moderate fashion and
contact your authorized dealer
as soon as possible.
5 RIGHT VEHICLE
INFORMATION DISPLAY * Displays information about
Entertainment, Phone and
Navigation*. Use the right,
5-way controls located on
your steering wheel to scroll
through, highlight and make
minor adjustments within a
selected menu. Refer to the
MyFord Touch chapter in your
Owner’s Manual for
more information.
6 STEERING WHEEL
AUDIO AND MEDIA
CONTROLS
Press VOL+ or – to
increase or decrease
volume levels. Press
SEEK
or to
access the next or previous
radio station preset, CD
track or preset satellite
radio channel*.
Press
to access
voice recognition.
Press
to connect or
disconnect a phone call.
7 PUSH BUTTON START * Allows you to start your vehicle
by pressing the ENGINE
START STOP button while
fully pressing down on the
brake pedal. Press the button
again to switch the engine off.
If you leave your vehicle idling
for an extended period of
time, the engine shuts down
automatically. Before this
happens, a message appears
in the information display,
allowing you time to override
the shutdown feature.
Note: Your intelligent
access transmitter* must
be inside the vehicle for the
ignition to start.
8 HAZARD CONTROL
1256 783
4
.
54*IF EQUIPPED
FLEXINSTRUMENT PANELFLEX

1716
ADAPTIVE CRUISE CONTROL*
Allows you to set a ‘gap distance’ between your vehicle and the ve\
hicle in front of you in the same lane during
highway driving. When your cruise control is active, press GAP up or down to select the ga\
p distance. Refer
to the Cruise Control chapter of your Owner’s Manual for more information.
Note: Driving aids do not replace the need to watch where the vehicle is moving and brake where
necessary. Refer to your Owner’s Manual for safety information, more details and limitations.
POWER LIFTGATE *
Your liftgate has an automatic open and close feature. To open remotely, press twice on your remote
within three seconds. Press twice again to close or reverse the movement. You can also operate the
liftgate by pressing the button on the instrument panel.
ACTIVE PARK ASSIST *
The system detects an available parallel parking space and automatically \
steers the vehicle into that space
(hands-free) while you control the accelerator, gearshift and brakes. The system visually and audibly instructs
you to park the vehicle.
- To start active park assist, press the AUTO |P| button.
- To stop the parking procedure, grab the steering wheel or press the contr\
ol again.
For complete information, refer to the Parking Aids chapter of your Owner’s Manual.
COLLISION WARNING SYSTEM *
This system is designed to alert you of certain collision risks. A radar detects if your vehicle is rapidly
approaching another vehicle traveling in the same direction as yours. If it is, a red warning light comes on and
an audible warning tone sounds.
FUNCTIONFLEX
*IF EQUIPPED
FUNCTION
SELECTSHIFT AUTOMATIC® TRANSMISSION*
Use this feature to change gears
manually. To use, move the gearshift
lever from drive (D) to sport (S).
Depending on your vehicle, use the
thumb switch on the side of your
gearshift lever or paddle shifters on
your steering wheel to make shifts.
With the paddle shifters:
- Pull the right paddle (+) to upshift.
- Pull the left paddle (–)
to downshift.
With the thumb switch:
- Press (+) to upshift.
- Press (–) to downshift.
REAR VIEW CAMERA *
This system displays what is behind your vehicle when you place the
transmission in reverse (R). The system uses fixed guidelines that show
your vehicle’s actual path when you back up in a straight line. This can
be helpful when backing into a parking space or aligning the vehicle with
another object directly behind you.
REVERSE SENSING SYSTEM
This system sounds a warning tone if there is an obstacle near the
vehicle’s rear bumper when the vehicle is in reverse (R) and is traveling
less than 3 mph (5 km/h). The warning tone increases in frequency as
the object gets closer.
Note: Visibility aids do not replace the need to watch where
the vehicle is moving. Refer to your Owner’s Manual for safety
information, details and limitations.
BLIND SPOT INFORMATION SYSTEM (BLIS®)
WITH CROSS TRAFFIC ALERT *
BLIS uses radar sensors to help you determine if a vehicle may be in your
blind spot zone. Cross traffic alert alerts you if a car is coming toward
you as you back out of a parking space. Both features display a yellow
indicator light in your exterior mirrors. Cross traffic alert also sounds an
alarm and displays messages to warn you from which direction vehicles
are approaching. Refer to the Driving Aids chapter in your Owner’s
Manual for more information.
*IF EQUIPPED