2015 FORD EDGE key fob

•
Various vehicle speed minders can be
set. Once you select a speed, it will be
shown in the display, followed by an
audible tone when the preselected
vehicle speed is exceeded.
• Audio system maximum volume of
45%. A message will be shown in the
display when you attempt to exceed
the limited volume. Also, the
speed-sensitive or compensated
automatic volume control will be
disabled.
• Always on setting. When this is
selected, you will not be able to switch
off Advance Trac or traction control,
911 Assist or Emergency Assist, or the
do not disturb feature (if your vehicle
is equipped with these features).
CREATING A MYKEY
Use the information display to create a
MyKey:
1. Insert the key you want to program into
the ignition. If your vehicle is equipped with
a push-button start, place the intelligent
access key fob into the backup slot. The
location of your backup slot is in another
chapter. See Starting and Stopping the
Engine (page 150).
2. Switch the ignition on.
3. Access the main menu on the
information display controls, and select
Settings
then MyKey by pressing OK or
the > button.
4. Press
OK or the > button to select
Create MyKey.
5. When prompted, hold the
OK button
until you see a message informing you to
label this key as a MyKey. The key will be
restricted at the next start. MyKey is successfully created. Make sure
you label it so you can distinguish it from
the admin keys.
You can also program configurable
settings for the key(s). See
Programming/Changing Configurable
Settings
.
Programming/Changing
Configurable Settings
Use the information display to access your
configurable MyKey settings.
1. Switch the ignition on using an admin key or fob.
2. Access the main menu on the information display controls, and select
Settings
, then MyKey by pressing OK
or > button.
3. Use the arrow buttons to get to a feature.
4. Press
OK or > to make a selection.
Note: You can clear or change your MyKey
settings at any time during the same key
cycle as you created the MyKey. Once you
have switched the vehicle off, however, you
will need an admin key to change or clear
your MyKey settings.
CLEARING ALL MYKEYS
You can clear or change your MyKey
settings using the information display
control on the steering wheel. See
Information Displays
(page 100).
Switch the ignition on using an admin key
or fob.
55
Edge/Galaxy/S-MAX (CDQ), enUSA, First Printing MyKey
™

Saving a PreSet Position
1. Switch the ignition on.
2. Adjust the seat, exterior mirrors, and
steering column to your desired
position.
3. Press and hold the desired preset button until you hear a single tone.
You can save up to three preset memory
positions. You can save a memory preset
at any time.
Recalling a PreSet Position
Press and release the preset button
associated with your desired driving
position. The seat, mirrors, and steering
column move to the position stored for
that preset.
Note: You can only recall a preset memory
position can only be recalled when the
ignition is off, or when the transmission is in
park (P) or neutral (N) (and your vehicle is
not moving) if the ignition is on. You can also recall a preset memory
position by:
•
Pressing the unlock button on your
intelligent access key fob if it is linked
to a preset position.
• Unlocking the intelligent driver door
handle if a linked key fob is present.
• Entering a personal entry code on the
Securicode keypad. See Locks (page
60).
Note: Using a linked key fob to recall your
memory position when the ignition is off
moves the seat to the Easy Entry position.
Note: Pressing any active memory feature
adjustment control - power seat, mirror or
steering column switch (or any memory
button) during a memory recall cancels the
operation.
Linking a PreSet Position to your
Remote Control or Intelligent
Access Key Fob
You can save preset memory positions for
up to three remote controls or intelligent
access (IA) keys.
1. With the ignition on, move the memory
positions to the desired positions.
2. Press and hold the desired preset button for about five seconds. A tone
will sound after about two seconds.
Continue holding until a second tone
is heard.
3. Within three seconds, press the lock button on the remote control you are
linking.
To unlink a remote control, follow the
same procedure – except in step 3, press
the unlock button on the remote control.
Note: If more than one linked remote
control or intelligent access key is in range,
the memory function moves to the settings
of the first key to initiate a memory recall.
138
Edge/Galaxy/S-MAX (CDQ), enUSA, First Printing SeatsE142554

Instrument Cluster.........................................93
Instrument Lighting Dimmer.....................83
Interior Lamps
.................................................85
Front Interior Lamp............................................. 85
Rear Interior Lamp............................................... 87
Interior Mirror...................................................90 Auto-Dimming Mirror......................................... 90
Introduction.........................................................7
J
Jump Starting the Vehicle........................239 Connecting the Jumper Cables.................... 239
Jump Starting..................................................... 240
Preparing Your Vehicle..................................... 239
Removing the Jumper Cables....................... 240
K
Keyless Entry
...................................................68
SECURICODE™ KEYLESS ENTRY
KEYPAD.............................................................. 68
Keyless Starting - Vehicles With: Push Button Start................................................150
Ignition Modes...................................................... 151
Keys and Remote Controls.........................47
L
Lane Keeping System................................204 Switching the System On and Off..............205
Lighting Control
...............................................81
Headlamp Flasher............................................... 82
High Beams............................................................. 81
Lighting...............................................................81 General Information............................................. 81
Load Carriers See: Roof Racks and Load Carriers..............217
Load Carrying
..................................................217
Load Limit........................................................218 Special Loading Instructions for Owners of
Pick-up Trucks and Utility-type
Vehicles............................................................. 225
Vehicle Loading - with and without a Trailer.................................................................. 218Locking and Unlocking................................60
Activating Intelligent Access............................ 62
Autolock .................................................................. 63
Auto Relock............................................................ 63
Autounlock............................................................. 63
Battery Saver......................................................... 64
Enabling or Disabling Autolock and Autounlock........................................................ 63
Illuminated Entry.................................................. 63
Illuminated Exit..................................................... 64
Locking and Unlocking the Doors with the Key Blade............................................................. 61
Power Door Locks................................................ 60
Remote Control.................................................... 60
Smart Unlocks for Integrated Keyhead Transmitter........................................................ 62
Smart Unlocks for Intelligent Access Keys...................................................................... 62
Locks..................................................................60
Lug Nuts See: Changing a Road Wheel......................... 315
M
Maintenance.................................................258 General Information......................................... 258
Manual Climate Control - Vehicles With: Electronic Manual Temperature
Control (EMTC)
..........................................124
Manual Liftgate..............................................64 Closing the Liftgate............................................. 65
Opening the Liftgate........................................... 64
Manual Seats
.................................................135
Media Hub......................................................353
Memory Function
..........................................137
Easy Entry and Exit Feature............................ 139
Linking a PreSet Position to your Remote Control or Intelligent Access Key
Fob...................................................................... 138
Saving a PreSet Position................................. 138
Message Center See: Information Displays............................... 100
Mirrors See: Heated Windows and Mirrors................131
See: Windows and Mirrors............................... 88
Mobile Communications Equipment
.......12
Moonroof............................................................91 Opening and Closing the Moonroof...............91
500
Edge/Galaxy/S-MAX (CDQ), enUSA, First Printing Index