2015 FIAT PANDA technical specifications

Weights (kg) 1.2 8V 69 HP 1.2 8V 69 HP LPG 1.3 16V MultiJet
Unladen weight (with all fluids, fuel tank 90% full and
without optional equipment):940 980 1035
Payload including the driver:
(*)480 (4-seater) /
470480 (4-seater) /
Maximum permitted loads
(**)
– front axle: 770 770 855
– rear axle: 760 760 760
– total:1420 (4-seater) /
14501515 (4-seater) /
Towable loads
– braked trailer: 800
(***)900
– non-braked trailer: 400
(***)400
Maximum load on roof: 55 55 55
Maximum load on ball joint (braked trailer): 60
(***)60
(*) If special equipment is fitted (sun roof, tow hitch, etc.) the unladen vehicle weight increases, thus reducing the specified payload in relation to the maximum
permitted loads.
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or load platform within the maximum permitted loads.
(***)IMPORTANT A trailer cannot be towed so there are no provisions for fitting a tow hook.
156
TECHNICAL SPECIFICATIONS
500 (5-seater) 500 (5-seater)
1440 (5-seater) 1535 (5-seater)

Panda VAN versions
Weights (kg) 0.9 TwinAir 65 HP0 . 9 TwinAir Turbo
HP0.9 TwinAir Turbo 0.9 TwinAir Turbo
Natural Power
Unladen weight (with all fluids, fuel tank
90% full and without optional
equipment):950 (2-seater) /
980 1035 1075
Payload including the driver:
(*)505 (2-seater) /
490 510 460
Maximum permitted loads
(**)
– front axle: 770 855 875 875
– rear axle:770 (2-seater) /
780 810 810
– total:1455 (2-seater) /
1470 1545 1535
Towable loads
– braked trailer: 800 800 800
(***)
– non-braked trailer: 400 400 400(***)
Maximum load on roof: 60 60 55 55
Maximum load on ball joint (braked
trailer):60 60 60
(***)
(*) If special equipment is fitted (sun roof, tow hitch, etc.) the unladen vehicle weight increases, thus reducing the specified payload in relation to the maximum
permitted loads.
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or load platform within the maximum permitted loads.
(***)IMPORTANT A trailer cannot be towed so there are no provisions for fitting a tow hook.
158
TECHNICAL SPECIFICATIONS
8 5 HP 4x4
85
960 (4-seater)
490 (4-seater)
780 (4-seater)
1450 (4-seater)

SUPPLIES
0.9 TwinAir 0.9 TwinAir
Turbo1.2 8V 69 HP Prescribed fuels and original lubricants
Fuel tank (litres): 37
37/35(*)37
Unleaded petrol not less than 95 RON (EN 228
specification)
including a reserve of (litres): 5 ÷ 7 5 ÷ 7 5 ÷ 7
Engine cooling system (litres): 4.8 5.2 4.6Mixture of 50% distilled water and 50%
PARAFLU
UP(**)
Engine sump (litres): 2.8 2.8 2.5SELENIA DIGITEK P.E (0.9 TwinAir and 0.9
TwinAir Turbo versions) / SELENIA K P.E. (1.2 8V
69 HP versions) / SELENIA MULTIPOWER GAS
5W-40 (LPG versions) Engine sump and filter (litres): 3.2 3.2 2.8
Gearbox casing/differential: 1.65 (litres)1.65 (litres) /
(***)1.65 (litres)TUTELA TRANSMISSION TECHNYX (0.9
TwinAir, 0.9 TwinAir Turbo and 1.2 8V 69 HP
versions) / TUTELA TRANSMISSION
GEARFORCE (LPG and Natural Power versions)
Rear differential (kg)
(***):- 0.62 - TUTELA TRANSMISSION CROSS
Dualogic gearbox hydraulic
activation system (litres):- 0.7 - TUTELA CS SPEED
Hydraulic brake circuit (litres): 0.55 0.55 0.55 TUTELA TOP 4
Windscreen and rear window
washer fluid reservoir (litres):2.7 2.7 2.7Mixture of water and TUTELA PROFESSIONAL
SC35
(*) Trekking versions.
(**) When the vehicle is used in particularly harsh weather conditions, we recommend using a mixture of 60%PARAFLUUPand 40% demineralised water.
(***)Panda Cross and Panda 4x4 versions
160
TECHNICAL SPECIFICATIONS
60 HP/65 HP
1.7 (kg)

FLUIDS AND LUBRICANTS
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of
the Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission
specifications. Lubricant quality is crucial for engine operation and duration.
UseFluid and lubricant specifications for correct
vehicle operationOriginal fluids and
lubricantsReplacement interval
Lubricants for
petrol engines and
1.2 8V 69 HP
67)
SAE 5W-40 ACEA C3 grade totally synthetic
lubricant. FIAT Classification 9.55535-S2.SELENIA K P.E.
Contractual Technical
Reference No. F603.C07According to the Scheduled
Servicing Plan
Lubricants for
petrol engines 0.9
TwinAir and 0.9
TwinAir Turbo
67)
SAE 0W-30 ACEA C2 grade totally synthetic
lubricant. FIAT 9.55535-GS1 classification.SELENIA DIGITEK P.E.
Contractual Technical
Reference no. F020.B12According to the Scheduled
Servicing Plan
Lubricant for
petrol/LPG
engines
67)
SAE 5W-40 ACEA C3 grade totally synthetic
lubricant. FIAT 9.55535-T2 classification.SELENIA MULTIPOWER
GAS 5W-40
Contractual Technical
Reference No. F922.E09According to the Scheduled
Servicing Plan
Diesel engine
lubricants
67)
SAE 5W-30 ACEA C2 grade totally synthetic
lubricant. FIAT Classification 9.55535-S1.SELENIA WR P.E.
Contractual Technical
Reference No. F510.D07According to the Scheduled
Servicing Plan
In the case of emergency, if lubricants with the prescribed specifications are not available, products with the minimum indicated
ACEA performance can be used for topping up; in this case optimal performance of the engine is not guaranteed. For 0.9
TwinAir and 0.9 TwinAir Turbo engines, only use lubricants with indicated SAE grade and specifications.
WARNING
67)The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty.
162
TECHNICAL SPECIFICATIONS

UseFluid and lubricant specifications for correct
vehicle operationOriginal fluids and lubricants Applications
Lubricants and
greases for drive
transmissionSAE 75W-85 grade synthetic-base lubricant. FIAT
Classification 9.55550-MX3.TUTELA TRANSMISSION
TECHNYX
Contractual Technical Reference
No. F010.B05Manual gearbox and
differential (0.9 TwinAir, 0.9
TwinAir Turbo and 1.2 8V
HP versions)
SAE 75W grade synthetic lubricant. FIAT 9.55550-
MZ6 classification.TUTELA TRANSMISSION
GEARFORCE
Contractual Technical Reference
no. F002.F10Manual gearbox and
differential (1.3 16V MultiJet,
LPG and Natural Power
versions)
Fully synthetic oil with dedicated additive. FIAT
9.55550-SA1 classification.TUTELA CS SPEED
Contractual Technical Reference
No. F005.F98Dualogic gearbox hydraulic
activation system
SAE 75W-85 grade synthetic lubricant. FIAT
Classification 9.55550 - DA4.TUTELA TRANSMISSION
CROSS
Contractual Technical Reference
No. F001.D12Rear differential
(°)
SAE 75W-85 grade synthetic lubricant, which
exceeds API GL5 specifications. FIAT 9.55550
classification - DA3.TUTELA TRANSMISSION
MULTIAXLE
Contractual Technical Reference
No. F426.E06Drive transmission idler unit
(PTU)
(°)
Molybdenum disulphide grease, for use at high
temperatures. NL.G.I. 1-2 consistency FIAT 9.55580
classificationTUTELA ALL STAR
Contractual Technical Reference
No. F702.G07Wheel side constant velocity
joints
Grease for constant velocity joints with low friction
coefficient. NL.G.I. 0-1 consistency FIAT 9.55580
classificationTUTELA STAR 700
Contractual Technical Reference
No. F701.C07Differential-side constant
velocity joints
Brake fluidSynthetic fluid for brake and clutch systems. Exceeds
specifications: FMVSS no. 116 DOT 4, ISO 4925 SAE
J1704 FIAT 9.55597 classificationTUTELA TOP 4
Contractual Technical Reference
No. F001.A93Hydraulic brakes and
hydraulic clutch controls
(°) Panda Cross and Panda 4x4 versions.
163
69

UseFluid and lubricant specifications for correct
vehicle operationOriginal fluids and lubricants Applications
Protective agent
for radiatorsRed protective agent with antifreeze action, based on
inhibited monoethylene glycol with organic formula.
Exceeds CUNA NC 956-16, ASTM D 3306
specifications. FIAT 9.55523 classificationPARAFLUUP(*)Contractual Technical Reference
No. F101.M01Cooling circuit usage
percentage: 50% water
50%PARAFLUUP(**)
Diesel fuel additiveAdditive for diesel with antifreeze and protective
action for diesel enginesTUTELA DIESEL ART
Contractual Technical Reference
No. F601.L06To be mixed with diesel
Windscreen/rear
window washer
fluidMixture of spirits and surfactants. Exceeds CUNA NC
956-11 specifications. FIAT 9.55522 classificationTUTELA PROFESSIONAL SC
35
Contractual Technical Reference
No. F201.D02To be used diluted or
undiluted in screen washer/
wiper systems
(*) IMPORTANT Do not top up or mix with other fluids which have different specifications from those described.
(**) When the vehicle is used in particularly harsh weather conditions, we recommend using a mixture of 60%PARAFLUUPand 40% demineralised water.
164
TECHNICAL SPECIFICATIONS
(25 cc per 10litres)

FUEL CONSUMPTION
The fuel consumption figures given in the tables below are determined on the basis of the type-approval tests laid down by
specific European Directives.
IMPORTANT The type of route, traffic conditions, weather conditions, driving style, general condition of the vehicle, trim
level/equipment/accessories, use of the climate control system, vehicle load, presence of roof racks and other situations that
adversely affect the aerodynamics or wind resistance lead to different fuel consumption values than those measured. The
fuel consumption will get more regular only after having driven the first 3000 km.
FUEL CONSUMPTION ACCORDING TO THE CURRENT EUROPEAN DIRECTIVE (litres/100 km)
NOTE Consumption of methane-fuelled Natural Power versions is intended in m
3/100 km.
Versions Urban Extra-urban Combined
0.9 TwinAir 60 HP(*)4.5 3.4 3.8
0.9 TwinAir 65 HP
5.0 / 4.8
(*)3.8 / 3.7(*)4.2 / 4.1(*)
0.9 TwinAir Turbo 80 HP(*)4.4 3.4 3.8
0.9 TwinAir Turbo 80 HP Dualogic
(*)4.4 3.4 3.8
0.9 TwinAir Turbo 85 HP
5.0 / 5.2
(**) / 4.9 (*)3.8 / 4.2(**) /3.8 (*)4.2 / 4.6(**) / 4.2 (*)
0.9 TwinAir Turbo 85 HP Dualogic4.8 3.7 4.1
0.9 TwinAir Turbo 85 HP 4x45.9 4.3 4.9
0.9 TwinAir Turbo 90 HP5.9 4.3 4.9
0.9 TwinAir Turbo Natural Power
5.8
(°) / 6.0 (°°)3.8(°) / 4.0 (°°)4.5(°) / 4.7 (°°)
1.2 8V 69 HP
6.7 / 6.5(*) / 5.9 (*)4.3 / 4.2(*) / 4.0 (*)5.2 / 5.0(*) /4.7 (*)
(*) For versions/markets, where provided.
(**) For Trekking versions.
(°) Running on petrol
(°°) Running on methane
166
TECHNICAL SPECIFICATIONS
1.2 8V 69 HP LPG
6.6(°) / 6.9 (°°°)4.3(°) / 6.3 (°°°)5.1(°) / 6.5 (°°°)
1.3 16V MultiJet 75 HP4.7
3.5 / 3.8(**)3.9 / 4.1(**)
1.3 16V MultiJet 75 HP 4x44.9 4.6 4.7
1.3 16V MultiJet 80 HP Cross4.9 4.6 4.7
(°°°) Running on LPG

168
TECHNICAL SPECIFICATIONS
PRESCRIPTIONS FOR HANDLING THE VEHICLE AT THE END OF
ITS LIFE
FCA has been committed for many years to safeguarding the environment through the constant improvement of its production
processes and manufacturing products that are increasingly "eco-compatible". To grant customers the best possible service
in terms of respecting environmental laws and in response to European Directive 2000/53/EC governing vehicles at the end of
their life, FCA is offering its customers the chance to hand over their vehicle at the end of its life without incurring any additional
costs. The European Directive sets out that when the vehicle is handed over, the last keeper or owner should not incur any
expenses as a result of it having a zero or negative market value.
To hand your vehicle over at the end of its life without extra cost, contact one of our dealerships if you are purchasing another
vehicle or an FCA-authorised collection and scrapping centre. These centres have been carefully chosen to offer high quality
service for the collection, treatment and recycling of vehicles at their end of life, respecting the surrounding environment.
You can find further information on these collection and scrapping centres either from an FCA dealership or by calling the
number in the Warranty Booklet or by consulting the websites of the various FCA brands.